qmicli1

Control qmi devices

Overview

Usage:

: qmicli [OPTION???] - Control QMI devices

Help Options:

-h, --help: Show help options

--help-all: Show all help options

--help-dms: Show Device Management Service options

--help-nas: Show Network Access Service options

--help-wds: Show Wireless Data Service options

--help-pbm: Show Phonebook Management options

--help-pdc: Show platform device configurations options

--help-uim: Show User Identity Module options

--help-sar: Show Specific Absorption Rate options

--help-wms: Show Wireless Messaging Service options

--help-wda: Show Wireless Data Administrative options

--help-voice: Show Voice Service options

--help-loc: Show location options

--help-qos: Show Quality of Service options

--help-gas: Show General Application Service options

--help-gms: Show General Modem Service options

--help-dsd: Show Data System Determination options

--help-dpm: Show Data Port Mapper Service options

--help-fox: Show Foxconn Modem Service options

--help-atr: Show AT Relay Service options

--help-imsp: Show IP Multimedia Subsystem Presence Service options

--help-imsa: Show IP Multimedia Subsystem Application Service options

--help-ims: Show IP Multimedia Subsystem Settings Service options

--help-link-management: Show link management specific options

--help-qmiwwan: Show qmi_wwan driver specific options

DMS options:

--dms-get-ids: Get IDs

--dms-get-capabilities: Get capabilities

--dms-get-manufacturer: Get manufacturer

--dms-get-model: Get model

--dms-get-revision: Get revision

--dms-get-msisdn: Get MSISDN

--dms-get-power-state: Get power state

`--dms-uim-set-pin-protection=[(PIN\|PIN2),(disable\|enable),(current PIN)]`	Set PIN protection in the UIM
`--dms-uim-verify-pin=[(PIN\|PIN2),(current PIN)]`	Verify PIN
`--dms-uim-unblock-pin=[(PIN\|PIN2),(PUK),(new PIN)]`	Unblock PIN
`--dms-uim-change-pin=[(PIN\|PIN2),(old PIN),(new PIN)]`	Change PIN

--dms-uim-get-pin-status: Get PIN status

--dms-uim-get-iccid: Get ICCID

--dms-uim-get-imsi: Get IMSI

--dms-uim-get-state: Get UIM State

--dms-uim-get-ck-status=[(pn|pu|pp|pc|pf)]: Get CK Status

--dms-uim-set-ck-protection=[(pn|pu|pp|pc|pf),(disable),(key)]: Disable CK protection

--dms-uim-unblock-ck=[(pn|pu|pp|pc|pf),(key)]: Unblock CK

--dms-get-hardware-revision: Get the HW revision

--dms-get-operating-mode: Get the device operating mode

--dms-set-operating-mode=[(Operating mode)]: Set the device operating mode

--dms-get-time: Get the device time

--dms-get-prl-version: Get the PRL version

--dms-get-activation-state: Get the state of the service activation

--dms-activate-automatic=[Activation Code]: Request automatic service activation

--dms-activate-manual=[SPC,SID,MDN,MIN]: Request manual service activation

--dms-get-user-lock-state: Get the state of the user lock

`--dms-set-user-lock-state=[(disable\|enable),(current lock code)]`	Set the state of the user lock
`--dms-set-user-lock-code=[(old lock code),(new lock code)]`	Change the user lock code

--dms-read-user-data: Read user data

--dms-write-user-data=[(User data)]: Write user data

--dms-read-eri-file: Read ERI file

`--dms-restore-factory-defaults=[(Service Programming Code)]`	Restore factory defaults
`--dms-validate-service-programming-code=[(Service Programming Code)]`	Validate the Service Programming Code

--dms-set-firmware-id: Set firmware id

--dms-get-band-capabilities: Get band capabilities

--dms-get-factory-sku: Get factory stock keeping unit

--dms-list-stored-images: List stored images

`--dms-select-stored-image=[modem#,pri#] where # is the index`	Select stored image
`--dms-delete-stored-image=[modem#\|pri#] where # is the index`	Delete stored image

--dms-get-firmware-preference: Get firmware preference

--dms-set-firmware-preference=["key=value,..."]: Set firmware preference (required keys: firmware-version, config-version, carrier; optional keys: modem-storage-index, override-download=yes)

--dms-get-boot-image-download-mode: Get boot image download mode

--dms-set-boot-image-download-mode=[normal|boot-and-recovery]: Set boot image download mode

--dms-get-software-version: Get software version

--dms-set-fcc-authentication: Set FCC authentication

--dms-get-supported-messages: Get supported messages

--dms-hp-change-device-mode=[fastboot]: Change device mode (HP specific)

--dms-swi-get-current-firmware: Get Current Firmware (Sierra Wireless specific)

--dms-swi-get-usb-composition: Get current and supported USB compositions (Sierra Wireless specific)

--dms-swi-set-usb-composition=[#]: Set USB composition (Sierra Wireless specific)

--dms-foxconn-change-device-mode=[fastboot-ota|fastboot-online]: Change device mode (Foxconn specific)

--dms-foxconn-get-firmware-version=[firmware-mcfg-apps|firmware-mcfg|apps]: Get firmware version (Foxconn specific)

--dms-foxconn-set-fcc-authentication=[magic]: Set FCC authentication (Foxconn specific)

--dms-foxconn-set-fcc-authentication-v2=[magic-string,magic-number]: Set FCC authentication (Foxconn specific, v2)

--dms-get-mac-address=[wlan|bt]: Get default MAC address

--dms-reset: Reset the service state

--dms-noop: Just allocate or release a DMS client. Use with `--client-no-release-cid' and/or `--client-cid'

NAS options:

--nas-get-signal-strength: Get signal strength

--nas-get-signal-info: Get signal info

--nas-get-tx-rx-info=[(Radio Interface)]: Get TX/RX info

--nas-get-home-network: Get home network

--nas-get-serving-system: Get serving system

--nas-get-system-info: Get system info

--nas-get-technology-preference: Get technology preference

--nas-get-preferred-networks: Get preferred networks

--nas-set-preferred-networks=[[MCCMNC,access_tech],...]: Set preferred networks list

--nas-get-system-selection-preference: Get system selection preference

--nas-set-system-selection-preference=[cdma-1x|cdma-1xevdo|gsm|umts|lte|td-scdma][,[automatic|manual=MCCMNC]]: Set system selection preference

--nas-network-scan=[gsm|umts|lte|td-scdma|5gnr]: Scan all networks (no argument) or scan one specific network type

--nas-incremental-network-scan=[gsm|umts|lte|td-scdma|5gnr]: Incrementally scan all networks (no argument) or scan one specific network type

--nas-get-cell-location-info: Get Cell Location Info

--nas-force-network-search: Force network search

--nas-get-operator-name: Get operator name data

--nas-get-plmn-name=[mccmnc]: Get plmn name data

--nas-get-lte-cphy-ca-info: Get LTE Cphy CA Info

--nas-get-rf-band-info: Get RF Band Info

--nas-get-network-time: Get Network Time

--nas-get-drx: Get DRX

--nas-get-endc-config: Get EN-DC Config

--nas-get-supported-messages: Get supported messages

--nas-swi-get-status: Get status ((Sierra Wireless specific)

--nas-reset: Reset the service state

--nas-noop: Just allocate or release a NAS client. Use with `--client-no-release-cid' and/or `--client-cid'

WDS options:

--wds-start-network=["key=value,..."]: Start network (allowed keys: apn, 3gpp-profile, 3gpp2-profile, auth (PAP|CHAP|BOTH), username, password, autoconnect=yes, ip-type (4|6))

--wds-follow-network: Follow the network status until disconnected. Use with `--wds-start-network'

--wds-stop-network=[Packet data handle] OR [disable-autoconnect]: Stop network

--wds-get-current-settings: Get current settings

--wds-get-packet-service-status: Get packet service status

--wds-get-packet-statistics: Get packet statistics

--wds-get-data-bearer-technology: Get data bearer technology

--wds-get-current-data-bearer-technology: Get current data bearer technology

--wds-go-dormant: Make the active data connection go dormant

--wds-go-active: Make the active data connection go active

--wds-get-dormancy-status: Get the dormancy status of the active data connection

--wds-create-profile=["(3gpp|3gpp2)[,key=value,...]"]: Create new profile using first available profile index (optional keys: name, apn, pdp-type (IP|PPP|IPV6|IPV4V6), auth (NONE|PAP|CHAP|BOTH), username, password, context-num, no-roaming=yes, disabled=yes)

--wds-swi-create-profile-indexed=["(3gpp|3gpp2),#[,key=value,...]"]: Create new profile at specified profile index [Sierra Wireless specific] (optional keys: name, apn, pdp-type (IP|PPP|IPV6|IPV4V6), auth (NONE|PAP|CHAP|BOTH), username, password, context-num, no-roaming=yes, disabled=yes)

--wds-modify-profile=["(3gpp|3gpp2),#,key=value,..."]: Modify existing profile (optional keys: name, apn, pdp-type (IP|PPP|IPV6|IPV4V6), auth (NONE|PAP|CHAP|BOTH), username, password, context-num, no-roaming=yes, disabled=yes)

--wds-delete-profile=[(3gpp|3gpp2),#]: Delete existing profile

--wds-get-profile-list=[3gpp|3gpp2]: Get profile list

--wds-get-default-profile-number=[3gpp|3gpp2]: Get default profile number

--wds-set-default-profile-number=[(3gpp|3gpp2),#]: Set default profile number

--wds-get-default-settings=[3gpp|3gpp2]: Get default settings

--wds-get-autoconnect-settings: Get autoconnect settings

--wds-set-autoconnect-settings=[(enabled|disabled|paused)[,(roaming-allowed|home-only)]]: Set autoconnect settings (roaming settings optional)

--wds-get-supported-messages: Get supported messages

--wds-reset: Reset the service state

--wds-bind-data-port=[a2-mux-rmnet0-7|#]: Bind data port to controller device to be used with `--client-no-release-cid'

--wds-bind-mux-data-port=["key=value,..."]: Bind qmux data port to controller device (allowed keys: mux-id, ep-type (undefined|hsusb|pcie|embedded|bam-dmux), ep-iface-number) to be used with `--client-no-release-cid'

--wds-set-ip-family=[4|6]: Set IP family

--wds-get-channel-rates: Get channel data rates

--wds-get-lte-attach-parameters: Get LTE attach parameters

--wds-get-max-lte-attach-pdn-num: Get the maximum number of LTE attach PDN

--wds-get-lte-attach-pdn-list: Get the list of LTE attach PDN

--wds-set-lte-attach-pdn-list=[#,#,...]: Set the list of LTE attach PDN

--wds-noop: Just allocate or release a WDS client. Use with `--client-no-release-cid' and/or `--client-cid'

PBM options:

--pbm-get-all-capabilities: Get all phonebook capabilities

--pbm-get-emergency-list: Get list of emergency numbers

--pbm-noop: Just allocate or release a PBM client. Use with `--client-no-release-cid' and/or `--client-cid'

PDC options:

--pdc-list-configs=[(platform|software)]: List all configs

--pdc-delete-config=[(platform|software),ConfigId]: Delete config

--pdc-activate-config=[(platform|software),ConfigId]: Activate config

--pdc-deactivate-config=[(platform|software),ConfigId]: Deactivate config

--pdc-load-config=[Path to config]: Load config to device

--pdc-monitor-refresh: Watch for refresh indications

--pdc-noop: Just allocate or release a PDC client. Use with `--client-no-release-cid' and/or `--client-cid'

UIM options:

--uim-set-pin-protection=[(PIN1|PIN2|UPIN),(disable|enable),(current PIN)[,"key=value,..."]]: Set PIN protection (allowed keys: session-type ((primary|secondary|tertiary|quarternary|quinary)-gw-provisioning|card-slot-[1-5]))

--uim-verify-pin=[(PIN1|PIN2|UPIN),(current PIN)[,"key=value,..."]]: Verify PIN (allowed keys: session-type ((primary|secondary|tertiary|quarternary|quinary)-gw-provisioning|card-slot-[1-5]))

--uim-unblock-pin=[(PIN1|PIN2|UPIN),(PUK),(new PIN)[,"key=value,..."]]: Unblock PIN (allowed keys: session-type ((primary|secondary|tertiary|quarternary|quinary)-gw-provisioning|card-slot-[1-5]))

--uim-change-pin=[(PIN1|PIN2|UPIN),(old PIN),(new PIN)[,"key=value,..."]]: Change PIN (allowed keys: session-type ((primary|secondary|tertiary|quarternary|quinary)-gw-provisioning|card-slot-[1-5]))

--uim-read-transparent=[0xNNNN,0xNNNN,...]: Read a transparent file given the file path

--uim-get-file-attributes=[0xNNNN,0xNNNN,...]: Get the attributes of a given file

--uim-read-record=["key=value,..."]: Read a record from given file (allowed keys: record-number, record-length, file ([0xNNNN-0xNNNN,...])

--uim-get-card-status: Get card status

--uim-get-supported-messages: Get supported messages

`--uim-sim-power-on=[(slot number)]`	Power on SIM card
`--uim-sim-power-off=[(slot number)]`	Power off SIM card

--uim-change-provisioning-session=["key=value,..."]: Change provisioning session (allowed keys: session-type ((primary|secondary|tertiary|quarternary|quinary)-gw-provisioning), activate (yes|no), slot, aid)

--uim-get-slot-status: Get slot status

--uim-switch-slot=[(slot number)]: Switch active physical slot

--uim-monitor-slot-status: Watch for slot status indications

--uim-reset: Reset the service state

--uim-monitor-refresh-file=[0xNNNN,0xNNNN,...]: Watch for REFRESH events for given file paths

--uim-monitor-refresh-all: Watch for REFRESH events for any file

--uim-get-configuration: Get personalization status of the modem

--uim-depersonalization=[(feature),(operation),(control key)[,(slot number)]]: Deactivates or unblocks personalization feature

--uim-remote-unlock=[XX:XX:...]: Updates the SimLock configuration data

`--uim-open-logical-channel=[(slot number),(aid)]`	Open logical channel
`--uim-close-logical-channel=[(slot number),(channel ID)]`	Close logical channel
`--uim-send-apdu=[(slot number),(channel ID),(apdu)]`	Send APDU

--uim-noop: Just allocate or release a UIM client. Use with `--client-no-release-cid' and/or `--client-cid'

SAR options:

--sar-rf-get-state: Get RF state

--sar-rf-set-state=[(state number)]: Set RF state.

--sar-noop: Just allocate or release a SAR client. Use with `--client-no-release-cid' and/or `--client-cid'

WMS options:

--wms-get-supported-messages: Get supported messages

--wms-get-routes: Get SMS route information

--wms-set-routes=["key=value,..."]: Set SMS route information (keys: type, class, storage, receipt-action)

--wms-set-cbs-channels=[start-end,start-end]: Set CBS channels (e.g. 4371-4372,4370,4373-4380

--wms-get-cbs-channels: Get CBS channels

--wms-reset: Reset the service state

--wms-noop: Just allocate or release a WMS client. Use with `--client-no-release-cid' and/or `--client-cid'

WDA options:

--wda-set-data-format=["key=value,..."]: Set data format (allowed keys: link-layer-protocol (802-3|raw-ip), ul-protocol (disabled|tlp|qc-ncm|mbim|rndis|qmap|qmapv5), dl-protocol (disabled|tlp|qc-ncm|mbim|rndis|qmap|qmapv5), dl-datagram-max-size, dl-max-datagrams, ep-type (undefined|hsusb|pcie|embedded), ep-iface-number, ul-datagram-max-size, ul-max-datagrams)

--wda-get-data-format=["key=value,..."]: Get data format (allowed keys: ep-type (undefined|hsusb|pcie|embedded), ep-iface-number); also allows empty key list

--wda-get-supported-messages: Get supported messages

--wda-set-loopback-configuration=["key=value,..."]: Set loopback configuration (allowed keys: state (enabled|disabled), replication-factor);

--wda-noop: Just allocate or release a WDA client. Use with `--client-no-release-cid' and/or `--client-cid'

VOICE options:

--voice-get-config: Get Voice service configuration

--voice-get-supported-messages: Get supported messages

--voice-noop: Just allocate or release a VOICE client. Use with `--client-no-release-cid' and/or `--client-cid'

LOC options:

--loc-session-id=[ID]: Session ID for the LOC session

--loc-start: Start location gathering

--loc-stop: Stop location gathering

--loc-get-position-report: Get position reported by the location module

--loc-get-gnss-sv-info: Show GNSS space vehicle info

--loc-timeout=[SECS]: Maximum time to wait for information in `--loc-get-position-report' and `--loc-get-gnss-sv-info' (default 30s)

--loc-follow-position-report: Follow all position updates reported by the location module indefinitely

--loc-follow-gnss-sv-info: Follow all GNSS space vehicle info updates reported by the location module indefinitely

--loc-follow-nmea: Follow all NMEA trace updates reported by the location module indefinitely

--loc-delete-assistance-data: Delete positioning assistance data

--loc-get-nmea-types: Get list of enabled NMEA traces

--loc-set-nmea-types=[type1|type2|type3...]: Set list of enabled NMEA traces

--loc-get-operation-mode: Get operation mode

--loc-set-operation-mode=[default|msb|msa|standalone|cellid|wwan]: Set operation mode

--loc-get-engine-lock: Get engine lock status

--loc-set-engine-lock=[none|mi|mt|all]: Set engine lock status

`--loc-inject-position-latitude=-90.0 to 90.0. Positive values indicate northern latitude.`	Inject latitude into GNSS engine
`--loc-inject-position-longitude=-180.0 to 180.0. Positive values indicate eastern longitude.`	Inject longitude into GNSS engine

--loc-inject-time: Inject UTC time into GNSS engine

--loc-get-predicted-orbits-data-source: Get predicted orbits data source

--loc-get-predicted-orbits-data-validity: Get predicted orbits data validity information

--loc-noop: Just allocate or release a LOC client. Use with `--client-no-release-cid' and/or `--client-cid'

QoS options:

--qos-get-flow-status=[QoS ID]: Get QoS flow status

--qos-get-network-status: Gets the network status

--qos-swi-read-data-stats=[APN ID]: Read data stats (Sierra Wireless specific)

--qos-reset: Reset the service state

--qos-noop: Just allocate or release a QOS client. Use with `--client-no-release-cid' and/or `--client-cid'

GAS options:

--gas-dms-set-usb-composition=[pid]: Sets the USB composition

--gas-dms-get-usb-composition: Gets the current USB composition

--gas-dms-get-firmware-list: Gets the list of stored firmware

--gas-dms-get-active-firmware: Gets the currently active firmware

--gas-dms-set-active-firmware=[index]: Sets the active firmware index

--gas-dms-get-ethernet-mac-address: Gets the Ethernet PDU MAC address available in the modem

--gas-dms-set-firmware-auto-sim=["key=value,..."]: Sets the automatic carrier switching mode according to the sim (allowed keys: mode (disable|enable|enable-one-shot), config-id

--gas-dms-get-firmware-auto-sim: Gets the automatic carrier switching mode according to the sim

--gas-noop: Just allocate or release a GAS client. Use with `--client-no-release-cid' and/or `--client-cid'

GMS options:

--gms-test-get-value: Gets test value

--gms-test-set-value=[mandatory-value][,[optional-value]]: Sets test value

--gms-noop: Just allocate or release a GMS client. Use with `--client-no-release-cid' and/or `--client-cid'

DSD options:

--dsd-get-apn-info=[(type)]: Gets the settings associated to a given APN type

--dsd-set-apn-type=[(name), (type1|type2|type3...)]: Sets the types associated to a given APN name

--dsd-get-system-status: Gets system status

--dsd-noop: Just allocate or release a DSD client. Use with `--client-no-release-cid' and/or `--client-cid'

DPM options:

--dpm-open-port=["key=value,..."]: Open port (allowed-keys: ctrl-ep-type, ctrl-ep-iface-number, ctrl-port-name, hw-data-ep-type, hw-data-ep-iface-number, hw-data-rx-id, hw-data-tx-id, sw-data-ep-type, sw-data-ep-iface-number, sw-data-port-name)

--dpm-close-port: Close port

--dpm-noop: Just allocate or release a DPM client. Use with `--client-no-release-cid' and/or `--client-cid'

FOX options:

--fox-get-firmware-version=[firmware-mcfg-apps|firmware-mcfg|apps]: Get firmware version

--fox-set-fcc-authentication=[magic-string,magic-number]: Set FCC authentication

--fox-noop: Just allocate or release a FOX client. Use with `--client-no-release-cid' and/or `--client-cid'

ATR options:

`--atr-send=[AT command]`	Send an AT command and wait for the reply
`--atr-send-only=[AT command]`	Send an AT command without waiting for the reply

--atr-monitor: Watch for unsolicited indications

--atr-noop: Just allocate or release an ATR client. Use with `--client-no-release-cid' and/or `--client-cid'

IMSP options:

--imsp-get-enabler-state: Get IMSP enabler state

--imsp-noop: Just allocate or release a IMSP client. Use with `--client-no-release-cid' and/or `--client-cid'

IMSA options:

--imsa-bind=[binding]: Bind to IMSA (use with --client-no-release-cid)

--imsa-get-ims-registration-status: Get IMS registration status

--imsa-get-ims-services-status: Get IMS services status

--imsa-noop: Just allocate or release a IMSA client. Use with `--client-no-release-cid' and/or `--client-cid'

IMS options:

--ims-bind=[binding]: Bind to IMS Settings (use with --client-no-release-cid)

--ims-get-ims-services-enabled-setting: Get IMS Services Enabled Setting

--ims-noop: Just allocate or release a IMS client. Use with `--client-no-release-cid' and/or `--client-cid'

Link management options:

--link-list=[IFACE]: List links created from a given interface

--link-add=[iface=IFACE,prefix=PREFIX[,mux-id=N[,initial-mux-id=M]][,flags=FLAGS]]: Create new network interface link

--link-delete=[link-iface=IFACE][,[mux-id=N]]: Delete a given network interface link

--link-delete-all=[IFACE]: Delete all network interface links from the given interface

qmi_wwan specific options:

-w, --get-wwan-iface: Get the associated WWAN iface name

-e, --get-expected-data-format: Get the expected data format in the WWAN iface

-E, --set-expected-data-format=[802-3|raw-ip|qmap-pass-through]: Set the expected data format in the WWAN iface

Application Options:

-d, --device=[PATH|URI]: Specify device path or QRTR URI (e.g. qrtr://0)

--get-service-version-info: Get service version info

--device-set-instance-id=[Instance ID]: Set instance ID

--device-open-version-info: Run version info check when opening device

--device-open-sync: Run sync operation when opening device

-p, --device-open-proxy: Request to use the 'qmi-proxy' proxy

--device-open-qmi: Open a cdc-wdm device explicitly in QMI mode

--device-open-mbim: Open a cdc-wdm device explicitly in MBIM mode

--device-open-auto: Open a cdc-wdm device in either QMI or MBIM mode (default)

--device-open-net=[net-802-3|net-raw-ip|net-qos-header|net-no-qos-header]: Open device with specific link protocol and QoS flags

--client-cid=[CID]: Use the given CID, don't allocate a new one

--client-no-release-cid: Do not release the CID when exiting

-v, --verbose: Run action with verbose logs, including the debug ones

--verbose-full: Run action with verbose logs, including the debug ones and personal info

--silent: Run action with no logs; not even the error/warning ones

-V, --version: Print version

Releases

7 releases since Debian 8 (Jessie); the text changed 6 times.

8
9
10
11
12
13
Arch

--atr-monitor since Debian 13 (Trixie); --atr-noop since Debian 13 (Trixie); --device-open-auto since Debian 10 (Buster); --device-open-mbim since Debian 9 (Stretch); --device-open-qmi since Debian 10 (Buster); --dms-foxconn-change-device-mode since Debian 11 (Bullseye); --dms-foxconn-get-firmware-version since Debian 11 (Bullseye); --dms-foxconn-set-fcc-authentication since Debian 12 (Bookworm); --dms-foxconn-set-fcc-authentication-v2 since Debian 12 (Bookworm); --dms-get-boot-image-download-mode since Debian 10 (Buster); --dms-get-firmware-preference since Debian 10 (Buster); --dms-get-mac-address since Debian 11 (Bullseye); --dms-get-software-version since Debian 10 (Buster); --dms-get-supported-messages since Debian 9 (Stretch); --dms-hp-change-device-mode since Debian 10 (Buster); --dms-set-boot-image-download-mode since Debian 10 (Buster); --dms-set-fcc-authentication since Debian 9 (Stretch); --dms-set-firmware-id since Debian 10 (Buster); --dms-set-firmware-preference since Debian 10 (Buster); --dms-swi-get-current-firmware since Debian 10 (Buster); --dms-swi-get-usb-composition since Debian 10 (Buster); --dms-swi-set-usb-composition since Debian 10 (Buster); --dpm-close-port since Debian 12 (Bookworm); --dpm-noop since Debian 12 (Bookworm); --dpm-open-port since Debian 12 (Bookworm); --dsd-get-apn-info since Debian 11 (Bullseye); --dsd-get-system-status since Debian 12 (Bookworm); --dsd-noop since Debian 11 (Bullseye); --fox-get-firmware-version since Debian 12 (Bookworm); --fox-noop since Debian 12 (Bookworm); --fox-set-fcc-authentication since Arch Linux 2026-11-01; --gas-dms-get-active-firmware since Debian 11 (Bullseye); --gas-dms-get-ethernet-mac-address since Debian 13 (Trixie); --gas-dms-get-firmware-auto-sim since Debian 13 (Trixie); --gas-dms-get-firmware-list since Debian 11 (Bullseye); --gas-dms-get-usb-composition since Debian 12 (Bookworm); --gas-dms-set-active-firmware since Debian 11 (Bullseye); --gas-dms-set-firmware-auto-sim since Debian 13 (Trixie); --gas-dms-set-usb-composition since Debian 12 (Bookworm); --gas-noop since Debian 11 (Bullseye); --get-expected-data-format since Debian 9 (Stretch); --get-wwan-iface since Debian 9 (Stretch); --gms-noop since Debian 11 (Bullseye); --gms-test-get-value since Debian 11 (Bullseye); --gms-test-set-value since Debian 11 (Bullseye); --help-atr since Debian 13 (Trixie); --help-dpm since Debian 12 (Bookworm); --help-dsd since Debian 11 (Bullseye); --help-fox since Debian 12 (Bookworm); --help-gas since Debian 11 (Bullseye); --help-gms since Debian 11 (Bullseye); --help-ims since Debian 13 (Trixie); --help-imsa since Debian 13 (Trixie); --help-imsp since Debian 13 (Trixie); --help-link-management since Debian 12 (Bookworm); --help-loc since Debian 10 (Buster); --help-pdc since Debian 10 (Buster); --help-qmiwwan since Debian 12 (Bookworm); --help-qos since Debian 10 (Buster); --help-sar since Debian 12 (Bookworm); --help-voice since Debian 9 (Stretch); --help-wms since Debian 9 (Stretch); --ims-bind since Debian 13 (Trixie); --ims-get-ims-services-enabled-setting since Debian 13 (Trixie); --ims-noop since Debian 13 (Trixie); --imsa-bind since Debian 13 (Trixie); --imsa-get-ims-registration-status since Debian 13 (Trixie); --imsa-get-ims-services-status since Debian 13 (Trixie); --imsa-noop since Debian 13 (Trixie); --imsp-get-enabler-state since Debian 13 (Trixie); --imsp-noop since Debian 13 (Trixie); --link-add since Debian 12 (Bookworm); --link-delete since Debian 12 (Bookworm); --link-delete-all since Debian 12 (Bookworm); --link-list since Debian 12 (Bookworm); --loc-delete-assistance-data since Debian 10 (Buster); --loc-follow-gnss-sv-info since Debian 10 (Buster); --loc-follow-nmea since Debian 10 (Buster); --loc-follow-position-report since Debian 10 (Buster); --loc-get-engine-lock since Debian 12 (Bookworm); --loc-get-gnss-sv-info since Debian 10 (Buster); --loc-get-nmea-types since Debian 11 (Bullseye); --loc-get-operation-mode since Debian 12 (Bookworm); --loc-get-position-report since Debian 10 (Buster); --loc-get-predicted-orbits-data-source since Arch Linux 2026-11-01; --loc-get-predicted-orbits-data-validity since Arch Linux 2026-11-01; --loc-inject-time since Arch Linux 2026-11-01; --loc-noop since Debian 10 (Buster); --loc-session-id since Debian 10 (Buster); --loc-set-engine-lock since Debian 12 (Bookworm); --loc-set-nmea-types since Debian 11 (Bullseye); --loc-set-operation-mode since Debian 12 (Bookworm); --loc-start since Debian 10 (Buster); --loc-stop since Debian 10 (Buster); --loc-timeout since Debian 10 (Buster); --nas-force-network-search since Debian 9 (Stretch); --nas-get-drx since Debian 12 (Bookworm); --nas-get-endc-config since Arch Linux 2026-11-01; --nas-get-lte-cphy-ca-info since Debian 9 (Stretch); --nas-get-network-time since Debian 13 (Trixie); --nas-get-operator-name since Debian 10 (Buster); --nas-get-plmn-name since Debian 12 (Bookworm); --nas-get-preferred-networks since Debian 12 (Bookworm); --nas-get-rf-band-info since Debian 10 (Buster); --nas-get-supported-messages since Debian 9 (Stretch); --nas-incremental-network-scan since Arch Linux 2026-11-01; --nas-set-preferred-networks since Debian 12 (Bookworm); --nas-swi-get-status since Debian 11 (Bullseye); --pbm-get-emergency-list since Arch Linux 2026-11-01; --pdc-activate-config since Debian 10 (Buster); --pdc-deactivate-config since Debian 10 (Buster); --pdc-delete-config since Debian 10 (Buster); --pdc-list-configs since Debian 10 (Buster); --pdc-monitor-refresh since Debian 12 (Bookworm); --pdc-noop since Debian 10 (Buster); --qos-get-network-status since Debian 10 (Buster); --qos-noop since Debian 10 (Buster); --qos-reset since Debian 10 (Buster); --sar-noop since Debian 12 (Bookworm); --sar-rf-get-state since Debian 12 (Bookworm); --set-expected-data-format since Debian 9 (Stretch); --uim-change-provisioning-session since Debian 11 (Bullseye); --uim-get-configuration since Debian 12 (Bookworm); --uim-get-slot-status since Debian 11 (Bullseye); --uim-get-supported-messages since Debian 9 (Stretch); --uim-monitor-refresh-all since Debian 12 (Bookworm); --uim-monitor-refresh-file since Debian 12 (Bookworm); --uim-monitor-slot-status since Debian 11 (Bullseye); --uim-read-record since Debian 10 (Buster); --uim-remote-unlock since Debian 13 (Trixie); --verbose-full since Debian 12 (Bookworm); --voice-get-config since Debian 9 (Stretch); --voice-get-supported-messages since Debian 9 (Stretch); --voice-noop since Debian 9 (Stretch); --wda-get-supported-messages since Debian 9 (Stretch); --wda-set-loopback-configuration since Debian 13 (Trixie); --wds-bind-data-port since Debian 12 (Bookworm); --wds-bind-mux-data-port since Debian 10 (Buster); --wds-create-profile since Debian 10 (Buster); --wds-delete-profile since Debian 10 (Buster); --wds-get-autoconnect-settings since Debian 9 (Stretch); --wds-get-channel-rates since Debian 10 (Buster); --wds-get-current-settings since Debian 9 (Stretch); --wds-get-default-profile-number since Debian 12 (Bookworm); --wds-get-dormancy-status since Debian 10 (Buster); --wds-get-lte-attach-parameters since Debian 12 (Bookworm); --wds-get-lte-attach-pdn-list since Debian 12 (Bookworm); --wds-get-max-lte-attach-pdn-num since Debian 12 (Bookworm); --wds-get-supported-messages since Debian 9 (Stretch); --wds-go-active since Debian 10 (Buster); --wds-go-dormant since Debian 10 (Buster); --wds-modify-profile since Debian 10 (Buster); --wds-set-autoconnect-settings since Debian 9 (Stretch); --wds-set-default-profile-number since Debian 12 (Bookworm); --wds-set-ip-family since Debian 10 (Buster); --wds-set-lte-attach-pdn-list since Debian 12 (Bookworm); --wds-swi-create-profile-indexed since Debian 10 (Buster); --wms-get-cbs-channels since Arch Linux 2026-11-01; --wms-get-routes since Debian 12 (Bookworm); --wms-get-supported-messages since Debian 9 (Stretch); --wms-noop since Debian 9 (Stretch); --wms-reset since Debian 9 (Stretch); --wms-set-cbs-channels since Arch Linux 2026-11-01; --wms-set-routes since Debian 12 (Bookworm); -E since Debian 9 (Stretch); -e since Debian 9 (Stretch); -w since Debian 9 (Stretch).

--wds-get-default-profile-num until Debian 11 (Bullseye); --wds-set-default-profile-num until Debian 11 (Bullseye).