bestfortress (8)

This man page only documents the hardware-specific features of the bestfortress driver. For information about the core driver, see nutupsdrv(8).

This driver supports old Best Fortress UPS equipment using a serial connection.

This driver supports the following optional settings in the ups.conf(5):

baudrate=num

Set the speed of the serial connection - 1200, 2400, 4800 or 9600.

max_load=VA

Set the full-scale value of the ups.load variable.

Holger Dietze <[email protected]>, Stuart D. Gathman <[email protected]>

The core driver:

nutupsdrv(8)

The newer Best Power drivers:

bestups(8), bestuferrups(8), bestfcom(8)

Internet resources:

The NUT (Network UPS Tools) home page: http://www.networkupstools.org/