tripplitesu (8)

This man page only documents the hardware-specific features of the tripplitesu driver. For information about the core driver, see nutupsdrv(8).

This driver supports the Tripp Lite SmartOnline family (via the serial port).

This driver supports the following optional settings in the ups.conf(5):

lowbatt=num

Set the low battery warning threshold in percent at which shutdown is initiated by upsmon(8). By default, the UPS may not report low battery until there are only a few seconds left. Common values are around 25–30.

Allan N. Hessenflow <[email protected]>

The core driver:

nutupsdrv(8)

Other drivers for Tripp-Lite hardware:

tripplite(8), tripplite_usb(8), usbhid-ups(8)

Internet resources:

The NUT (Network UPS Tools) home page: http://www.networkupstools.org/