gimasterflat7

Usage

Overview

For detailed information please refer to the GIRAFFE pipeline user manual.

It is available at http://www.eso.org/pipelines.

Options

--fiber-splist <str>

Index list of spectra to use for localization (e.g. 2,10,30-40,55). (str; default: ´´). The full name of this option for the EsoRex configuration file is giraffe.fibers.spectra [default = ].

--fiber-nspec <int>

Number of spectra to localize. (int; default: 0). The full name of this option for the EsoRex configuration file is giraffe.fibers.nspectra [default = 0].

--remove-bias <bool>

Enable bias removal (bool; default: True). The full name of this option for the EsoRex configuration file is giraffe.biasremoval.remove [default = True].

--bsremove-method <str>

Bias removal method (str; default: ´PROFILE´). The full name of this option for the EsoRex configuration file is giraffe.biasremoval.method [default = PROFILE].

--bsremove-areas <str>

Bias areas to use (Xl0:Xr0:Yl0:Yr0, ... ,Xln:Xrn:Yln:Yrn) (str; default: ´5:40:0:4095´). The full name of this option for the EsoRex configuration file is giraffe.biasremoval.areas [default = 5:40:0:4095].

--bsremove-sigma <float>

Sigma Clipping: sigma threshold factor (float; default: 2.5). The full name of this option for the EsoRex configuration file is giraffe.biasremoval.sigma [default = 2.5].

--bsremove-niter <int>

Sigma Clipping: maximum number of iterations (int; default: 5). The full name of this option for the EsoRex configuration file is giraffe.biasremoval.iterations [default = 5].

--bsremove-mfrac <float>

Sigma Clipping: minimum fraction of points accepted/total [0.0..1.0] (float; default: 0.8). The full name of this option for the EsoRex configuration file is giraffe.biasremoval.fraction [default = 0.8].

--bsremove-xorder <int>

Order of X polynomial fit (CURVE method only) (int; default: 1). The full name of this option for the EsoRex configuration file is giraffe.biasremoval.xorder [default = 1].

--bsremove-yorder <int>

Order of Y polynomial fit (CURVE method only) (int; default: 1). The full name of this option for the EsoRex configuration file is giraffe.biasremoval.yorder [default = 1].

--bsremove-xstep <int>

Sampling step along X (CURVE method only) (int; default: 1). The full name of this option for the EsoRex configuration file is giraffe.biasremoval.xstep [default = 1].

--bsremove-ystep <int>

Sampling step along Y (CURVE method only) (int; default: 1). The full name of this option for the EsoRex configuration file is giraffe.biasremoval.ystep [default = 1].

--sloc-mode <str>

Localization mode: Use all spectra or the 5 SIWC spectra (str; default: ´all´). The full name of this option for the EsoRex configuration file is giraffe.localization.mode [default = all].

--sloc-start <int>

Bin along x-axis (int; default: -1). The full name of this option for the EsoRex configuration file is giraffe.localization.start [default = -1].

--sloc-retries <int>

Initial localization detection xbin retries. (int; default: 10). The full name of this option for the EsoRex configuration file is giraffe.localization.retries [default = 10].

--sloc-binsize <int>

Initial localization detection xbin size. (int; default: -1). The full name of this option for the EsoRex configuration file is giraffe.localization.binsize [default = -1].

--sloc-ewidth <float>

Localization detection extra width. (float; default: 1.0). The full name of this option for the EsoRex configuration file is giraffe.localization.ewidth [default = 1.0].

--sloc-ywidth <int>

Full width [pxl] of the equilizing filter (distance between two adjacent fibers). (int; default: -1). The full name of this option for the EsoRex configuration file is giraffe.localization.ywidth [default = -1].

--sloc-center <str>

Method used for mask center computation. (str; default: ´centroid´). The full name of this option for the EsoRex configuration file is giraffe.localization.center [default = centroid].

--sloc-norm <bool>

Enable spectrum normalization along the dispersion axis. (bool; default: False). The full name of this option for the EsoRex configuration file is giraffe.localization.normalize [default = False].

--sloc-noise <float>

Threshold multiplier. (float; default: 7.0). The full name of this option for the EsoRex configuration file is giraffe.localization.noise [default = 7.0].

--sloc-threshold <str>

Selects thresholding algorithm: local, row or global (str; default: ´local´). The full name of this option for the EsoRex configuration file is giraffe.localization.threshold [default = local].

--sloc-ron <float>

New bias sigma (RON) value for dark subtraction (float; default: -1.0). The full name of this option for the EsoRex configuration file is giraffe.localization.ron [default = -1.0].

--sloc-yorder <int>

Order of Chebyshev polynomial fit. (int; default: 4). The full name of this option for the EsoRex configuration file is giraffe.localization.yorder [default = 4].

--sloc-worder <int>

Order of Chebyshev 2D polynomial fit. (int; default: 2). The full name of this option for the EsoRex configuration file is giraffe.localization.worder [default = 2].

--sloc-sigma <float>

Localization clipping: sigma threshold factor (float; default: 2.5). The full name of this option for the EsoRex configuration file is giraffe.localization.sigma [default = 2.5].

--sloc-niter <int>

Localization clipping: number of iterations (int; default: 5). The full name of this option for the EsoRex configuration file is giraffe.localization.iterations [default = 5].

--sloc-mfrac <float>

Localization clipping: minimum fraction of points accepted/total. (float; default: 0.9). The full name of this option for the EsoRex configuration file is giraffe.localization.fraction [default = 0.9].

--psf-model <str>

PSF profile model: `psfexp´, `psfexp2´ (str; default: ´psfexp2´). The full name of this option for the EsoRex configuration file is giraffe.psf.model [default = psfexp2].

--psf-norm <bool>

Use normalized pixel values. (bool; default: False). The full name of this option for the EsoRex configuration file is giraffe.psf.normalize [default = False].

--psf-binsize <int>

Size of bin along dispersion axis (int; default: 64). The full name of this option for the EsoRex configuration file is giraffe.psf.binsize [default = 64].

--psf-maxwidth <float>

Maximum width of the PSF profile. (float; default: 16.0). The full name of this option for the EsoRex configuration file is giraffe.psf.maxwidth [default = 16.0].

--psf-width <float>

Initial width of the PSF profile. (float; default: 0.0). The full name of this option for the EsoRex configuration file is giraffe.psf.width [default = 0.0].

--psf-exponent <float>

Exponent of the exponential PSF profile (will not be fitted if > 0). (float; default: -3.0). The full name of this option for the EsoRex configuration file is giraffe.psf.exponent [default = -3.0].

--psf-pfniter <int>

Maximum number of iterations used for the fit of the fiber PSF profile. (int; default: 120). The full name of this option for the EsoRex configuration file is giraffe.psf.profile.iterations [default = 120].

--psf-pfntest <int>

Maximum number of tests used for the fit of the fiber PSF profile (int; default: 7). The full name of this option for the EsoRex configuration file is giraffe.psf.profile.tests [default = 7].

--psf-pfdchisq <float>

Minimum chi-square difference used for the fit of the fiber PSF profile. (float; default: 0.001). The full name of this option for the EsoRex configuration file is giraffe.psf.profile.dchisquare [default = 0.001].

--psf-prmfit <bool>

2D fit of the PSF profile parameters using a Chebyshev polynomial model. (bool; default: False). The full name of this option for the EsoRex configuration file is giraffe.psf.parameters.fit [default = False].

--psf-yorder <int>

Order of Chebyshev polynomial fit. (int; default: 4). The full name of this option for the EsoRex configuration file is giraffe.psf.parameters.yorder [default = 4].

--psf-worder <int>

Order of Chebyshev 2D polynomial fit. (int; default: 4). The full name of this option for the EsoRex configuration file is giraffe.psf.parameters.worder [default = 4].

--psf-sigma <float>

PSF parameter fitting: sigma threshold factor (float; default: 3.5). The full name of this option for the EsoRex configuration file is giraffe.psf.parameters.sigma [default = 3.5].

--psf-niter <int>

PSF parameter fitting: number of iterations (int; default: 10). The full name of this option for the EsoRex configuration file is giraffe.psf.parameters.iterations [default = 10].

--psf-mfrac <float>

PSF parameter fitting: minimum fraction of points accepted/total. (float; default: 0.8). The full name of this option for the EsoRex configuration file is giraffe.psf.parameters.fraction [default = 0.8].

--extr-method <str>

Extraction method: ´SUM´, ´HORNE´ or ´OPTIMAL´ (str; default: ´SUM´). The full name of this option for the EsoRex configuration file is giraffe.extraction.method [default = SUM].

--extr-ron <float>

New bias sigma (RON) value for bias and dark corrected image (float; default: -1.0). The full name of this option for the EsoRex configuration file is giraffe.extraction.ron [default = -1.0].

--extr-psfmodel <str>

PSF profile model: `psfexp´, `psfexp2´ (str; default: ´psfexp2´). The full name of this option for the EsoRex configuration file is giraffe.extraction.psf.model [default = psfexp2].

--extr-psfsigma <float>

Sigma clippging threshold used for rejecting data points during PSF fitting (Horne´s sigma). It is used to reject bad pixels and cosmics. (float; default: 7.0). The full name of this option for the EsoRex configuration file is giraffe.extraction.psf.sigma [default = 7.0].

--extr-psfniter <int>

Maximum number of iterations used for fitting the PSF profile. (int; default: 2). The full name of this option for the EsoRex configuration file is giraffe.extraction.psf.iterations [default = 2].

--extr-hewidth <int>

Horne extraction method: Number of extra pixels added to the fiber half-width. (int; default: 2). The full name of this option for the EsoRex configuration file is giraffe.extraction.horne.extrawidth [default = 2].

--extr-hmingood <int>

Horne extraction method: Minimum number of points used for the profile fit. It sets the lower limit of data points for the pixel rejection. (int; default: 3). The full name of this option for the EsoRex configuration file is giraffe.extraction.horne.mingood [default = 3].

--extr-omfrac <float>

Optimal extraction method: Minimum fraction of the data points used for fitting the fiber profiles. It sets the lower limit for the pixel rejection. (float; default: 0.9). The full name of this option for the EsoRex configuration file is giraffe.extraction.optimal.fraction [default = 0.9].

--extr-owfactor <float>

Optimal extraction method: Factor by which the fiber PSF half width is multiplied. Adjacent spectra within this area are assumed to affect the spectrum being extracted. (float; default: 3.0). The full name of this option for the EsoRex configuration file is giraffe.extraction.optimal.wfactor [default = 3.0].

--extr-obkgorder <int>

Optimal extraction method: Order of the polynomial background model, which is fitted for each wavelength bin along the spatial direction. (int; default: 2). The full name of this option for the EsoRex configuration file is giraffe.extraction.optimal.bkgorder [default = 2].

--transmission <bool>

Controls the relative fiber transmission computation. (bool; default: True). The full name of this option for the EsoRex configuration file is giraffe.masterflat.transmission [default = True].

--slight <bool>

Controls the scattered light model computation. (bool; default: False). The full name of this option for the EsoRex configuration file is giraffe.masterflat.slight [default = False].

--slight-model <str>

Name of the scattered light model to use. (str; default: ´polynom´). The full name of this option for the EsoRex configuration file is giraffe.slight.model.name [default = polynom].

--slight-order <str>

Scattered light model fit X and Y order. (str; default: ´4,2´). The full name of this option for the EsoRex configuration file is giraffe.slight.model.order [default = 4,2].

--slight-xstep <int>

Interspectrum region sampling step along the dispersion direction. (int; default: 10). The full name of this option for the EsoRex configuration file is giraffe.slight.xstep [default = 10].

--slight-ystep <int>

Interspectrum region sampling step along the spatial direction. (int; default: 1). The full name of this option for the EsoRex configuration file is giraffe.slight.ystep [default = 1].

--slight-xslice <str>

Interspectrum region sampling step along the dispersion direction for a specific region. This overrides ´xstep´ for the given region. (str; default: ´none´). The full name of this option for the EsoRex configuration file is giraffe.slight.xslice [default = none].

--slight-ewidth <float>

Extra width [pixels] added to both sides of a spectrum trace. (float; default: 0.5). The full name of this option for the EsoRex configuration file is giraffe.slight.ewidth [default = 0.5].

--slight-iswidth <int>

Minimum width [pixels] required for interspectrum regions. (int; default: 2). The full name of this option for the EsoRex configuration file is giraffe.slight.iswidth [default = 2].

--slight-istrim <bool>

Turn off using the first and last interspectrum region. (bool; default: True). The full name of this option for the EsoRex configuration file is giraffe.slight.istrim [default = True].

--slight-phff <bool>

Use photometric flat field correction. (bool; default: False). The full name of this option for the EsoRex configuration file is giraffe.slight.phffcorrection [default = False].

--slight-remove <bool>

Remove scattered light from the input frame. (bool; default: False). The full name of this option for the EsoRex configuration file is giraffe.slight.remove [default = False].

Note that it is possible to create a configuration file containing these options, along with suitable default values. Please refer to the details provided by the 'esorex --help' command.

Version

gimasterflat 2.16.10