qmicli(1) on Linux
The text bf809abe37e5, as Debian 13 (Trixie) shipped it.
Control QMI devices
Flags it lists
-
--atr-monitor -
--atr-noop -
--client-cid -
--client-no-release-cid -
--device -
--device-open-auto -
--device-open-mbim -
--device-open-net -
--device-open-proxy -
--device-open-qmi -
--device-open-sync -
--device-open-version-info -
--dms-activate-manual -
--dms-foxconn-change-device-mode -
--dms-foxconn-get-firmware-version -
--dms-foxconn-set-fcc-authentication -
--dms-foxconn-set-fcc-authentication-v2 -
--dms-get-activation-state -
--dms-get-band-capabilities -
--dms-get-boot-image-download-mode -
--dms-get-capabilities -
--dms-get-factory-sku -
--dms-get-firmware-preference -
--dms-get-hardware-revision -
--dms-get-ids -
--dms-get-mac-address -
--dms-get-manufacturer -
--dms-get-model -
--dms-get-msisdn -
--dms-get-operating-mode -
--dms-get-power-state -
--dms-get-prl-version -
--dms-get-revision -
--dms-get-software-version -
--dms-get-supported-messages -
--dms-get-time -
--dms-get-user-lock-state -
--dms-hp-change-device-mode -
--dms-list-stored-images -
--dms-noop -
--dms-read-eri-file -
--dms-read-user-data -
--dms-reset -
--dms-set-boot-image-download-mode -
--dms-set-fcc-authentication -
--dms-set-firmware-id -
--dms-set-firmware-preference -
--dms-swi-get-current-firmware -
--dms-swi-get-usb-composition -
--dms-swi-set-usb-composition -
--dms-uim-get-ck-status -
--dms-uim-get-iccid -
--dms-uim-get-imsi -
--dms-uim-get-pin-status -
--dms-uim-get-state -
--dms-uim-set-ck-protection -
--dms-uim-unblock-ck -
--dpm-close-port -
--dpm-noop -
--dpm-open-port -
--dsd-get-apn-info -
--dsd-get-system-status -
--dsd-noop -
--fox-get-firmware-version -
--fox-noop -
--gas-dms-get-active-firmware -
--gas-dms-get-ethernet-mac-address -
--gas-dms-get-firmware-auto-sim -
--gas-dms-get-firmware-list -
--gas-dms-get-usb-composition -
--gas-dms-set-active-firmware -
--gas-dms-set-firmware-auto-sim -
--gas-dms-set-usb-composition -
--gas-noop -
--get-expected-data-format -
--get-service-version-info -
--get-wwan-iface -
--gms-noop -
--gms-test-get-value -
--gms-test-set-value -
--help -
--help-all -
--help-atr -
--help-dms -
--help-dpm -
--help-dsd -
--help-fox -
--help-gas -
--help-gms -
--help-ims -
--help-imsa -
--help-imsp -
--help-link-management -
--help-loc -
--help-nas -
--help-pbm -
--help-pdc -
--help-qmiwwan -
--help-qos -
--help-sar -
--help-uim -
--help-voice -
--help-wda -
--help-wds -
--help-wms -
--ims-bind -
--ims-get-ims-services-enabled-setting -
--ims-noop -
--imsa-bind -
--imsa-get-ims-registration-status -
--imsa-get-ims-services-status -
--imsa-noop -
--imsp-get-enabler-state -
--imsp-noop -
--link-add -
--link-delete -
--link-delete-all -
--link-list -
--loc-delete-assistance-data -
--loc-follow-gnss-sv-info -
--loc-follow-nmea -
--loc-follow-position-report -
--loc-get-engine-lock -
--loc-get-gnss-sv-info -
--loc-get-nmea-types -
--loc-get-operation-mode -
--loc-get-position-report -
--loc-noop -
--loc-session-id -
--loc-set-engine-lock -
--loc-set-nmea-types -
--loc-set-operation-mode -
--loc-start -
--loc-stop -
--loc-timeout -
--nas-force-network-search -
--nas-get-cell-location-info -
--nas-get-drx -
--nas-get-home-network -
--nas-get-lte-cphy-ca-info -
--nas-get-network-time -
--nas-get-operator-name -
--nas-get-plmn-name -
--nas-get-preferred-networks -
--nas-get-rf-band-info -
--nas-get-serving-system -
--nas-get-signal-info -
--nas-get-signal-strength -
--nas-get-supported-messages -
--nas-get-system-info -
--nas-get-system-selection-preference -
--nas-get-technology-preference -
--nas-network-scan -
--nas-noop -
--nas-reset -
--nas-set-preferred-networks -
--nas-set-system-selection-preference -
--nas-swi-get-status -
--pbm-get-all-capabilities -
--pbm-noop -
--pdc-activate-config -
--pdc-deactivate-config -
--pdc-delete-config -
--pdc-list-configs -
--pdc-monitor-refresh -
--pdc-noop -
--qos-get-network-status -
--qos-noop -
--qos-reset -
--sar-noop -
--sar-rf-get-state -
--set-expected-data-format -
--silent -
--uim-change-provisioning-session -
--uim-get-card-status -
--uim-get-configuration -
--uim-get-file-attributes -
--uim-get-slot-status -
--uim-get-supported-messages -
--uim-monitor-refresh-all -
--uim-monitor-refresh-file -
--uim-monitor-slot-status -
--uim-noop -
--uim-read-record -
--uim-read-transparent -
--uim-remote-unlock -
--uim-reset -
--verbose -
--verbose-full -
--version -
--voice-get-config -
--voice-get-supported-messages -
--voice-noop -
--wda-get-data-format -
--wda-get-supported-messages -
--wda-noop -
--wda-set-data-format -
--wda-set-loopback-configuration -
--wds-bind-data-port -
--wds-bind-mux-data-port -
--wds-create-profile -
--wds-delete-profile -
--wds-follow-network -
--wds-get-autoconnect-settings -
--wds-get-channel-rates -
--wds-get-current-data-bearer-technology -
--wds-get-current-settings -
--wds-get-data-bearer-technology -
--wds-get-default-profile-number -
--wds-get-default-settings -
--wds-get-dormancy-status -
--wds-get-lte-attach-parameters -
--wds-get-lte-attach-pdn-list -
--wds-get-max-lte-attach-pdn-num -
--wds-get-packet-service-status -
--wds-get-packet-statistics -
--wds-get-profile-list -
--wds-get-supported-messages -
--wds-go-active -
--wds-go-dormant -
--wds-modify-profile -
--wds-noop -
--wds-reset -
--wds-set-autoconnect-settings -
--wds-set-default-profile-number -
--wds-set-ip-family -
--wds-set-lte-attach-pdn-list -
--wds-start-network -
--wds-swi-create-profile-indexed -
--wms-get-routes -
--wms-get-supported-messages -
--wms-noop -
--wms-reset -
--wms-set-routes -
-E -
-V -
-d -
-e -
-h -
-p -
-v -
-w