Create ccmx or ccss.
Create CCMX or CCSS
ccmxmake [-options]output.ccmx
-v
Verbose mode
-S
Create CCSS rather than CCMX -f file1.ti3[,file2.ti3] Create from one or two .ti3 files rather than measure.
-display displayname
Choose X11 display name
-d n[,m]
Choose the display n from the following list (default 1) Optionally choose different display m for VideoLUT access
1 name = ':0.0' 1 = 'Screen 1, Output DVI-I-1 at 0, 0, width 1920, height 1080'
-dweb[:port]
Display via a web server at port (default 8080)
-p
Use telephoto mode (ie. for a projector) (if available)
-P ho,vo,ss[,vs]
Position test window and scale it ho,vi: 0.0 = left/top, 0.5 = center, 1.0 = right/bottom etc. ss: 0.5 = half, 1.0 = normal, 2.0 = double etc.
-F
Fill whole screen with black background
-n
Don't set override redirect on test window
-N
Disable initial calibration of instrument if possible
-H
Use high resolution spectrum mode (if available)
-C "command"
Invoke shell "command" each time a color is set
-o observ
Choose CIE Observer for CCMX spectrometer data: 1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2
-s steps
Override default patch sequence combination steps (default 1)
-W n|h|x
Override serial port flow control: n = none, h = HW, x = Xon/Xoff
-D [level]
Print debug diagnostics to stderr
-E desciption
Override the default overall description
-I displayname
Set display make and model description
-T displaytech
Set display technology description (ie. CRT, LCD etc.)
-U c
Set UI selection character(s)
-Y r|n
Set or override refresh/non-refresh display type
-Y R:rate
Override measured refresh rate with rate Hz
-Y A
Use non-adaptive integration time mode (if available).
correction.ccmx | calibration.ccss
File to save result to