Remote x-server frontend for vdr-plugin-xineliboutput
vdr-sxfe [options] [xvdr[+udp|+tcp|+rtp]:[//host[:port]]]
vdr-sxfe is a X/Xv/XvMc remote frontend, that plays back streams provided by vdr-plugin-xineliboutput.
--help Show (this) help message
--audio=audiodriver[:device] Select audio driver and optional port
--video=videodriver[:device] Select video driver and optional port As far as supported, possible video drivers might be: xshm, xv, xvmc, xxmc, vidix, XDirectFB, opengl, sdl or none
--display=displayaddress X11 display address
--wid=id Use existing X11 window
--aspect=[auto|4:3|16:9|16:10|default] Display aspect ratio (You can us a script to control the HW aspect ratio: --aspect=auto:path_to_script)
--fullscreen Fullscreen mode
--hud Head Up Display OSD mode
--width=x Video window width
--height=x Video window height
--noscaling Disable all video scaling
--post=name[:arg=val[,arg=val]] Load and use xine post plugins, e.g.:
--post=upmix
--post=upmix;tvtime:enabled=1,cheap_mode=1)
--lirc[=devicename] Use lirc input device Optional lirc socket name can be given
--verbose Verbose debug output
--silent Silent mode (report only errors)
--syslog Write all output to system log
--nokbd Disable keyboard input
--daemon Run as daemon (disable keyboard, log to syslog and fork to background)
--slave Enable slave mode (read commands from stdin)
--reconnect Automatically reconnect when connection has been lost
--tcp, --udp, --rtp Use TCP, UDP or RTP transport If no transport options are given, transports are tried in following order: local pipe, rtp, udp, tcp
Search for VDR (xineliboutput) server, connect to it and negotiate best available transport, use best available audio:
vdr-sxfe
Connect to 192.168.1.3 default port and negoate best available transport:
vdr-sxfe xvdr://192.168.1.3
Connect to 192.168.2.100, port 12550 and use TCP transport:
vdr-sxfe xvdr+tcp://192.168.2.100:12550
Automatically search for VDR server and use UDP transport:
vdr-sxfe xvdr+udp: vdr-syfe --udp
Use alsa:
vdr-sxfe --audio alsa
Use alsa (and specific card/sub-device):
vdr-sxfe --audio alsa:plughw:1,1
Video driver (and display / device):
vdr-sxfe --video xv vdr-sxfe --video xvmc:127.0.0.1:1.0
If deinterlacing post plugin options are not given at command line, deinterlacing is controlled by VDR plugin configuration menu settings.
De-interlacing can also be forced on or off with command-line option "--post tvtime". Examples:
vdr-sxfe --post tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1 vdr-sxfe --post tvtime:enable=0
This manual page was written by Tobias Grimm <[email protected]>