NOTE

This man page only documents the hardware-specific features of the rhino driver. For information about the core driver, see nutupsdrv(8).

SUPPORTED HARDWARE

This driver has been tested with :

Rhino 6000 VA

Rhino 7500 VA

Rhino 10000 VA

Rhino 20000 VA

All Rhino models are sinusoidal on-line.

EXTRA ARGUMENTS

This driver support the following extra optional settings in ups.conf(5):

battext = n - (default = 0, no extra battery, where n = Ampere*hour )

COMMANDS

load.on - Turn on the load immediately

load.off - Turn off the load immediately

bypass.start - Put the UPS in bypass mode

bypass.stop - Put the UPS out of bypass mode

shutdown.stayoff - Shut down in 3 minutes and do not return

AUTHOR

Silvino B. Magalhães <[email protected]>

RELATED TO rhino…

The core driver:

nutupsdrv(8)

Internet resources:

The NUT (Network UPS Tools) home page: http://www.networkupstools.org/