giscience7

Usage

Overview

For detailed information please refer to the GIRAFFE pipeline user manual.

It is available at http://www.eso.org/pipelines.

Options

--remove-bias <bool>

Enable bias removal (bool; default: True). The full name of this option for the EsoRex configuration file is giraffe.biasremoval.remove [default = True].

--bsremove-method <str>

Bias removal method (str; default: ´PROFILE´). The full name of this option for the EsoRex configuration file is giraffe.biasremoval.method [default = PROFILE].

--bsremove-areas <str>

Bias areas to use (Xl0:Xr0:Yl0:Yr0, ... ,Xln:Xrn:Yln:Yrn) (str; default: ´5:40:0:4095´). The full name of this option for the EsoRex configuration file is giraffe.biasremoval.areas [default = 5:40:0:4095].

--bsremove-sigma <float>

Sigma Clipping: sigma threshold factor (float; default: 2.5). The full name of this option for the EsoRex configuration file is giraffe.biasremoval.sigma [default = 2.5].

--bsremove-niter <int>

Sigma Clipping: maximum number of iterations (int; default: 5). The full name of this option for the EsoRex configuration file is giraffe.biasremoval.iterations [default = 5].

--bsremove-mfrac <float>

Sigma Clipping: minimum fraction of points accepted/total [0.0..1.0] (float; default: 0.8). The full name of this option for the EsoRex configuration file is giraffe.biasremoval.fraction [default = 0.8].

--bsremove-xorder <int>

Order of X polynomial fit (CURVE method only) (int; default: 1). The full name of this option for the EsoRex configuration file is giraffe.biasremoval.xorder [default = 1].

--bsremove-yorder <int>

Order of Y polynomial fit (CURVE method only) (int; default: 1). The full name of this option for the EsoRex configuration file is giraffe.biasremoval.yorder [default = 1].

--bsremove-xstep <int>

Sampling step along X (CURVE method only) (int; default: 1). The full name of this option for the EsoRex configuration file is giraffe.biasremoval.xstep [default = 1].

--bsremove-ystep <int>

Sampling step along Y (CURVE method only) (int; default: 1). The full name of this option for the EsoRex configuration file is giraffe.biasremoval.ystep [default = 1].

--extr-method <str>

Extraction method: ´SUM´, ´HORNE´ or ´OPTIMAL´ (str; default: ´SUM´). The full name of this option for the EsoRex configuration file is giraffe.extraction.method [default = SUM].

--extr-ron <float>

New bias sigma (RON) value for bias and dark corrected image (float; default: -1.0). The full name of this option for the EsoRex configuration file is giraffe.extraction.ron [default = -1.0].

--extr-psfmodel <str>

PSF profile model: `psfexp´, `psfexp2´ (str; default: ´psfexp2´). The full name of this option for the EsoRex configuration file is giraffe.extraction.psf.model [default = psfexp2].

--extr-psfsigma <float>

Sigma clippging threshold used for rejecting data points during PSF fitting (Horne´s sigma). It is used to reject bad pixels and cosmics. (float; default: 7.0). The full name of this option for the EsoRex configuration file is giraffe.extraction.psf.sigma [default = 7.0].

--extr-psfniter <int>

Maximum number of iterations used for fitting the PSF profile. (int; default: 2). The full name of this option for the EsoRex configuration file is giraffe.extraction.psf.iterations [default = 2].

--extr-hewidth <int>

Horne extraction method: Number of extra pixels added to the fiber half-width. (int; default: 2). The full name of this option for the EsoRex configuration file is giraffe.extraction.horne.extrawidth [default = 2].

--extr-hmingood <int>

Horne extraction method: Minimum number of points used for the profile fit. It sets the lower limit of data points for the pixel rejection. (int; default: 3). The full name of this option for the EsoRex configuration file is giraffe.extraction.horne.mingood [default = 3].

--extr-omfrac <float>

Optimal extraction method: Minimum fraction of the data points used for fitting the fiber profiles. It sets the lower limit for the pixel rejection. (float; default: 0.9). The full name of this option for the EsoRex configuration file is giraffe.extraction.optimal.fraction [default = 0.9].

--extr-owfactor <float>

Optimal extraction method: Factor by which the fiber PSF half width is multiplied. Adjacent spectra within this area are assumed to affect the spectrum being extracted. (float; default: 3.0). The full name of this option for the EsoRex configuration file is giraffe.extraction.optimal.wfactor [default = 3.0].

--extr-obkgorder <int>

Optimal extraction method: Order of the polynomial background model, which is fitted for each wavelength bin along the spatial direction. (int; default: 2). The full name of this option for the EsoRex configuration file is giraffe.extraction.optimal.bkgorder [default = 2].

--flat-apply <bool>

Controls the flat field correction. (bool; default: True). The full name of this option for the EsoRex configuration file is giraffe.flat.apply [default = True].

--transmission-apply <bool>

Controls the fiber to fiber transmission correction. (bool; default: False). The full name of this option for the EsoRex configuration file is giraffe.flat.transmission [default = False].

--rbin-method <str>

Method to use : `linear´ or `spline´ (str; default: ´linear´). The full name of this option for the EsoRex configuration file is giraffe.rebinning.method [default = linear].

--rbin-xresid <bool>

Use x residuals during rebinning? `true´/`false´ (bool; default: True). The full name of this option for the EsoRex configuration file is giraffe.rebinning.xresiduals [default = True].

--rbin-lstep <float>

Lambda step size, only used if scaling method is ´linear´ (float; default: 0.005). The full name of this option for the EsoRex configuration file is giraffe.rebinning.lstep [default = 0.005].

--rbin-scmethod <str>

Scaling method: `log´ or `linear´ (str; default: ´linear´). The full name of this option for the EsoRex configuration file is giraffe.rebinning.scalemethod [default = linear].

--rbin-size <int>

Size of output rebinned spectra, 0 means calculate size based on wavelength range and lambda stepsize (int; default: 0). The full name of this option for the EsoRex configuration file is giraffe.rebinning.size [default = 0].

--rbin-range <str>

Rebinning range: `setup´ or `common´ (str; default: ´setup´). The full name of this option for the EsoRex configuration file is giraffe.rebinning.range [default = setup].

--siwc-apply <bool>

Enable simultaneous wavelength calibration correction. (bool; default: True). The full name of this option for the EsoRex configuration file is giraffe.siwc.apply [default = True].

--scal-cniter <int>

Slit geometry calibration maximum number of iterations. (int; default: 1). The full name of this option for the EsoRex configuration file is giraffe.sgcalibration.iterations [default = 1].

--scal-zmax <float>

Maximum allowed pixel value. To be effective it must be larger than 0. (float; default: 10000.0). The full name of this option for the EsoRex configuration file is giraffe.sgcalibration.zmax [default = 10000.0].

--scal-cstep <float>

Cross-correlation step. (float; default: -0.005). The full name of this option for the EsoRex configuration file is giraffe.sgcalibration.cc.step [default = -0.005].

--scal-cdomain <str>

Restricts the cross-correlation to the given domain. (str; default: ´0.,0.´). The full name of this option for the EsoRex configuration file is giraffe.sgcalibration.cc.domain [default = 0.,0.].

--scal-rvlimits <str>

Delta RV limits of the cross-correlation window in km/s. (str; default: ´-200.,200.´). The full name of this option for the EsoRex configuration file is giraffe.sgcalibration.rv.limits [default = -200.,200.].

--scal-rvniter <int>

Maximum number of iterations used for the RV determination. (int; default: 3). The full name of this option for the EsoRex configuration file is giraffe.sgcalibration.rv.iterations [default = 3].

--scal-rvwfactor <float>

Data window width factor. The FWHM times this value determines the window width. (float; default: 1.5). The full name of this option for the EsoRex configuration file is giraffe.sgcalibration.rv.wfactor [default = 1.5].

--scal-pfniter <int>

Peak model fit maximum number of iterations. (int; default: 50). The full name of this option for the EsoRex configuration file is giraffe.sgcalibration.peak.iterations [default = 50].

--scal-pfntest <int>

Cross-correlation peak fit maximum number of tests (int; default: 7). The full name of this option for the EsoRex configuration file is giraffe.sgcalibration.peak.tests [default = 7].

--scal-pfdchisq <float>

Cross-correlation peak fit minimum chi-square difference. (float; default: 0.0001). The full name of this option for the EsoRex configuration file is giraffe.sgcalibration.peak.dchisquare [default = 0.0001].

--recon-min <float>

Minimum wavelength for image reconstruction (float; default: 0.0). The full name of this option for the EsoRex configuration file is giraffe.fov.range.minimum [default = 0.0].

--recon-max <float>

Maximum wavelength for image reconstruction (float; default: 0.0). The full name of this option for the EsoRex configuration file is giraffe.fov.range.maximum [default = 0.0].

--recon-cube <bool>

Turns data cube creation on and off (bool; default: True). The full name of this option for the EsoRex configuration file is giraffe.fov.cube [default = True].

--recon-format <str>

Selects the file format for cubes (str; default: ´single´). The full name of this option for the EsoRex configuration file is giraffe.fov.cube.format [default = single].

--generate-SDP-format <bool>

TRUE if additional files should be generated in Science Data Product (SDP) format. (bool; default: False). The full name of this option for the EsoRex configuration file is giraffe.sdp.format.generate [default = False].

--dummy-association-keys <int>

Sets the number of dummy (empty) ASSONi, ASSOCi and ASSOMi keywords to create. (int; default: 0). The full name of this option for the EsoRex configuration file is giraffe.sdp.nassoc.keys [default = 0].

Note that it is possible to create a configuration file containing these options, along with suitable default values. Please refer to the details provided by the 'esorex --help' command.

Version

giscience 2.16.10