/dev/ttyU*
for callin ports
uvscom4
Usb support for suntac slipper u vs-10u serial adapters driver
Usage
To compile this driver into the kernel, place the following lines in your kernel configuration file:
device usb device ucom device uvscom
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
uvscom_load="YES"
Hardware
The uvscom driver supports the following adapters:
-
DDI Pocket Air H" C@rd
-
DDI Pocket Air H" C@rd 64
-
NTT P-in
-
NTT P-in m@ster
Overview
The uvscom driver provides support for the SUNTAC Slipper U VS-10U chip. Slipper U is a PC Card to USB converter for data communication card adapters.
The device is accessed through the ucom(4) driver which makes it behave like a tty(4).
Files
-
-
/dev/ttyU*.init -
/dev/ttyU*.lock -
corresponding callin initial-state and lock-state devices
-
/dev/cuaU* -
for callout ports
-
/dev/cuaU*.init -
/dev/cuaU*.lock -
corresponding callout initial-state and lock-state devices
Releases
61 releases since FreeBSD 4.7-RELEASE; the text changed 37 times.