Monitor low-level \*(fx server actions
/usr/sbin/faxwatch [ -g ] [ -l ] [ -h host ] trigger-expression
faxwatch registers interest in one or more events on a \*(Fx server and then prints subsequent event messages to the standard output. The faxwatch program is intended mainly for testing the event distribution mechanism used by the \*(Fx servers.
The trigger-expression is supplied as an argument to a ``\s-1SITE TRIGGER\s+1'' command passed to the hfaxd(8) The syntax for this expression is:
[<class>['<'id'>'][<mask>|'*']]*
where <class> defines a class of events and is one of:
J
for job-related events,
S
for fax send-related events,
R
for fax receive-related events, and
M
for modem-related events.
A <mask> is a 4-hex-digit mask of trigger events (see the table below). If ``*'' is specified then all events in the class are matched.
An <id> can be used to restrict matches to a specific job or modem. Eventually this will need to be generalized for job groups.
Thus an example specification that would catch any event for the modem on ttyf2 would be ``M<ttyf2>*'', and to be notified when job 1932 is requeued or completes one would use ``J<1932>4c60''.
The output from faxwatch is \s-1ASCII\s+1 text that describes each event. faxwatch runs until it is interrupted.
-g
Display times and dates in Greenwich Mean Time (\s-1GMT\s+1). NB: this is the default.
-h host
Report the status of the server on a specific host. The host may be either a symbolic name or a network address. If no -h option is supplied, faxwatch uses the FAXSERVER environment variable to identify the \*(Fx server to contact. If this variable is not set, then faxwatch checks for a setting in the configuration files (first in the per-user file and then in the system-wide file). If all of the above fails, then faxwatch attempts to contact a server on the machine where it is run.
-l
Display times and dates in the local timezone of the server.
-v
Trace the protocol exchanges between faxwatch and the hfaxd processes on the standard output.
The following table specifies the current set of events that may be monitored. This information is subject to change; consult the source code for reference.
Event Class Mask Description JOB_CREATE J 0x0001 job created JOB_SUSPEND J 0x0002 job suspended JOB_READY J 0x0004 job ready to send JOB_SLEEP J 0x0008 job sleeping awaiting time-to-send JOB_DEAD J 0x0010 job marked dead JOB_PROCESS J 0x0020 job processed by scheduler JOB_REAP J 0x0040 job corpus reaped JOB_ACTIVE J 0x0080 job activated JOB_REJECT J 0x0100 job rejected JOB_KILL J 0x0200 job killed JOB_BLOCKED J 0x0400 job blocked by other job JOB_DELAYED J 0x0800 job delayed by tod restriction or similar JOB_ALTERED\(S1 J 0x1000 job parameters altered JOB_TIMEDOUT J 0x2000 job kill timer expired JOB_PREP_BEGIN J 0x4000 job preparation started JOB_PREP_END J 0x8000 job preparation finished SEND_BEGIN S 0x0001 fax, send attempt started SEND_CALL S 0x0002 fax, call placed SEND_CONNECTED S 0x0004 fax, call answered by fax SEND_PAGE S 0x0008 fax, page transmit done SEND_DOC S 0x0010 fax, document transmit done SEND_POLLRCVD S 0x0020 fax, document retrieved by poll operation SEND_POLLDONE S 0x0040 fax, poll operation completed SEND_END S 0x0080 fax, send attempt finished SEND_REFORMAT S 0x0100 fax, job being reformatted SEND_REQUEUE S 0x0200 fax, job requeued SEND_DONE S 0x0400 fax, send job done RECV_BEGIN R 0x0001 fax, inbound call started RECV_START R 0x0002 fax, session started RECV_PAGE R 0x0004 fax, page receive done RECV_DOC R 0x0008 fax, document receive done RECV_END R 0x0010 fax, inbound call finished MODEM_ASSIGN M 0x0001 modem assigned to job MODEM_RELEASE M 0x0002 modem released by job MODEM_DOWN M 0x0004 modem marked down MODEM_READY M 0x0008 modem marked ready MODEM_BUSY M 0x0010 modem marked busy MODEM_WEDGED M 0x0020 modem considered wedged MODEM_INUSE M 0x0040 modem in use for outbound work MODEM_DATA_BEGIN M 0x0080 inbound data call begun MODEM_DATA_END M 0x0100 inbound data call finished MODEM_VOICE_BEGIN M 0x0200 inbound voice call begun MODEM_VOICE_END M 0x0400 inbound voice call finished MODEM_CID M 0x0800 inbound caller-ID information
\(S1 Event to be removed soon.