sumo-gui: A microscopic road traffic simulation

DESCRIPTION

SUMO sumo Version 0.21.0

A microscopic road traffic simulation.

Configuration Options:

-c, --configuration-file FILE: Loads the named config on startup
--save-configuration FILE: Saves current configuration into FILE
--save-template FILE: Saves a configuration template (empty) into FILE
--save-schema FILE: Saves the configuration schema into FILE
--save-commented: Adds comments to saved template, configuration, or schema

Input Options:

-n, --net-file FILE: Load road network description from FILE
-r, --route-files FILE: Load routes descriptions from FILE(s)
-a, --additional-files FILE: Load further descriptions from FILE(s)
-w, --weight-files FILE: Load edge/lane weights for online rerouting from FILE
-x, --weight-attribute STR: Name of the xml attribute which gives the edge weight
--load-state FILE: Loads a network state from FILE
--load-state.offset TIME: Sets the time offset for vehicle segment exit times

Output Options:

--netstate-dump FILE: Save complete network states into FILE
--netstate-dump.empty-edges: Write also empty edges completely when dumping
--emission-output FILE: Save the emission values of each vehicle
--fcd-output FILE: Save the Floating Car Data
--fcd-output.geo: Save the Floating Car Data using geo-coordinates (lon/lat)
--fcd-output.signals: Add the vehicle signal state to the FCD output (brake lights etc.)
--full-output FILE: Save a lot of information for each timestep (very redundant)
--queue-output FILE: Save the vehicle queues at the junctions (experimental)
--vtk-output FILE: Save complete vehicle positions inclusive speed values in the VTK Format (usage: \,/path/out\/ will produce /path/out_$TIMESTEP$.vtp files)
--amitran-output FILE: Save the vehicle trajectories in the Amitran format
--summary-output FILE: Save aggregated vehicle departure info into FILE
--tripinfo-output FILE: Save single vehicle trip info into FILE
--vehroute-output FILE: Save single vehicle route info into FILE
--vehroute-output.exit-times: Write the exit times for all edges
--vehroute-output.last-route: Write the last route only
--vehroute-output.sorted: Sorts the output by departure time
--vehroute-output.write-unfinished: Write vehroute output for vehicles which have not arrived at simulation end
--link-output FILE: Save links states into FILE
--bt-output FILE: Save bt visibilities into FILE
--save-state.times INT[]: Use INT[] as times at which a network state written
--save-state.prefix FILE: Prefix for network states
--save-state.files FILE: Files for network states

Time Options:

-b, --begin TIME: Defines the begin time; The simulation starts at this time
-e, --end TIME: Defines the end time; The simulation ends at this time
--step-length TIME: Defines the step duration

Processing Options:

-s, --route-steps TIME: Load routes for the next number of seconds ahead
--no-internal-links: Disable (junction) internal links
--ignore-junction-blocker TIME: Ignore vehicles which block the junction after they have been standing for SECONDS (-1 means never ignore)
--ignore-accidents: Do not check whether accidents occure more deeply
--ignore-route-errors: Do not check whether routes are connected
--max-num-vehicles INT: Quit simulation if this number of vehicles is exceeded
--scale FLOAT: Scale demand by the given factor (0..1)
--time-to-teleport TIME: Specify how long a vehicle may wait until being teleported, defaults to 300, non-positive values disable teleporting
--time-to-teleport.highways TIME: The teleport time on highways
--max-depart-delay TIME: How long vehicles wait for departure before being skipped, defaults to -1 which means vehicles are never skipped
--sloppy-insert: Whether insertion on an edge shall not be repeated in same step once failed
--eager-insert: Whether each vehicle is checked separately for insertion on an edge
--random-depart-offset TIME: Each vehicle receives a random offset to its depart value drawn uniformly from [0, TIME]
--lanechange.allow-swap: Whether blocking vehicles trying to change lanes may be swapped
--lanechange.duration TIME: Duration of a lane change maneuver (default 0)
--lanechange.overtake-right: Whether overtaking on the right on motorways is permitted
--routing-algorithm STR: Select among routing algorithms ['dijkstra', 'astar']
--pedestrian.model STR: Select among pedestrian models ['nonInteracting', 'striping']
--pedestrian.striping.stripe-width FLOAT: Width of parallel stripes for segmenting a sidewalk (meters) for use with model 'striping'
--pedestrian.striping.dawdling FLOAT: factor for random slow-downs [0,1] for use with model 'striping'

Report Options:

-v, --verbose: Switches to verbose output
--print-options: Prints option values before processing
-?, --help: Prints this screen
-V, --version: Prints the current version
-X, --xml-validation STR: Set schema validation scheme of XML inputs ("never", "auto" or "always")
--xml-validation.net STR: Set schema validation scheme of SUMO network inputs ("never", "auto" or "always")
-W, --no-warnings: Disables output of warnings
-l, --log FILE: Writes all messages to FILE (implies verbose)
--message-log FILE: Writes all non-error messages to FILE (implies verbose)
--error-log FILE: Writes all warnings and errors to FILE
--no-duration-log: Disable performance reports for individual simulation steps
--no-step-log: Disable console output of current simulation step

Emissions Options:

--phemlight-path FILE: Determines where to load PHEMlight definitions from.
--device.emissions.probability FLOAT: The probability for a vehicle to have a 'emissions' device
--device.emissions.explicit STR: Assign a 'emissions' device to named vehicles
--device.emissions.deterministic: The 'emissions' devices are set deterministic using a fraction of 1000

Communication Options:

--device.btreceiver.probability FLOAT: The probability for a vehicle to have a 'btreceiver' device
--device.btreceiver.explicit STR: Assign a 'btreceiver' device to named vehicles
--device.btreceiver.deterministic: The 'btreceiver' devices are set deterministic using a fraction of 1000
--device.btreceiver.range FLOAT: The range of the bt receiver
--device.btreceiver.all-recognitions: Whether all recognition point shall be written
--device.btsender.probability FLOAT: The probability for a vehicle to have a 'btsender' device
--device.btsender.explicit STR: Assign a 'btsender' device to named vehicles
--device.btsender.deterministic: The 'btsender' devices are set deterministic using a fraction of 1000

Routing Options:

--device.rerouting.probability FLOAT: The probability for a vehicle to have a 'rerouting' device
--device.rerouting.explicit STR: Assign a 'rerouting' device to named vehicles
--device.rerouting.deterministic: The 'rerouting' devices are set deterministic using a fraction of 1000
--device.rerouting.period TIME: The period with which the vehicle shall be rerouted
--device.rerouting.pre-period TIME: The rerouting period before depart
--device.rerouting.adaptation-weight FLOAT: The weight of prior edge weights
--device.rerouting.adaptation-interval TIME: The interval for updating the edge weights
--device.rerouting.with-taz: Use zones (districts) as routing end points
--device.rerouting.init-with-loaded-weights: Use given weight files for initializing edge weights

Example Device Options:

--device.example.explicit STR: Assign a device to named vehicles
--device.example.parameter FLOAT: An exemplary parameter which can be used by all instances of the example device

TraCI Server Options:

--remote-port INT: Enables TraCI Server if set

Random Number Options:

--random: Initialises the random number generator with the current system time
--seed INT: Initialises the random number generator with the given value

GUI Only Options:

--gui-settings-file FILE: Load visualisation settings from FILE
-Q, --quit-on-end: Quits the GUI when the simulation stops
-G, --game: Start the GUI in gaming mode
-S, --start: Start the simulation after loading
-T, --disable-textures: Do not load background pictures

sumo-gui (1)

SYNOPSIS

DESCRIPTION

Configuration Options:

Input Options:

Output Options:

Time Options:

Processing Options:

Report Options:

Emissions Options:

Communication Options:

Routing Options:

Example Device Options:

TraCI Server Options:

Random Number Options:

GUI Only Options:

EXAMPLES

REPORTING BUGS