ovsdb-server1

Open vswitch database server

Usage

ovsdb-server [database] ... [relay:schema_name:remote] ... [--remote=remote] ... [--config-file=file] [--run=command]

Overview

The ovsdb-server program provides RPC interfaces to one or more Open vSwitch databases (OVSDBs). It supports JSON-RPC client connections over active or passive TCP/IP or Unix domain sockets. For an introduction to OVSDB and its implementation in Open vSwitch, see ovsdb(7).

Each OVSDB file may be specified on the command line as database. Relay databases may be specified on the command line as relay:schema_name:remote. For a detailed description of relay database argument, see ovsdb(7). If none of database files or relay databases is specified, the default is /etc/openvswitch/conf.db. The database files must already have been created and initialized using, for example, ovsdb-tool's create, create-cluster, or join-cluster command.

All types of databases can alternatively be added using a configuration file provided via --config-file option. This option is mutually exclusive with specifying database on the command line. For a detailed description of the configuration file format see ovsdb(7).

This OVSDB implementation supports standalone, active-backup, relay and clustered database service models, as well as database replication. See the Service Models section of ovsdb(7) for more information.

For clustered databases, when the --detach option is used, ovsdb-server detaches without waiting for the server to successfully join a cluster (if the database file is freshly created with ovsdb-tool join-cluster) or connect to a cluster that it has already joined. Use ovsdb-client wait (see ovsdb-client(1)) to wait until the server has successfully joined and connected to a cluster. The same is true for relay databases. Same commands could be used to wait for a relay database to connect to the relay source (remote).

In addition to user-specified databases, ovsdb-server version 2.9 and later also always hosts a built-in database named _Server. Please see ovsdb-server(5) for documentation on this database's schema.

Options

--remote=remote

Adds remote as a connection method used by ovsdb-server. The remote may be an OVSDB active or passive connection method, e.g. pssl:6640, as described in ovsdb(7). The following additional form is also supported:

db:db,table,column: Reads additional connection methods from column in all of the rows in table within db. As the contents of column changes, ovsdb-server also adds and drops connection methods accordingly.

: If column's type is string or set of strings, then the connection methods are taken directly from the column. The connection methods in the column must have one of the forms described above.

If column's type is UUID or set of UUIDs and references a table, then each UUID is looked up in the referenced table to obtain a row. The following columns in the row, if present and of the correct type, configure a connection method. Any additional columns are ignored.

target (string): Connection method, in one of the forms described above. This column is mandatory: if it is missing or empty then no connection method can be configured.

max_backoff (integer): Maximum number of milliseconds to wait between connection attempts.

inactivity_probe (integer): Maximum number of milliseconds of idle time on connection to client before sending an inactivity probe message.

read_only (boolean): If true, only read-only transactions are allowed on this connection.

: It is an error for column to have another type.

: To connect or listen on multiple connection methods, use multiple --remote options.

: Alternatively, remotes can be specified in a "remotes" section of the configuration file, if provided using --config-file option. --config-file and --remote options are mutually exclusive.

--config-file=file

Specifies a configuration file for ovsdb-server. This file can contain connection methods and databases used by the server. The file contains a JSON object with two main elements:

remotes: JSON object that contains a set of connection methods in the following format: "target": { "option": value, ... }. Where target is in the same format as remote in --remote option. option can be max-backoff (integer), inactivity-probe (integer), read-only (boolean), role (string) or dscp (integer) with their allowed values respectively. The meaning of these options is the same as in configuration of remote via a database row with --remote option.

databases

JSON object that describes databases that should be added to the ovsdb-server in the following format: "name":{ "option": value, ... }. Where name is either a file name of a previously created and initialized database or a schema name in case of relay databases. Available options are:

service-model (string): Describes the service model of this database. One of: standalone, clustered, active-backup or relay. This option is required for all types, except for standalone and clustered. For these databases the service model will be inferred from the file, if not specified explicitly. ovsdb-server will refuse to add a database if the specified service-model doesn't match with the provided file.

source (JSON object; active-backup or relay): Describes the connection method to the active database or to the relay source. It is a JSON object with exactly one element in the same format as elements of "remotes", except that read-only and role options are not applicable. E.g. "source": { "unix:db.sock": { "inactivity-probe": 10000, "max-backoff": 8000 } }

backup (boolean; active-backup only): If set to true, ovsdb-server will use this database as a backup for the specified source. Will be served as an active database otherwise.

exclude-tables (JSON array of strings; active-backup only): List of table names that should be excluded from replication in backup mode, e.g. "exclude-tables": [ "Table_One", "Table_Two" ].

: Content of the most basic configuration file may look like this: { "remotes": { "pssl:6640": {} }, "databases": { "conf.db": {} } }

: Examples of configuration files for different service models can be found in in ovsdb(7).

: --config-file option is mutually exclusive with the --remote as well as with specifying database on a command line. It is also mutually exclusive with all the Active-Backup Options and all the RUNTIME MANAGEMENT COMMANDS that can change the configuration of the server in conflict with the content of the file, i.e. all the commands that manipulate with remotes and databases. Read-only commands can still be used.

: In case of changes in the file, users should run the ovsdb-server/reload command with ovs-appctl(8) in order for changes to take effect.

--run=command]: Ordinarily ovsdb-server runs forever, or until it is told to exit (see RUNTIME MANAGEMENT COMMANDS below). With this option, ovsdb-server instead starts a shell subprocess running command. When the subprocess terminates, ovsdb-server also exits gracefully. If the subprocess exits normally with exit code 0, then ovsdb-server exits with exit code 0 also; otherwise, it exits with exit code 1.

: This option can be useful where a database server is needed only to run a single command, e.g.: ovsdb-server --remote=punix:socket --run='ovsdb-client dump unix:socket Open_vSwitch'

Daemon Options

The following options are valid on POSIX based platforms.

--pidfile[=pidfile]: Causes a file (by default, ovsdb-server.pid) to be created indicating the PID of the running process. If the pidfile argument is not specified, or if it does not begin with /, then it is created in /run/openvswitch.

: If --pidfile is not specified, no pidfile is created.

--overwrite-pidfile: By default, when --pidfile is specified and the specified pidfile already exists and is locked by a running process, ovsdb-server refuses to start. Specify --overwrite-pidfile to cause it to instead overwrite the pidfile.

: When --pidfile is not specified, this option has no effect.

--detach: Runs ovsdb-server as a background process. The process forks, and in the child it starts a new session, closes the standard file descriptors (which has the side effect of disabling logging to the console), and changes its current directory to the root (unless --no-chdir is specified). After the child completes its initialization, the parent exits. ovsdb-server detaches only after it starts listening on all configured remotes. At this point, all standalone and active-backup databases are ready for use. Clustered databases only become ready for use after they finish joining their clusters (which could have already happened in previous runs of ovsdb-server).

--monitor: Creates an additional process to monitor the ovsdb-server daemon. If the daemon dies due to a signal that indicates a programming error (SIGABRT, SIGALRM, SIGBUS, SIGFPE, SIGILL, SIGPIPE, SIGSEGV, SIGXCPU, or SIGXFSZ) then the monitor process starts a new copy of it. If the daemon dies or exits for another reason, the monitor process exits.

: This option is normally used with --detach, but it also functions without it.

--no-chdir: By default, when --detach is specified, ovsdb-server changes its current working directory to the root directory after it detaches. Otherwise, invoking ovsdb-server from a carelessly chosen directory would prevent the administrator from unmounting the file system that holds that directory.

: Specifying --no-chdir suppresses this behavior, preventing ovsdb-server from changing its current working directory. This may be useful for collecting core files, since it is common behavior to write core dumps into the current working directory and the root directory is not a good directory to use.

: This option has no effect when --detach is not specified.

--no-self-confinement: By default daemon will try to self-confine itself to work with files under well-known directories determined during build. It is better to stick with this default behavior and not to use this flag unless some other Access Control is used to confine daemon. Note that in contrast to other access control implementations that are typically enforced from kernel-space (e.g. DAC or MAC), self-confinement is imposed from the user-space daemon itself and hence should not be considered as a full confinement strategy, but instead should be viewed as an additional layer of security.

--user: Causes ovsdb-server to run as a different user specified in "user:group", thus dropping most of the root privileges. Short forms "user" and ":group" are also allowed, with current user or group are assumed respectively. Only daemons started by the root user accepts this argument.

: On Linux, daemons will be granted CAP_IPC_LOCK and CAP_NET_BIND_SERVICES before dropping root privileges. Daemons that interact with a datapath, such as ovs-vswitchd, will be granted three additional capabilities, namely CAP_NET_ADMIN, CAP_NET_BROADCAST and CAP_NET_RAW. The capability change will apply even if the new user is root.

Logging Options

-v[spec]

--verbose=[spec]

Sets logging levels. Without any spec, sets the log level for every module and destination to dbg. Otherwise, spec is a list of words separated by spaces or commas or colons, up to one from each category below:

•: A valid module name, as displayed by the vlog/list command on ovs-appctl(8), limits the log level change to the specified module.

•: syslog, console, or file, to limit the log level change to only to the system log, to the console, or to a file, respectively. (If --detach is specified, ovsdb-server closes its standard file descriptors, so logging to the console will have no effect.)

•: off, emer, err, warn, info, or dbg, to control the log level. Messages of the given severity or higher will be logged, and messages of lower severity will be filtered out. off filters out all messages. See ovs-appctl(8) for a definition of each log level.

: Case is not significant within spec.

: Regardless of the log levels set for file, logging to a file will not take place unless --log-file is also specified (see below).

: For compatibility with older versions of OVS, any is accepted as a word but has no effect.

-v

--verbose: Sets the maximum logging verbosity level, equivalent to --verbose=dbg.

-vPATTERN:destination:pattern

--verbose=PATTERN:destination:pattern: Sets the log pattern for destination to pattern. Refer to ovs-appctl(8) for a description of the valid syntax for pattern.

-vFACILITY:facility

--verbose=FACILITY:facility: Sets the RFC5424 facility of the log message. facility can be one of kern, user, mail, daemon, auth, syslog, lpr, news, uucp, clock, ftp, ntp, audit, alert, clock2, local0, local1, local2, local3, local4, local5, local6 or local7. If this option is not specified, daemon is used as the default for the local system syslog and local0 is used while sending a message to the target provided via the --syslog-target option.

--log-file[=file]: Enables logging to a file. If file is specified, then it is used as the exact name for the log file. The default log file name used if file is omitted is /var/log/openvswitch/ovsdb-server.log.

--syslog-target=host:port: Send syslog messages to UDP port on host, in addition to the system syslog. The host must be a numerical IP address, not a hostname.

--syslog-method=method

Specify method how syslog messages should be sent to syslog daemon. Following forms are supported:

•: libc, use libc syslog() function. Downside of using this options is that libc adds fixed prefix to every message before it is actually sent to the syslog daemon over /dev/log UNIX domain socket.

•: unix:file, use UNIX domain socket directly. It is possible to specify arbitrary message format with this option. However, rsyslogd 8.9 and older versions use hard coded parser function anyway that limits UNIX domain socket use. If you want to use arbitrary message format with older rsyslogd versions, then use UDP socket to localhost IP address instead.

•: udp:ip:port, use UDP socket. With this method it is possible to use arbitrary message format also with older rsyslogd. When sending syslog messages over UDP socket extra precaution needs to be taken into account, for example, syslog daemon needs to be configured to listen on the specified UDP port, accidental iptables rules could be interfering with local syslog traffic and there are some security considerations that apply to UDP sockets, but do not apply to UNIX domain sockets.

•: null, discards all messages logged to syslog.

: The default is taken from the OVS_SYSLOG_METHOD environment variable; if it is unset, the default is libc.

Active-Backup Options

These options support the ovsdb-server active-backup service model and database replication. These options apply only to databases in the format used for standalone and active-backup databases, which is the database format created by ovsdb-tool create. By default, when it serves a database in this format, ovsdb-server runs as a standalone server. These options can configure it for active-backup use:

•: Use --sync-from=server to start the server in the backup role, replicating data from server. When ovsdb-server is running as a backup server, it rejects all transactions that can modify the database content, including lock commands. The same form can be used to configure the local database as a replica of server.

•: Use --sync-from=server --active to start the server in the active role, but prepared to switch to the backup role in which it would replicate data from server. When ovsdb-server runs in active mode, it allows all transactions, including those that modify the database.

At runtime, management commands can change a server's role and otherwise manage active-backup features. See Active-Backup Commands, below, for more information.

--sync-from=server: Sets up ovsdb-server to synchronize its databases with the databases in server, which must be an active connection method in one of the forms documented in ovsdb-client(1). Every transaction committed by server will be replicated to ovsdb-server. This option makes ovsdb-server start as a backup server; add --active to make it start as an active server.

--sync-exclude-tables=db:table[,db:table]...: Causes the specified tables to be excluded from replication.

--active: By default, --sync-from makes ovsdb-server start up as a backup for server. With --active, however, ovsdb-server starts as an active server. Use this option to allow the syncing options to be specified using command line options, yet start the server, as the default, active server. To switch the running server to backup mode, use ovs-appctl(1) to execute the ovsdb-server/connect-active-ovsdb-server command.

These options are mutually exclusive with the --config-file.

Public Key Infrastructure Options

The options described below for configuring the SSL public key infrastructure accept a special syntax for obtaining their configuration from the database. If any of these options is given db:db,table,column as its argument, then the actual file name is read from the specified column in table within the db database. The column must have type string or set of strings. The first nonempty string in the table is taken as the file name. (This means that ordinarily there should be at most one row in table.)

-p privkey.pem

--private-key=privkey.pem: Specifies a PEM file containing the private key used as ovsdb-server's identity for outgoing SSL/TLS connections.

-c cert.pem

--certificate=cert.pem: Specifies a PEM file containing a certificate that certifies the private key specified on -p or --private-key to be trustworthy. The certificate must be signed by the certificate authority (CA) that the peer in SSL/TLS connections will use to verify it.

-C cacert.pem

--ca-cert=cacert.pem: Specifies a PEM file containing the CA certificate that ovsdb-server should use to verify certificates presented to it by SSL/TLS peers. (This may be the same certificate that SSL/TLS peers use to verify the certificate specified on -c or --certificate, or it may be a different one, depending on the PKI design in use.)

-C none

--ca-cert=none: Disables verification of certificates presented by SSL/TLS peers. This introduces a security risk, because it means that certificates cannot be verified to be those of known trusted hosts.

--ssl-server-name=servername: Specifies the server name to use for TLS Server Name Indication (SNI). By default, the hostname from the connection string is used for SNI. This option allows overriding the SNI hostname, which is useful when connecting through proxies or service meshes where the connection endpoint differs from the intended server name.

--bootstrap-ca-cert=cacert.pem: When cacert.pem exists, this option has the same effect as -C or --ca-cert. If it does not exist, then ovsdb-server will attempt to obtain the CA certificate from the SSL/TLS peer on its first SSL/TLS connection and save it to the named PEM file. If it is successful, it will immediately drop the connection and reconnect, and from then on all SSL/TLS connections must be authenticated by a certificate signed by the CA certificate thus obtained.

: This option exposes the SSL/TLS connection to a man-in-the-middle attack obtaining the initial CA certificate, but it may be useful for bootstrapping.

: This option is only useful if the SSL/TLS peer sends its CA certificate as part of the SSL/TLS certificate chain. SSL/TLS protocols do not require the server to send the CA certificate.

: This option is mutually exclusive with -C and --ca-cert.

--peer-ca-cert=peer-cacert.pem: Specifies a PEM file that contains one or more additional certificates to send to SSL/TLS peers. peer-cacert.pem should be the CA certificate used to sign ovsdb-server's own certificate, that is, the certificate specified on -c or --certificate. If ovsdb-server's certificate is self-signed, then --certificate and --peer-ca-cert should specify the same file.

: This option is not useful in normal operation, because the SSL/TLS peer must already have the CA certificate for the peer to have any confidence in ovsdb-server's identity. However, this offers a way for a new installation to bootstrap the CA certificate on its first SSL/TLS connection.

SSL Connection Options

--ssl-protocols=protocols: Specifies a range or a comma- or space-delimited list of the SSL/TLS protocols ovsdb-server will enable for SSL/TLS connections. Supported protocols include TLSv1.2 and TLSv1.3. Ranges can be provided in a form of two protocol names separated with a dash, or as a single protocol name with a plus sign. For example, use TLSv1.2-TLSv1.3 to allow TLSv1.2 and TLSv1.3. Use TLSv1.2+ to allow TLSv1.2 and any later protocol. The option accepts a list of protocols or exactly one range. The range is a preferred way of specifying protocols and the option always behaves as if the range between the minimum and the maximum specified version is provided, i.e., if the option is set to TLSv1.X,TLSv1.(X+2), the TLSv1.(X+1) will also be enabled as if it was a range. Regardless of order, the highest protocol supported by both sides will be chosen when making the connection. The default when this option is omitted is TLSv1.2 or later.

--ssl-ciphers=ciphers: Specifies, in OpenSSL cipher string format, the ciphers ovsdb-server will support for SSL/TLS connections with TLSv1.2. The default when this option is omitted is DEFAULT:@SECLEVEL=2.

--ssl-ciphersuites=ciphersuites: Specifies, in OpenSSL ciphersuite string format, the ciphersuites ovsdb-server will support for SSL/TLS connections with TLSv1.3 and later. Default value from OpenSSL will be used when this option is omitted.

Other Options

--unixctl=socket: Sets the name of the control socket on which ovsdb-server listens for runtime management commands (see RUNTIME MANAGEMENT COMMANDS, below). If socket does not begin with /, it is interpreted as relative to /run/openvswitch. If --unixctl is not used at all, the default socket is /run/openvswitch/ovsdb-server.pid.ctl, where pid is ovsdb-server's process ID.

: Specifying none for socket disables the control socket feature.

--record[=directory]: Sets the process in "recording" mode, in which it will record all the connections, data from streams (Unix domain and network sockets) and some other important necessary bits, so they could be replayed later. Recorded data is stored in replay files in specified directory. If directory does not begin with /, it is interpreted as relative to /run/openvswitch. If directory is not specified, /run/openvswitch will be used.

--replay[=directory]: Sets the process in "replay" mode, in which it will read information about connections, data from streams (Unix domain and network sockets) and some other necessary bits directly from replay files instead of using real sockets. Replay files from the directory will be used. If directory does not begin with /, it is interpreted as relative to /run/openvswitch. If directory is not specified, /run/openvswitch will be used.

-h

--help: Prints a brief help message to the console.

-V

--version: Prints version information to the console.

Runtime management commands

ovs-appctl(8) can send commands to a running ovsdb-server process. The currently supported commands are described below.

ovsdb-server Commands

These commands are specific to ovsdb-server.

exit: Causes ovsdb-server to gracefully terminate.

ovsdb-server/compact [db]: Compacts database db in-place. If db is not specified, compacts every database in-place. A database is also compacted automatically when a transaction is logged if it is over 2 times as large as its previous compacted size (and at least 10 MB), but not before 100 commits have been added or 10 minutes have elapsed since the last compaction. It will also be compacted automatically after 24 hours since the last compaction if 100 commits were added regardless of its size.

ovsdb-server/memory-trim-on-compaction on|off: If this option is on, ovsdb-server will try to reclaim all unused heap memory back to the system after each successful database compaction to reduce the memory consumption of the process. off by default.

ovsdb-server/reconnect: Makes ovsdb-server drop all of the JSON-RPC connections to database clients and reconnect.

: This command might be useful for debugging issues with database clients.

ovsdb-server/add-remote remote: Adds a remote, as if --remote=remote had been specified on the ovsdb-server command line. (If remote is already a remote, this command succeeds without changing the configuration.)

: Mutually exclusive with the --config-file option.

ovsdb-server/remove-remote remote: Removes the specified remote from the configuration, failing with an error if remote is not configured as a remote. This command only works with remotes that were named on --remote or ovsdb-server/add-remote, that is, it will not remove remotes added indirectly because they were read from the database by configuring a db:db,table,column remote. (You can remove a database source with ovsdb-server/remove-remote db:db,table,column, but not individual remotes found indirectly through the database.)

: Mutually exclusive with the --config-file option.

ovsdb-server/list-remotes: Outputs a list of the currently configured remotes named on --remote or ovsdb-server/add-remote, that is, it does not list remotes added indirectly because they were read from the database by configuring a db:db,table,column remote.

ovsdb-server/add-db database: Adds the database to the running ovsdb-server. database could be a database file or a relay description in the following format: relay:schema_name:remote. The database file must already have been created and initialized using, for example, ovsdb-tool create.

: Mutually exclusive with the --config-file option.

ovsdb-server/remove-db database: Removes database from the running ovsdb-server. database must be a database name as listed by ovsdb-server/list-dbs.

: If a remote has been configured that points to the specified database (e.g. --remote=db:database,... on the command line), then it will be disabled until another database with the same name is added again (with ovsdb-server/add-db).

: Any public key infrastructure options specified through this database (e.g. --private-key=db:database,... on the command line) will be disabled until another database with the same name is added again (with ovsdb-server/add-db).

: Mutually exclusive with the --config-file option.

ovsdb-server/list-dbs: Outputs a list of the currently configured databases added either through the command line or through the ovsdb-server/add-db command.

ovsdb-server/tlog-set database:table on|off: Enables or disables logging of all operations executed on the specified database and table. Logs are generated at INFO level and are rate limtied.

ovsdb-server/tlog-list: Displays the logging state for all currently configured databases and tables.

Active-Backup Commands

These commands query and update the role of ovsdb-server within an active-backup pair of servers. See Active-Backup Options, above, and Active-Backup Database Service Model in ovsdb(7) for more information.

All Active-Backup Commands that change the state of ovsdb-server are mutually exclusive with the --config-file option.

ovsdb-server/set-active-ovsdb-server server: Sets the active server from which ovsdb-server connects through ovsdb-server/connect-active-ovsdb-server. This overrides the --sync-from command-line option.

ovsdb-server/get-active-ovsdb-server: Gets the active server from which ovsdb-server is currently synchronizing its databases.

ovsdb-server/connect-active-ovsdb-server: Switches the server to a backup role. The server starts synchronizing its databases with the active server specified by ovsdb-server/set-active-ovsdb-server (or the --sync-from command-line option) and closes all existing client connections, which requires clients to reconnect.

ovsdb-server/disconnect-active-ovsdb-server: Switches the server to an active role. The server stops synchronizing its databases with an active server and closes all existing client connections, which requires clients to reconnect.

ovsdb-server/set-active-ovsdb-server-probe-interval probe interval: Sets the probe interval (in milli seconds) for the connection to active server.

ovsdb-server/set-sync-exclude-tables db:table[,db:table]...: Sets the table within db that will be excluded from synchronization. This overrides the --sync-exclude-tables command-line option.

ovsdb-server/get-sync-exclude-tables: Gets the tables that are currently excluded from synchronization.

ovsdb-server/sync-status: Prints a summary of replication run time information. The state information is always provided, indicating whether the server is running in the active or the backup mode. For all databases with active-backup service model, replication connection status, which can be either connecting, replicating or error, are shown. When the connection is in replicating state, further output shows the tables that are currently excluded from replication.

Cluster Commands

These commands support the ovsdb-server clustered service model. They apply only to databases in the format used for clustered databases, which is the database format created by ovsdb-tool create-cluster and ovsdb-tool join-cluster.

cluster/cid db: Prints the cluster ID for db, which is a UUID that identifies the cluster. If db is a database newly created by ovsdb-tool cluster-join that has not yet successfully joined its cluster, and --cid was not specified on the cluster-join command line, then this command will report an error because the cluster ID is not yet known.

cluster/sid db: Prints the server ID for db, which is a UUID that identifies this server within the cluster.

cluster/status db: Prints this server's status within the cluster and the status of its connections to other servers in the cluster.

cluster/leave db: This command starts the server gracefully removing itself from its cluster. At least one server must remain, and the cluster must be healthy, that is, over half of the cluster's servers must be up.

: When the server successfully leaves the cluster, it stops serving db, as if ovsdb-server/remove-db db had been executed.

: Use ovsdb-client wait (see ovsdb-client(1)) to wait until the server has left the cluster.

: Once a server leaves a cluster, it may never rejoin it. Instead, create a new server and join it to the cluster.

: Note that removing the server from the cluster alters the total size of the cluster. For example, if you remove two servers from a three server cluster, then the "cluster" becomes a single functioning server. This does not result in a three server cluster that lacks quorum.

cluster/kick db server: Start graceful removal of server from db's cluster, like cluster/leave, except that it can remove any server, not just this one.

: server may be a server ID, as printed by cluster/sid, or the server's local network address as passed to ovsdb-tool's create-cluster or join-cluster command. Use cluster/status to see a list of cluster members.

cluster/change-election-timer db time: Change the leader election timeout base value of the cluster, in milliseconds.

: Leader election will be initiated by a follower if there is no heartbeat received from the leader within this time plus a random time within 1 second.

: The default value is 1000, if not changed with this command. This command can be used to adjust the value when necessary, according to the expected load and response time of the servers.

: This command must be executed on the leader. It initiates the change to the cluster. To see if the change takes effect (committed), use cluster/status to show the current setting. Once a change is committed, it persists at server restarts.

cluster/set-backlog-threshold db n_msgs n_bytes: Sets the backlog limits for db's RAFT connections to a maximum of n_msgs messages or n_bytes bytes. If the backlog on one of the connections reaches the limit, it will be disconnected (and re-established). Values are checked only if the backlog contains more than 50 messages.

Vlog commands

These commands manage ovsdb-server's logging settings.

vlog/set [spec]

•: A valid module name, as displayed by the vlog/list command on ovs-appctl(8), limits the log level change to the specified module.

•: syslog, console, or file, to limit the log level change to only to the system log, to the console, or to a file, respectively.

•: off, emer, err, warn, info, or dbg, to control the log level. Messages of the given severity or higher will be logged, and messages of lower severity will be filtered out. off filters out all messages. See ovs-appctl(8) for a definition of each log level.

: Case is not significant within spec.

: Regardless of the log levels set for file, logging to a file will not take place unless ovsdb-server was invoked with the --log-file option.

: For compatibility with older versions of OVS, any is accepted as a word but has no effect.

vlog/set PATTERN:destination:pattern: Sets the log pattern for destination to pattern. Refer to ovs-appctl(8) for a description of the valid syntax for pattern.

vlog/list: Lists the supported logging modules and their current levels.

vlog/list-pattern: Lists logging patterns used for each destination.

vlog/close: Causes ovsdb-server to close its log file, if it is open. (Use vlog/reopen to reopen it later.)

vlog/reopen: Causes ovsdb-server to close its log file, if it is open, and then reopen it. (This is useful after rotating log files, to cause a new log file to be used.)

: This has no effect unless ovsdb-server was invoked with the --log-file option.

vlog/disable-rate-limit [module]...

vlog/enable-rate-limit [module]...: By default, ovsdb-server limits the rate at which certain messages can be logged. When a message would appear more frequently than the limit, it is suppressed. This saves disk space, makes logs easier to read, and speeds up execution, but occasionally troubleshooting requires more detail. Therefore, vlog/disable-rate-limit allows rate limits to be disabled at the level of an individual log module. Specify one or more module names, as displayed by the vlog/list command. Specifying either no module names at all or the keyword any disables rate limits for every log module.

: The vlog/enable-rate-limit command, whose syntax is the same as vlog/disable-rate-limit, can be used to re-enable a rate limit that was previously disabled.

Memory commands

These commands report memory usage.

memory/show: Displays some basic statistics about ovsdb-server's memory usage. ovsdb-server also logs this information soon after startup and periodically as its memory consumption grows.

Coverage commands

These commands manage ovsdb-server's ``coverage counters,'' which count the number of times particular events occur during a daemon's runtime. In addition to these commands, ovsdb-server automatically logs coverage counter values, at INFO level, when it detects that the daemon's main loop takes unusually long to run.

Coverage counters are useful mainly for performance analysis and debugging.

coverage/show: Displays the averaged per-second rates for the last few seconds, the last minute and the last hour, and the total counts of all of the coverage counters.

coverage/read-counter counter: Displays the total count for the given coverage counter.

Releases

8 releases since Debian 7 (Wheezy); the text changed 7 times.

7
8
9
10
11
12
13
Arch

--active since Debian 9 (Stretch); --config-file since Debian 13 (Trixie); --no-self-confinement since Debian 9 (Stretch); --peer-ca-cert since Debian 9 (Stretch); --record since Debian 12 (Bookworm); --replay since Debian 12 (Bookworm); --ssl-ciphers since Debian 10 (Buster); --ssl-ciphersuites since Debian 13 (Trixie); --ssl-protocols since Debian 10 (Buster); --ssl-server-name since Arch Linux 2026-11-01; --sync-exclude-tables since Debian 9 (Stretch); --sync-from since Debian 9 (Stretch); --syslog-method since Debian 9 (Stretch); --syslog-target since Debian 8 (Jessie); --user since Debian 9 (Stretch).

--service until Debian 13 (Trixie); --service-monitor until Debian 13 (Trixie).