sreport (1)

sreport [OPTIONS...] [COMMAND...]

sreport is used to generate reports of job usage and cluster utilization for SLURM jobs saved to the SLURM Database, slurmdbd.

-a, --all_clusters

Use all clusters instead of only the cluster from where the command was run.

-h, --help

Print a help message describing the usage of sreport.

-n, --noheader

Don't display header when listing results.

-p, --parsable

Output will be '|' delimited with a '|' at the end.

-P, --parsable2

Output will be '|' delimited without a '|' at the end.

-Q, --quiet

Print no warning or informational messages, only error messages.

-t <format>

Specify the output time format. Time format options are case insensitive and may be abbreviated. The default format is Minutes. Supported time format options are listed in the time command section below.

-v, --verbose

Print detailed event logging.

-V , --version

Print version information and exit.

lt;keywordgt; may be omitted from the execute line and sreport will

execute in interactive mode. sreport will process commands as entered until explicitly terminated.

exit

Terminate the execution of sreport. Identical to the quit command.

help

Display a description of sreport options and commands.

nonparsable

Return output to normal after parsable or parsable2 has been set.

parsable

Output will be | delimited with an ending '|'.

parsable2

Output will be | delimited without an ending '|'.

quiet

Print no warning or informational messages, only fatal error messages.

quit

Terminate the execution of sreport. Identical to the exit command.

time <time_format>

Specify the output time format. Time format options are case insensitive and may be abbreviated. The default format is Minutes. Supported time format options include:

SecPer

Seconds/Percentage of Total

MinPer

Minutes/Percentage of Total

HourPer

Hours/Percentage of Total

Seconds

Seconds

Minutes

Minutes

Hours

Hours

Percent

Percentage of Total

verbose

Enable detailed event logging.

version

Display the sreport version number.

!!

Repeat the last command executed.

Valid report types are:

cluster lt;REPORTgt; lt;OPTIONSgt;

job lt;REPORTgt; lt;OPTIONSgt;

user lt;REPORTgt; lt;OPTIONSgt;

lt;REPORTgt; options for each type include:

cluster - AccountUtilizationByUser, UserUtilizationByAccount, UserUtilizationByWckey, Utilization, WCKeyUtilizationByUser

job - SizesByAccount, SizesByAccountAndWcKey, SizesByWckey

reservation - Utilization

user - TopUsage

cluster AccountUtilizationByUser

This report will display account utilization as it appears on the hierarchical tree. Starting with the specified account or the root account by default this report will list the underlying usage with a sum on each level. Use the 'tree' option to span the tree for better visibility.

cluster UserUtilizationByAccount

This report will display users by account in order of utilization without grouping multiple accounts by user into one, but displaying them on separate lines.

cluster UserUtilizationByWCKey

This report will display users by wckey in order of utilization without grouping multiple wckey by user into one, but displaying them on separate lines.

cluster Utilization

This report will display total usage divided by Allocated, Down, Idle, and Reserved time for selected clusters. Reserved time refers to time that a job was waiting for resources after the job had become eligible. If the value is not of importance for you the number should be grouped with idle time.

cluster WCKeyUtilizationByUser

This report will display wckey utilization sorted by WCKey name for each user on each cluster.

job SizesByAccount

This report will dispay the amount of time used for job ranges specified by the 'grouping=' option. Only a single level in the tree is displayed defaulting to the root dir. If you specify other accounts with the 'account=' option sreport will use those accounts as the root account and you will receive the sub accounts for the accounts listed.

job SizesByAccountAndWckey

This report is very similar to SizesByAccount with the difference being each account is pair with wckeys so the identifier is account:wckey instead of just account so there will most likely be multiple accounts listed depending on the number of wckeys used.

job SizesByWckey

This report will dispay the amount of time for each wckey for job ranges specified by the 'grouping=' option.

reservation Utilization

This report will display total usage for reservations on the systems.

user TopUsage

Displays the top users on a cluster. Use the group option to group accounts together. The default is to have a different line for each user account combination.

Each report type has various options...

OPTIONS FOR ALL REPORT TYPES

All_Clusters

Use all monitored clusters. Default is local cluster.

Clusters=<OPT>

List of clusters to include in report. Default is local cluster.

End=<OPT>

Period ending for report. Default is 23:59:59 of previous day. Valid time formats are...

HH:MM[:SS] [AM|PM]

MMDD[YY] or MM/DD[/YY] or MM.DD[.YY]

MM/DD[/YY]-HH:MM[:SS]

YYYY-MM-DD[THH:MM[:SS]]

Format=<OPT>

Comma separated list of fields to display in report.

When using the format option for listing various fields you can put a %NUMBER afterwards to specify how many characters should be printed.

e.g. format=name%30 will print 30 characters of field name right justified. A -30 will print 30 characters left justified.

Start=<OPT>

Period start for report. Default is 00:00:00 of previous day. Valid time formats are...

HH:MM[:SS] [AM|PM]

MMDD[YY] or MM/DD[/YY] or MM.DD[.YY]

MM/DD[/YY]-HH:MM[:SS]

YYYY-MM-DD[THH:MM[:SS]]

OPTIONS SPECIFICALLY FOR CLUSTER REPORTS

Accounts=<OPT>

When used with the UserUtilizationByAccount, or AccountUtilizationByUser, List of accounts to include in report. Default is all.

Tree

When used with the AccountUtilizationByUser report will span the accounts as they are in the hierarchy.

Users=<OPT>

When used with any report other than Utilization, List of users to include in report. Default is all.

Wckeys=<OPT>

When used with the UserUtilizationByWckey or WCKeyUtilizationByUser, List of wckeys to include in report. Default is all.

OPTIONS SPECIFICALLY FOR JOB REPORTS

Accounts=<OPT>

List of accounts to use for the report Default is all. The SizesByAccount(*) report only displays 1 hierarchical level. If accounts are specified the next layer of accounts under those specified will be displayed, not the accounts specified. In the SizesByAccount(*) reports the default for accounts is root. This explanation does not apply when ran with the FlatView option.

FlatView

When used with the SizesbyAccount(*) will not group accounts in a hierarchical level, but print each account where jobs ran on a separate line without any hierarchy.

GID=<OPT>

List of group ids to include in report. Default is all.

Grouping=<OPT>

Comma separated list of size groupings. (e.g. 50,100,150 would group job cpu count 1-49, 50-99, 100-149, > 150). grouping=individual will result in a single column for each job size found.

Jobs=<OPT>

List of jobs/steps to include in report. Default is all.

Nodes=<OPT>

Only show jobs that ran on these nodes. Default is all.

Partitions=<OPT>

List of partitions jobs ran on to include in report. Default is all.

PrintJobCount

When used with the Sizes report will print number of jobs ran instead of time used.

Users=<OPT>

List of users jobs to include in report. Default is all.

Wckeys=<OPT>

List of wckeys to use for the report. Default is all. The SizesbyWckey report all users summed together. If you want only certain users specify them them with the Users= option.

OPTIONS SPECIFICALLY FOR RESERVATION REPORTS

Names=<OPT>

List of reservations to use for the report. Default is all.

Nodes=<OPT>

Only show reservations that used these nodes. Default is all.

OPTIONS SPECIFICALLY FOR USER REPORTS

Accounts=<OPT>

List of accounts to use for the report. Default is all.

Group

Group all accounts together for each user. Default is a separate entry for each user and account reference.

TopCount=<OPT>

Used in the TopUsage report. Change the number of users displayed. Default is 10.

Users=<OPT>

List of users jobs to include in report. Default is all.

FORMAT OPTIONS FOR CLUSTER REPORTS AccountUtilizationByUser:

UserUtilizationByAccount: Accounts, Cluster, CPUCount, Login, Proper, Used

UserUtilizationByWckey:

WCKeyUtilizationByUser: Cluster, CPUCount, Login, Proper, Used, Wckey

Utilization: Allocated, Cluster, CPUCount, Down, Idle, Overcommited, PlannedDown, Reported, Reserved

FORMAT OPTIONS FOR JOB REPORTS

SizesByAccount, SizesByAccountAndWckey: Account, Cluster

SizesByWckey: Wckey, Cluster

FORMAT OPTIONS FOR RESERVATION REPORTS

Utilization: Allocated, Associations, Cluster, CPUCount, CPUTime, End, Idle, Name, Nodes, Start, TotalTime

FORMAT OPTIONS FOR USER REPORTS

TopUsage: Account, Cluster, Login, Proper, Used

All commands and options are case-insensitive.

sreport job sizesbyaccount

sreport cluster utilization

sreport user top

sreport job sizesbyaccount All_Clusters users=gore1 account=environ PrintJobCount

Report number of jobs by user gore1 within the environ account

sreport cluster AccountUtilizationByUser cluster=zeus user=gore1 start=2/23/08 end=2/24/09 format=Accounts,Cluster,CPUCount,Login,Proper,Used

Report cluster account utilization with the specified fields during the specified 24 hour day of February 23, 2009, by user gore1

sreport cluster AccountUtilizationByUser cluster=zeus accounts=lc start=2/23/08 end=2/24/09

Report cluster account utilization by user in the LC account on cluster zeus

sreport user topusage start=2/16/09 end=2/23/09 -t percent account=lc

Report top usage in percent of the lc account during the specified week

Copyright (C) 2009-2010 Lawrence Livermore National Security. Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER).

Copyright (C) 2010-2013 SchedMD LLC.

This file is part of SLURM, a resource management program. For details, see <http://slurm.schedmd.com/>.

SLURM is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.

SLURM is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

sacct(1), slurmdbd(8)