gnugk1
The gnu gatekeeper
Usage
gnugk [-hdrt]
[-c
filename]
[-s
section]
[-l
n]
[-b
n]
[-u
name]
[-d
name]
[-rr]
[-o
filename]
[--pid
filename]
[--core
n]
[--mlock]
[--strict]
Overview
The GNU Gatekeeper is an open-source project that implements a H.323 gatekeeper. A H.323 gatekeeper controls all H.323 clients in its zone. It allows you, among other things, to register devices, make calls, perform AAA (Authentication, Authorization and Auditing), manage configurations at runtime and traverse NAT.
Options
The behavior of the gatekeeper is determined through command line options and the configuration file. Some command line options may override settings found in the configuration file. For example, the option -l overrides the setting “TimeToLive” in the configuration file. Almost every option has a short and a long format, e.g., -c is the same as --config.
-
-h --help -
Show all available options and quit the program.
-
-c --config filename -
Specify the configuration file to use.
-
--strict -
Strict configuration check (don't start with config errors)
-
-s --section section -
Specify which main section to use in the configuration file. The default is [Gatekeeper::Main].
-
-l --timetolive n -
Specify the time-to-live timer (in seconds) for endpoint registration. This overrides the setting “TimeToLive” in the configuration file. A detailed explanation can be found in the manual.
-
-b --bandwidth n -
Specify the total bandwidth available for the gatekeeper. Without specifying this option, bandwidth management is disabled by default.
-
--pid filename -
Specify the pid file. Only valid for Unix version.
-
-u --user name -
Run the gatekeeper process as this user. Only valid for Unix versions.
-
--core n -
(Unix only) Enable writing core dump files when the application crashes. A core dump file will not exceed n bytes in size. A special constant “unlimited” may also be specified.
-
--mlock -
(Unix only) Lock GnuGk into memory to prevent it being swaped out.
Gatekeeper Mode
The options in this subsection override the settings in the [RoutedMode] section of the configuration file.
-
-d --direct -
Use direct endpoint call signaling.
-
-r --routed -
Use gatekeeper routed call signaling.
-
-rr --h245routed -
Use gatekeeper routed call signaling and H.245 control channel.
Debug Information
-
-o --output filename -
Write trace log to the specified file.
-
-t --trace -
Set trace verbosity. The more
-tyou add, the more verbose to output. For example, use-tttttto set the trace level to 5.
Files
/etc/gatekeeper.ini
Releases
6 releases since Debian 4.0 (Etch); the text changed 4 times.
--bandwidth since Debian 7 (Wheezy);
--config since Debian 7 (Wheezy);
--core since Debian 7 (Wheezy);
--help since Debian 7 (Wheezy);
--mlock since Debian 8 (Jessie);
--pid since Debian 7 (Wheezy);
--section since Debian 7 (Wheezy);
--strict since Debian 8 (Jessie);
--timetolive since Debian 7 (Wheezy);
--user since Debian 7 (Wheezy);
-b since Debian 7 (Wheezy);
-c since Debian 7 (Wheezy);
-h since Debian 7 (Wheezy);
-l since Debian 7 (Wheezy);
-s since Debian 7 (Wheezy);
-u since Debian 7 (Wheezy).
--interface until Debian 7 (Wheezy);
-i until Debian 7 (Wheezy).