FORMAT

The config file has the format described in isdnformat(5). I recommend starting isdnlog with -f/etc/isdn/isdn.conf, and storing all options in this file in section [options]. Read the man page for more details.

Isdnlog will always read the /etc/isdn/isdn.conf config file for the sections [global] [variables] and [isdnlog]; it will ignore other sections. To make isdnlog process the [options] section you must pass it with the -f option!

GLOBAL SECTION

This section holds common information for all isdn programs. All settings are for EuroISDN (DSS1).

AREACODE

Telephone area code of your city. With 1TR6 ISDN protocol you must specify your whole telephone number (without MSN). Required.

AREAPREFIX

Prefix for area code. Default is "0". Your area code may start with this prefix (e.g. "0721" and "721" is the same area code). Optional.

COUNTRYCODE

Telephone country code (e.g. 49 for Germany). Required.

COUNTRYPREFIX

Prefix for country code. Default is "+". Your country code may start with this prefix (e.g. "+49" and "49" is the same country code). Optional.

VARIABLES

The ISDN tools allow to set variables and use them later. All variables must be uppercase. Example : "MYPATH = /home/foo".

ISDNLOG

Settings for isdnlog.

VBN

The initial numbers of the alternate carrier prefix (to choose an alternate telephone provider). If there is more than one possible prefix, separate them with colons.

VBNLEN

The number of significant digits after the VBN prefix that identify the chosen carrier (provider). If there are different numbers possible, separate them with colons.

PRESELECTED

The default telephone carrier (provider), if no alternate carrier prefix is dialed.

COUNTRYFILE

Location and name of country.dat. This file contains country names, aliases, codes and prefixes.

RATECONF

Location and name of rate.conf. This file defines booked providers and provider variants.

RATEFILE

Location and name of rate-CC.dat, where CC is your country code. This file contains all the connection fees for all providers to various destinations at certain dates/times. See rate-files(5) for more info.

HOLIDAYS

Name and location of holiday-CC.dat.

ZONEFILE

Name and location of zone-CC-PPP.cdb. The provider PPP is taken from the D:-tag in rate-CC.dat and is substituted for '%s' in the configuration entry. This file contains domestic zone info for all areas of a country.

DESTFILE

Name and location of the destination database dest.cdb.

LOGFILE

Isdnlog will store a list of all calls in this file, and isdnrep will read this file to calculate isdn telephone costs. Default value is "/var/lib/isdn/calls". Optional.

RELOADCMD

Isdnlog can use this command to reactivate the isdn subsystem. Default value is "reload". Optional.

STOPCMD

Isdnlog can use this command to stop the isdn subsystem. Default value is "stop". Optional.

REBOOTCMD

Isdnlog can use this command to reboot linux (when all else fails). Default value is "/sbin/reboot". Optional.

CURRENCY

Cost per charge unit and currency. Default is "0.12,DM".

Note: the charge entry is not used anymore.

CHARGEMAX

Isdnlog can manage your isdn costs and prevent you from spending more than a maximum per day. Unit is national currency. Example: In Germany you want to set CURRENCY to "0.12,DM" and CHARGEMAX to "15.00", so you will spend max. 15 DM per day. Required.

CONNECTMAX

Isdnlog can also limit your online time in seconds per month. Example: "CONNECTMAX=18000,0" will allow you to be 5 hours online per month. Optional.

BYTEMAX

Isdnlog can also limit your transfer in bytes. Example: "BYTEMAX=67108864" will limit your transfer to 64 MB per month. Optional.

REPOPTIONS

General commandline options for isdnrep. The options noted here have the same effect as appended to each isdnrep commandline. Options are separated by ; instead of the usual space.

Example: "REPOPTIONS=-LP;-E" will turn off the provider summary and show failed calls. Optional.

VBOXPATH

Isdnrep can include information from the voice box system vbox in its report. To do this, you must specify the vbox spooldir (e.g. VBOXPATH=/var/spool/vbox/foo/incoming). Optional.

VBOXCMD1 VBOXCMD2

Isdnrep can convert vbox messages. To do this, you should supply a command. VBOXCMD1 is used with old vbox files (<2.0), VBOXCMD2 is used with new vbox files (>=2.0). Example: "VBOXCMD1=/usr/bin/zyxeltowav". Optional.

MGETTYPATH

Isdnrep can include information from the mgetty fax system in its report. To do this, you must specify the mgetty spooldir (e.g. MGETTYPATH=/var/spool/fax/incoming). Optional.

MGETTYCMD

Isdnrep can convert mgetty fax files. To do this, you should supply a command. Example: "MGETTYCMD=/usr/bin/g3tojpg". Optional.

START = { ... }

This option is ignored without -S flag or start=yes. Here you can instruct isdnlog to act on any event by starting a command. However, isdnlog can not react on outgoing connections from other isdn devices (e.g. an isdn telephone). Any start commands listed here are used for all connections, including connections from unknown telephone numbers. For more information, please read callerid.conf(5).

FORMAT OPTIONS

You can specify different format strings for the way isdnlog reports incoming messages, outgoing messages, isdnrep, and the WWW mode of isdnrep.

REPFMT

Format for isdnrep (normal mode). Default is " %X %D %15.15H %T %-15.15F %7u %U %I %O".

REPFMTWWW

Format for isdnrep (WWW mode). Default is "%X %D %17.17H %T %-17.17F -20.20l SI: %S %9u %U %I %O".

REPFMTxxx

Additional format strings for isdnrep.

ILABEL

Format for isdnlog (incoming connections). Isdnlog will add the additional information such as RING, TIME, CONNECT ...

OLABEL

Format for isdnlog (outgoing connections). Isdnlog will add the additional information such as RING, TIME, CONNECT ...

FORMAT MACROS

You can build the format string for any combination of normal chars, digits and these special cookies:

%t

tei

%C

Call reference

%Nx

Remote site's telephone number: %N0 exact number, %N1 isdnlog adds country and area prefix to number, %N2 isdnlog beautifies number and adds location, %N3 area code, %N4 number without area code, %N5 alias name, %N6 location, %N7 country code

%nx

Local site's telephone number (encoding like %N).

%cx

Telephone number as given by CLIP (encoding like %N).

%A

the text " alias <MSN>" if CLIP message, otherwise empty.

%I

Magic tab : empty if first active B-Channel, two blanks if second B-Channel, "* " if new connection (B-Channel not yet assigned).

%a

Day of week (e.g. "Fri")

%b

Month (e.g. "Aug")

%e

Day of month (e.g. " 8")

%T

time of day (e.g. "13:17:11")

%B

B-channel (0 or 1)

%k

Number of isdn card.

%( %/ %)

If the number of the remote side is known: this char, i.e. the (, /, or ) that comes after the %. If the number if not known, a blank is substituted.

EXAMPLE

[GLOBAL]
COUNTRYPREFIX=+
AREAPREFIX=0
COUNTRYCODE=49  # Germany
AREACODE=0721   # Karlsruhe

[VARIABLES]

[ISDNLOG]
VBN = 010
VBNLEN = 2:3
PRESELECTED = 33

LOGFILE = /var/log/isdn.log
ILABEL  = %b %e %T %ICall to tei %t from %N2 on %n2
OLABEL  = %b %e %T %Itei %t calling %N2 with %n2
REPFMTWWW       = "%X %D %17.17H %T %-17.17F %-20.20l SI: %S %9u %U %I %O"
REPFMTSHORT     = "%X%D %8.8H %T %-14.14F%U%I %O"
REPFMT  = "  %X %D %15.15H %T %-15.15F %7u %U %I %O"
CHARGEMAX       = 50.00
CURRENCY = 0.12,DEM

COUNTRYFILE = /usr/share/isdn/country.dat
RATECONF= /etc/isdn/rate.conf
RATEFILE= /usr/share/isdn/rate-de.dat
HOLIDAYS= /usr/share/isdn/holiday-de.dat
ZONEFILE= /usr/share/isdn/zone-de-%s.cdb
DESTFILE= /usr/share/isdn/dest.cdb

FILES

/etc/isdn/isdn.conf

This file.

RELATED TO isdn.conf…

isdnlog(8) callerid.conf(5) rate-files(5) isdnrep(1)

isdnformat(5) and samples/isdn.conf.*

AUTHOR

This manual page was written by Andreas Jellinghaus <[email protected]>, for Debian GNU/Linux and isdn4linux. Now maintained by Paul Slootman <[email protected]>, updated by Leopold Toetsch <[email protected]>.