DESCRIPTION

fence_apc is an I/O Fencing agent which can be used with the APC network power switch. It logs into device via telnet/ssh and reboots a specified outlet. Lengthy telnet/ssh connections should be avoided while a GFS cluster is running because the connection will block any necessary fencing actions.

fence_apc accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_apc can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.

Vendor URL: http://www.apc.com

PARAMETERS

-o, --action=<action>

Fencing Action (Default Value: reboot)

-a, --ip=<ip>

IP Address or Hostname This parameter is always required.

-l, --username=<name>

Login Name This parameter is always required.

-p, --password=<password>

Login password or passphrase

-S, --password-script=<script>

Script to retrieve password

-x, --ssh

SSH connection

-n, --plug=<id>

Physical plug number or name of virtual machine This parameter is always required.

-k, --identity-file=<filename>

Identity file for ssh

-s, --switch=<id>

Physical switch number on device

-4, --inet4-only

Forces agent to use IPv4 addresses only

-6, --inet6-only

Forces agent to use IPv6 addresses only

-u, --ipport=<port>

TCP port to use for connection with device

-v, --verbose

Verbose mode

-D, --debug-file=<debugfile>

Write debug information to given file

-V, --version

Display version information and exit

-h, --help

Display help and exit

-C, --separator=<char>

Separator for CSV created by operation list (Default Value: ,)

--power-timeout

Test X seconds for status change after ON/OFF (Default Value: 20)

--shell-timeout

Wait X seconds for cmd prompt after issuing command (Default Value: 3)

--login-timeout

Wait X seconds for cmd prompt after login (Default Value: 5)

--power-wait

Wait X seconds after issuing ON/OFF (Default Value: 0)

--delay

Wait X seconds before fencing is started (Default Value: 0)

--retry-on

Count of attempts to retry power on (Default Value: 1)

ACTIONS

on

Power on machine.

off

Power off machine.

reboot

Reboot machine.

status

This returns the status of the plug/virtual machine.

list

List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise.

monitor

Check if fencing device is running. List available plugs/virtual machines or get status of machine (if it does not support more).

metadata

The operational behavior of this is not known.

STDIN PARAMETERS

action

Fencing Action (Default Value: reboot)

ipaddr

IP Address or Hostname This parameter is always required.

login

Login Name This parameter is always required.

passwd

Login password or passphrase

passwd_script

Script to retrieve password

secure

SSH connection

port

Physical plug number or name of virtual machine This parameter is always required.

identity_file

Identity file for ssh

switch

Physical switch number on device

inet4_only

Forces agent to use IPv4 addresses only

inet6_only

Forces agent to use IPv6 addresses only

ipport

TCP port to use for connection with device

verbose

Verbose mode

debug

Write debug information to given file

version

Display version information and exit

help

Display help and exit

separator

Separator for CSV created by operation list (Default Value: ,)

power_timeout

Test X seconds for status change after ON/OFF (Default Value: 20)

shell_timeout

Wait X seconds for cmd prompt after issuing command (Default Value: 3)

login_timeout

Wait X seconds for cmd prompt after login (Default Value: 5)

power_wait

Wait X seconds after issuing ON/OFF (Default Value: 0)

delay

Wait X seconds before fencing is started (Default Value: 0)

retry_on

Count of attempts to retry power on (Default Value: 1)