Generate and query the luaotfload font names database
luaotfload-tool [ -bcDfFiIlLnpqRSuvVhw ]
luaotfload-tool --update [ --force ] [ --quiet ] [ --verbose ]
[ --prefer-texmf ] [ --dry-run ] [ --formats=[+|-]EXTENSIONS ] [ --no-compress ] [ --no-strip ] [ --local ] [ --max-fonts=N ]
luaotfload-tool --find=FONTNAME [ --fuzzy ] [ --info ] [ --inspect ]
[ --no-reload ]
luaotfload-tool --flush-lookups
luaotfload-tool --cache=DIRECTIVE
luaotfload-tool --list=CRITERION[:VALUE] [ --fields=F1,F2,...,Fn ]
luaotfload-tool --bisect=DIRECTIVE
luaotfload-tool --help
luaotfload-tool --version
luaotfload-tool --show-blacklist
luaotfload-tool --diagnose=CHECK
luaotfload-tool accesses the font names database that is required by the Luaotfload package. There are two general modes: update and query.
update: update the database or rebuild it entirely;
query: resolve a font name or display close matches.
--update, -u
Update the database; indexes new fonts.
--force, -f
Force rebuilding of the database; re-indexes all fonts.
--local, -L
Include font files in $PWD. This option will cause large parts of the database to be rebuilt. Thus it is quite inefficient. Additionally, if local font files are found, the database is prevented from being saved to disk, so the local fonts need to be parsed with every invocation of luaotfload-tool.
--no-reload, -n
Suppress auto-updates to the database (e.g. when --find is passed an unknown name).
--no-compress, -c
Do not filter the plain text version of the font index through gzip. Useful for debugging if your editor is built without zlib.
--prefer-texmf, -p
Organize the file name database in a way so that it prefer fonts in the TEXMF tree over system fonts if they are installed in both.
--formats=EXTENSIONS
Extensions of the font files to index. Where EXTENSIONS is a comma-separated list of supported file extensions (otf, ttf, ttc, dfont, pfa, and pfb). If the list is prefixed with a + sign, the given list is added to the currently active one; - subtracts. Default: otf,ttf,ttc,dfont. Examples:
--formats=-ttc,ttf would skip TrueType fonts and font collections;
--formats=otf would scan only OpenType files;
--formats=+pfb includes binary Postscript files. Warning: with a standard TeX Live installation this will grow the database considerably and slow down font indexing.
--find=NAME
Resolve a font name; this looks up <name> in the database and prints the file name it is mapped to. --find also understands request syntax, i.e. --find=file:foo.otf checks whether foo.otf is indexed.
--fuzzy, -F
Show approximate matches to the file name if the lookup was unsuccessful (requires --find).
--info, -i
Display basic information to a resolved font file (requires --find).
--inspect, -I
Display detailed information by loading the font and analyzing the font table; very slow! For the meaning of the returned fields see the LuaTeX documentation. (requires --find).
--warnings, -w
Print the warnings generated by the fontloader library (assumes -I). Automatically enabled if the verbosity level exceeds 2.
--list=CRITERION
Show entries, where CRITERION is one of the following:
the character *, selecting all entries;
a field of a database entry, for instance version or format*, according to which the output will be sorted. Information in an unstripped database (see the option --no-strip above) is nested: Subfields of a record can be addressed using the -> separator, e. g. file->location, style->units_per_em, or names->sanitized->english->prefmodifiers. NB: shell syntax requires that arguments containing -> be properly quoted!
an expression of the form field:value to limit the output to entries whose field matches value.
For example, in order to output file names and corresponding versions, sorted by the font format:
./luaotfload-tool.lua --list="format" --fields="file->base,version"
This prints:
otf latinmodern-math.otf Version 1.958 otf lmromancaps10-oblique.otf 2.004 otf lmmono8-regular.otf 2.004 otf lmmonoproplt10-bold.otf 2.004 otf lmsans10-oblique.otf 2.004 otf lmromanslant8-regular.otf 2.004 otf lmroman12-italic.otf 2.004 otf lmsansdemicond10-oblique.otf 2.004 ...
--fields=FIELDS
Comma-separated list of fields that should be printed. Information in an unstripped database (see the option --no-strip above) is nested: Subfields of a record can be addressed using the -> separator, e. g. file->location, style->units_per_em, or names->sanitized->english->subfamily. The default is plainname,version*. (Only meaningful with --list.)
--flush-lookups
Clear font name lookup cache (experimental).
--cache=DIRECTIVE
Cache control, where DIRECTIVE is one of the following:
purge -> delete Lua files from cache;
erase -> delete Lua and Luc files from cache;
show -> print stats.
--show-blacklist, -b
Show blacklisted files (not directories).
--dry-run, -D
Don’t load fonts when updating the database; scan directories only. (For debugging file system related issues.)
--no-strip
Do not strip redundant information after building the database. Warning: this will inflate the index to about two to three times the normal size.
--max-fonts=N
Process at most N font files, including fonts already indexed in the count.
--bisect=DIRECTIVE
Bisection of the font database. This mode is intended as assistance in debugging the Luatex engine, especially when tracking memleaks or buggy fonts.
DIRECTIVE can be one of the following:
run -> Make luaotfload-tool respect the bisection progress when running. Combined with --update and possibly --force this will only process the files from the start up until the pivot and ignore the rest.
start -> Start bisection: create a bisection state file and initialize the low, high, and pivot indices.
stop -> Terminate the current bisection session by deleting the state file.
good | bad -> Mark the section processed last as “good” or “bad”, respectively. The next bisection step will continue with the bad section.
status -> Print status information about the current bisection session. Hint: Use with higher verbosity settings for more output.
A bisection session is initiated by issuing the start directive. This sets the pivot to the middle of the list of available font files. Now run luaotfload-tool with the --update flag set as well as --bisect=run: only the fonts up to the pivot will be considered. If that task exhibited the issue you are tracking, then tell Luaotfload using --bisect=bad. The next step of --bisect=run will continue bisection with the part of the files below the pivot. Likewise, issue --bisect=good in order to continue with the fonts above the pivot, assuming the tested part of the list did not trigger the bug.
Once the culprit font is tracked down, good or bad will have no effect anymore. run will always end up processing the single font file that was left. Use --bisect=stop to clear the bisection state.
--verbose=N,-v
Set verbosity level to n or the number of repetitions of -v.
--quiet
No verbose output (log level set to zero).
--log=CHANNEL
Redirect log output (for database troubleshooting), where CHANNEL can be
stdout -> all output will be dumped to the terminal (default); or
file -> write to a file to the temporary directory (the name will be chosen automatically.
--version, -V
Show version numbers of components as well as some basic information and exit.
--help, -h
Show help message and exit.
--diagnose=CHECK
Run the diagnostic procedure CHECK. Available procedures are:
files -> check Luaotfload files for modifications;
permissions -> check permissions of cache directories and files;
environment -> print relevant
environment and kpse variables;
repository -> check the git repository for new releases,
index -> check database, display information about it.
Procedures can be chained by concatenating with commas, e.g. --diagnose=files,permissions. Specify thorough to run all checks.
The font name database is usually located in the directory texmf-var/luatex-cache/generic/names/ ($TEXMFCACHE as set in texmf.cnf) of your TeX Live distribution as a zlib-compressed file luaotfload-names.lua.gz. The experimental lookup cache will be created as luaotfload-lookup-cache.lua in the same directory. These Lua tables are not used directly by Luaotfload, though. Instead, they are compiled to Lua bytecode which is written to corresponding files with the extension .luc in the same directory. When modifying the files by hand keep in mind that only if the bytecode files are missing will Luaotfload use the plain version instead. Both kinds of files are safe to delete, at the cost of regenerating them with the next run of LuaTeX.
luatex (1), lua (1)
texdoc luaotfload to display the manual for the Luaotfload package
Luaotfload development https://github.com/lualatex/luaotfload
LuaLaTeX mailing list http://tug.org/pipermail/lualatex-dev/
LuaTeX http://luatex.org/
ConTeXt http://wiki.contextgarden.net
Luaotfload on CTAN http://ctan.org/pkg/luaotfload
Tons, probably.
Luaotfload is maintained by the LuaLaTeX dev team (https://github.com/lualatex/). The fontloader code is provided by Hans Hagen of Pragma ADE, Hasselt NL (http://pragma-ade.com/).
This manual page was written by Philipp Gesang <[email protected]>.
GPL v2.0