Driver for liebert ups, using the esp-ii serial protocol
This man page only documents the hardware-specific features of the liebert-esp2 driver. For information about the core driver, see nutupsdrv(8).
This is an experimental driver. You have been warned.
This driver supports the following optional settings in ups.conf(5):
baudrate=num
Set the speed of the serial connection - 1200, 2400 (default), 4800, 9600 or 19200.
Richard Gregory <R.Gregory at liverpool.ac.uk>, Arjen de Korte <adkorte-guest at alioth.debian.org>
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/