mpegdemux (1)

mpegdemux [options] [input [output]]

mpegdemux(1) is an MPEG1/MPEG2 system stream demultiplexer. It can be used to list the contents of an MPEG system stream and to extract elementary streams.

mpegdemux(1) has four primary modes of operation:

scan

In this mode the MPEG system stream is scanned for elementary streams.

list

In this mode the contents of an MPEG system stream are listed in a textual form. This is useful to get an overview of what's in an MPEG file

demux

In this mode elementary streams are extracted from an MPEG system stream. The system stream packet structure is dissolved in the process. Typically each extracted stream is written to its own file.

remux

This is like demux, except that the MPEG system stream structure is left intact. This means that the output is again an MPEG system stream with all but the selected elementary streams removed.

-a, --ac3

AC3 sound packets in DVD MPEG2 streams have a 3 byte header that is neither part of the MPEG specification nor of the AC3 specification. When this option is used, these 3 bytes are removed to produce a correct AC3 stream. Note that this option applies to all selected substreams without checking whether they actually contain an AC3 elementary stream.

-b, --base-name name

When demultiplexing more than one stream, the output file names can be set using this option. To generate the output file name for a stream, every # character in name is replaced by a hex digit of the stream id. For example, to extract all video streams in one go, use something like

$ mpegdemux -d -b video_##.m1v -s 0xc0-0xcf src.mpg

to get files video_c0.m1v, video_c1.m1v, ...

-c --scan

Scan a system stream for elementary streams. This is the default mode. All streams and substreams are automatically selected when using this option.

-d, --demux

Demultiplex an MPEG system stream. The demultiplexed streams are written to the output file unless the --base-name option is used. If the --base-name option is not used, only one stream can be demultiplexed (if more streams are specified, they will be randomly interleaved in the output file).

-D, --no-drop

Don't drop incomplete packets in demuxing and remuxing mode.

-e, --no-end

Don't print end codes in listing mode. Additionally, in remuxing mode, make sure that there is exactly one end code at the end of the stream.

-E, --empty-packs

When streams are removed during remuxing, packs can become empty. Including these empty packs in the output is pointless and therefore is not done by default. Use this option to force inclusion of all packs.

-F, --first-pts

In scan mode, in addition to each stream's first packet, also list the packet with the lowest presentation time stamp.

-h, --no-system-headers

Don't print system headers in listing mode. Additionally, in remuxing mode, don't repeat system headers.

-i, --invalid spec

Select invalid streams. Packets of invalid streams are not recognized as packets and their contents are parsed as MPEG system stream data rather than being skipped. This is useful for broken/incomplete streams. The syntax for spec is the same as for -s. Additionally, if spec is "-" then all streams that have not yet been selected by -s are made invalid.

-k, --no-packs

Don't print packs in listing mode.

-K, --remux-skipped

Copy bytes that are skipped while looking for a start code.

-l, --list

List the system headers, packs and packets in an MPEG system stream.

-m, --packet-max-size size

Set the maximum packet size to size. Packets in the input stream that are larger are considered invalid. As with the -i option, the packet is not simply skipped but parsed as MPEG system stream data.

-p, --substream spec

This option selects private substreams. Whenever Private Stream 1 (0xbd) is selected using -s, the substreams within that private stream can be selected using -p. The syntax for spec is the same as for -s.

-P, --substream-map id1 id2

Remap substream id1 to id2 when remuxing.

-r, --remux

Remultiplex an MPEG system stream. The output MPEG system stream is written to the output file. Many options control what is copied from the input to the output and what is discarded.

-s, --streams spec

This option selects streams. spec specifies the stream IDs in the following form:

[+|-]<id>[-<id>]{/[+|-]<id>[-<id>]}

where id is either a numeric stream ID or one of all or none. A "-" in front of an ID range means exclusion. For example the spec

-s 0xc0-0xcf/-0xc2

selects all video streams (0xc0 - 0xcf) except stream 0xc2.

-S, --stream-map id1 id2

Remap stream id1 to id2 when remuxing.

-t, --no-packets

Don't print packets in listing mode.

-u, --spu

This option is used to extract DVD subtitles. It is necessary because the subtitle streams on DVD don't contain all the timing information (the time stamps in the packet headers are required). If this option is used during demultiplexing, the output files for all substreams are written in the following format:

"SPU " (4 bytes)

PTS (8 bytes, MSB first)

SPU packet

PTS (8 bytes)

SPU packet

and so on

-x, --split

Split the remuxed stream at sequence boundaries. This option is only meaningful in remuxing mode. It can not be used together with the -e option. The individual sequences are written to files whose name was set with the -b option.

--help

Print usage information

--version

Print version information

Scan a system stream for elementary streams:

$ mpegdemux -c -v src.mpg

List the contents of an MPEG system stream:

$ mpegdemux -l -k -s all -p all src.mpg

Extract the first video stream:

$ mpegdemux -d -s 0xe0 src.mpg dst.m1v

Extract all audio streams:

$ mpegdemux -d -s 0xc0-0xdf -b audio_##.mpa src.mpg

Remove the second video stream:

$ mpegdemux -r -s all/-0xc1 -p all src.mpg dst.mpg

Extract the first AC3 audio stream from a DVD MPEG2 system stream:

$ mpegdemux -d -s 0xbd -p 0x80 --ac3 src.mpg dst.ac3

Exchange the first and the second audio stream:

$ mpegdemux -r -s all -p all -S 0xc0 0xc1 -S 0xc1 0xc0 src.mpg dst.mpg

mplex(1)

Hampa Hug <[email protected]>