Atsc closed caption decoder
zvbi-atsc-cc [ options ] [-n] station name
zvbi-atsc-cc captures ATSC TV transmissions using a Linux DVB device and decodes the enclosed Closed Caption data. It can record both NTSC caption (EIA 608-B) and DTVCC caption (CEA 708-C).
Print a short usage message.
Suppress all progress and error messages.
Increase verbosity.
Select a different DVB device to capture the signal (/dev/dvb/adapterN). The default is adapter 0.
Select a different frontend on the DVB device (/dev/dvb/adapterN/frontendM). Most devices have only one frontend. The default is frontend 0.
Select a different demultiplexer on the DVB device (/dev/dvb/adapterN/demuxM). Most devices have only one demultiplexer. The default is demultiplexer 0.
Select a different DVR interface on the DVB device (/dev/dvb/adapterN/dvrM). Most devices have only one DVR interface. The default is DVR interface 0.
Decode an MPEG-2 Transport Stream on standard input instead of opening a DVB device. This option is mainly intended for debugging.
Since Transport Streams can contain multiple programs you must still specify one or more station names, which zvbi-atsc-cc will look up in a channel configuration file to determine the Program ID of the video elementary stream or streams it should extract. You should also add the --atsc option to clarify that this is an ATSC TS and the program should expect an azap channel configuration file, which is otherwise inferred from the DVB device capabilities.
To tune in a TV station zvbi-atsc-cc needs a channel configuration file. We use the config file of the azap tuning tool from the linuxtv-dvb-apps package. You can create it with the scan tool from the same package.
The azap channel configuration file is a text file which lists one station per line. Each line contains six fields separated by a colon: The station name, the transponder frequency in Hz, the modulation used (8VSB, 16VSB, QAM_64, QAM_256), the video stream PID, the audio stream PID, and the service ID. Empty lines and lines starting with a number sign will be ignored.
This option selects a different channel configuration file. The default is
$HOME/.azap/channels.conf
List all stations in the channel configuration file and their transponder frequency.
The station to tune in. Usually the -n can be omitted.
zvbi-atsc-cc can record caption from multiple stations at once if they share a transponder frequency. Just specify multiple station names on the command line to enable this.
With the caption and XDS options you specify which data zvbi-atsc-cc should extract. If multiple station names are given these options apply to the succeeding station name. You must specify at least one of these options for each station.
Print any received caption on standard output.
Append any received caption to the specified file.
Print NTSC Closed Caption channel 1, 2, 3 or 4 on standard output.
Filter out NTSC Closed Caption channel CC1 ... CC4 and append the text to the specified file. CC1 is the primary, CC3 the secondary caption service. If both services are transmitted CC1 usually carries English, CC3 Spanish caption.
Filter out NTSC Text service T1 ... T4 and append the text to the specified file.
Filter out DTVCC service 1 or 2 and append the text to the specified file. Service 1 is the primary, service 2 the secondary caption service. If both services are transmitted service 1 usually carries English, service 2 Spanish caption.
Digital TV stations are supposed to transmit language codes and other information about the available caption services but these are not presently evaluated. zvbi-atsc-cc filters out text which does not appear to be caption, such as tickers or vertically printed text.
Do not print WebTV links.
Prepend timestamps (YYYYMMDDHHMMSS) to caption lines.
Print caption one sentence at a time.
When type is "plain" zvbi-atsc-cc prints caption and XDS text without any markup. When type is "vt100" it faithfully reproduces the caption foreground and background color, italic and underline attributes by inserting VT.100 terminal control codes. With type "ntsc-cc" it mimics the output of the ntsc-cc and zvbi-ntsc-cc tool. The default is "ntsc-cc".
zvbi-atsc-cc supports all Closed Caption character sets and converts to the encoding of the current locale, usually UTF-8.
Same as -j plain
Print all received XDS data on standard output.
Filter out eXtended Data Service data (station name, program name, program rating etc.) and append it as text to the specified file.
Filter out specific XDS information: all, call (station call sign), desc (program synopsis), length, network, rating, time, timecode, timezone, title. Multiple -f options accumulate. The default is "all".
zvbi-atsc-cc -c NJN-HD zvbi-atsc-cc --cc1-file wnyw.txt WNYW-DT --cc1-file wwor.txt WWOR-DT (NJN-HD, WNYW-DT and WWOR-DT are TV stations in New York. WNYW-DT and WWOR-DT can be captured simultaneously because they share a transponder frequency.)
$HOME/.azap/channels.conf
zvbi-ntsc-cc, azap
http://zapping.sourceforge.net
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.