audial1x

Usage

Overview

The audial program generates touch tones suitable for dialing a North American telephone. audial can also recognize touch tones and produce the corresponding string.

Options

The following options may be used in either dial or recognition mode:

-audio servername

This option specifies the Network Audio System server on which the files should be played.

Options

The following options may be used in dial mode:

-volume 0-100

This option specifies the volume at which the data should be played as a percentage of the maximum possible volume. The default is 100 percent.

-spacing milliseconds

This option specifies the number of milliseconds to wait in between each digit. The default is 100.

-pause milliseconds

This option specifies the number of milliseconds to wait whenever a comma (,) is used in a dial string. The default is 400.

-duration milliseconds

This option specifies the duration of each tone in milliseconds. The default is 100.

Dialing string

The following characters may be used in a dialing string:

Any other characters are ignored.

Options

-recognize

Enables recognition mode. audial will attempt to recognize touch tones from the input device and output the corresponding character.

-microphone

Use microphone gain levels on the audio input device. If a microphone is plugged into the audio input jack, this option should be used.

-gain 0-100

This option specifies the input gain level. The default is 95.

-time seconds

This option specifies how long to attempt the recognition. The default is forever.

Environment

The following environment variables are used by audial:

AUDIOSERVER

This specifies the name of default audio server to contact if no name is explicitly given on the command line.

DISPLAY

This specifies the name of an X Window System display that should be assumed to also have a corresponding Network Audio System server.