Reduce science exposure in ifu configuration and on/off mode
esorex xsh_scired_ifu_offset_drl [OPTIONS] FILE.sof
This recipe reduces science exposure in IFU configuration and on/off mode Input Frames :
- A set of 2xn Science frames, Tag = OBJECT_IFU_OFFSET_arm, SKY_IFU_arm
- A spectral format table (Tag = SPECTRAL_FORMAT_TAB_arm)
- A master flat frame (Tag = MASTER_FLAT_IFU_arm)
- An order table frame(Tag = ORDER_TABLE_EDGES_IFU_arm)
- 3 wave solution frames, one per slitlet (Tag = WAVE_TAB_ARC_IFU_slitlet_arm)
where \'slitlet\' is DOWN, CEN or UP
- [OPTIONAL] A dispersion table (Tag = DISP_TAB_IFU_arm)
- [OPTIONAL] A badpixel map (Tag = BADPIXEL_MAP_arm)
Products :
- 3 Spectrum order tables 2D (1 per slitlet), PRO.CATG=ORDER2D_slitlet_IFU_arm - 3 Spectrum order tables 1D (1 per slitlet), PRO.CATG=ORDER1D_slitlet_IFU_arm - 3 Spectrum merge tables 2D (1 per slitlet), PRO.CATG=MERGE2D_slitlet_IFU_arm - 3 Spectrum merge tables 1D (1 per slitlet), PRO.CATG=MERGE1D_slitlet_IFU_arm - 1 Spectrum merge 3D, PRO.CATG=MERGE3D_IFU_arm
--keep-temp <str>
If \'no\', temporary files are deleted. (str; default: \'no\'). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.keep-temp [default = no].
--debug-level <str>
Additional xshooter debug level. One of \'none\', \'low\', \'medium\', \'high\' (str; default: \'none\'). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.debug-level [default = none].
--time-stamp <bool>
Add timestamp to product file name. (bool; default: False). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.time-stamp [default = False].
--decode-bp <long>
Integer representation of the bits to be considered bad when decoding the bad pixel mask pixel values. (long; default: 2144337919). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.decode-bp [default = 2144337919].
--pre-overscan-corr <long>
pre-overscan correction.0: no correction1: mean overscan correction2: mean prescan correction3: (mean pre+mean overscan)/2 correction (long; default: 1). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.pre-overscan-corr [default = 1].
--stack-method <str>
Method used to build master frame. (str; default: \'median\'). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.stack-method [default = median].
--klow <float>
Kappa used to clip low level values, when method is set to \'mean\' (float; default: 5.0). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.klow [default = 5.0].
--khigh <float>
Kappa used to clip high level values, when method is set to \'mean\' (float; default: 5.0). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.khigh [default = 5.0].
--crh-clip-kappa <float>
Kappa value in sigma clipping during CRH rejection using multiple frames (float; default: 5.0). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.crh-clip-kappa [default = 5.0].
--crh-clip-niter <long>
Number of iterations in sigma clipping during CRH rejection using multiple frames (long; default: 5). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.crh-clip-niter [default = 5].
--crh-clip-frac <float>
Minimal ratio of points accepted / total in sigma clipping during CRH rejection using multiple frames (float; default: 0.7). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.crh-clip-frac [default = 0.7].
--background-edges-margin <long>
X margin to order edge to define background sampling points (long; default: 1). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.background-edges-margin [default = 1].
--background-poly-deg-y <long>
Poly mode fit deg along Y. (long; default: 9). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.background-poly-deg-y [default = 9].
--background-poly-deg-x <long>
Poly mode fit deg along X. (long; default: 9). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.background-poly-deg-x [default = 9].
--background-poly-kappa <float>
Poly mode kappa value of kappa-sigma-clip outliers removal. (float; default: 10.0). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.background-poly-kappa [default = 10.0].
--removecrhsingle-sigmalim <float>
Poisson fluctuation threshold to flag CRHs (see van Dokkum, PASP,113,2001,p1420-27) (float; default: 5.0). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.removecrhsingle-sigmalim [default = 5.0].
--removecrhsingle-flim <float>
Minimum contrast between the Laplacian image and the fine structure image that a point must have to be flagged as CRH. (see van Dokkum, PASP,113,2001,p1420-27) (float; default: 2.0). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.removecrhsingle-flim [default = 2.0].
--removecrhsingle-niter <long>
Max number of iterations (long; default: 4). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.removecrhsingle-niter [default = 4].
--rectify-kernel <str>
Name of the Interpolation Kernel Used. Possible values are: tanh, sinc, sinc2, lanczos, hamming, hann. (str; default: \'tanh\'). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.rectify-kernel [default = tanh].
--rectify-radius <float>
Rectify Interpolation radius [bin units]. (float; default: 2.0). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.rectify-radius [default = 2.0].
--rectify-bin-lambda <float>
Wavelength step in the output spectrum [nm] (float; default: 0.06). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.rectify-bin-lambda [default = 0.06].
--rectify-bin-slit <float>
Spatial step along the slit in the output spectrum [arcsec] (float; default: 0.21). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.rectify-bin-slit [default = 0.21].
--localize-method <str>
Localization method (MANUAL, MAXIMUM, GAUSSIAN) used to detect the object centroid and height on the slit (str; default: \'MANUAL\'). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.localize-method [default = MANUAL].
--localize-chunk-nb <long>
Number of chunks in the full spectrum to localize the object (long; default: 10). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.localize-chunk-nb [default = 10].
--localize-thresh <float>
Threshold relative to the peak intensity below which the edges of the object are detected for MAXIMUM localization (float; default: 0.1). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.localize-thresh [default = 0.1].
--localize-deg-lambda <long>
Degree in lambda in the localization polynomial expression slit=f(lambda), used only for MAXIMUM and GAUSSIAN (long; default: 0). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.localize-deg-lambda [default = 0].
--localize-slit-position <float>
Object position on the slit for MANUAL localization [arcsec] (float; default: 0.0). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.localize-slit-position [default = 0.0].
--localize-slit-hheight <float>
Object half height on the slit for MANUAL localization [arcsec] (float; default: 2.0). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.localize-slit-hheight [default = 2.0].
--localize-kappa <float>
Kappa value for sigma clipping in the localization polynomial fit (float; default: 3.0). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.localize-kappa [default = 3.0].
--localize-niter <long>
Number of iterations for sigma clipping in the localization polynomial fit (long; default: 3). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.localize-niter [default = 3].
--localize-use-skymask <bool>
TRUE if we want to mask sky lines using SKY_LINE_LIST file. (bool; default: False). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.localize-use-skymask [default = False].
--extract-method <str>
Method used for extraction (LOCALIZATION, NOD) (str; default: \'LOCALIZATION\'). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.extract-method [default = LOCALIZATION].
--stdextract-interp-hsize <long>
Half size of mask used to define object cross order profile (long; default: 30). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.stdextract-interp-hsize [default = 30].
--shift-offsettab-low <float>
Global shift of the lower slitlet slit positions, relative to the central one[arcsec]. (float; default: 0.0). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.shift-offsettab-low [default = 0.0].
--shift-offsettab-up <float>
Global shift of the upper slitlet slit positions, relative to the central one[arcsec]. (float; default: 0.0). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.shift-offsettab-up [default = 0.0].
--compute-map <bool>
if TRUE recompute (wave and slit) maps from the dispersion solution. If sky-subtract is set to TRUE this must be set to TRUE. (bool; default: True). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.compute-map [default = True].
--check-afc <bool>
Input AFC corrected model/wave solution and science frame check.If TRUE the recipe verify that the input mode/wave solution is AFC corrected, its INS.OPTIi.NAME is \'Pin_0.5 \', and its OBS.ID and OBS.TARG.NAME values matches with the corresponding values of the science frame. (bool; default: True). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.check-afc [default = True].
--flat-method <str>
method adopted for flat: (str; default: \'master\'). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset_drl.flat-method [default = master].
Note that it is possible to create a configuration file containing these options, along with suitable default values. Please refer to the details provided by the 'esorex --help' command.
The full documentation for the xshoo pipeline can be downloaded as a PDF file using the following URL:
ftp://ftp.eso.org/pub/dfs/pipelines/xshoo/xshoo-pipeline-manual-12.1.pdf
An overview over the existing ESO pipelines can be found on the web page http://www.eso.org/sci/software/pipelines/.
Basic documentation about the EsoRex program can be found at the esorex (1) man page.
It is possible to call the pipelines from python using the python-cpl package. See http://packages.python.org/python-cpl/index.html for further information.
The other recipes of the xshoo pipeline are xsh_cfg_recover(7), xsh_lingain(7), xsh_geom_ifu(7), xsh_wavecal(7), xsh_scired_slit_nod(7), xsh_respon_slit_nod(7), xsh_mdark(7), xsh_respon_slit_offset(7), xsh_orderpos(7), xsh_scired_ifu_stare_drl(7), xsh_scired_ifu_stare(7), xsh_flexcomp(7), xsh_util_physmod(7), xsh_respon_slit_stare(7), xsh_2dmap(7), xsh_mflat(7), xsh_mbias(7), xsh_predict(7), xsh_scired_ifu_offset(7), xsh_scired_slit_stare(7), xsh_scired_slit_offset(7)
xsh_scired_ifu_offset_drl 2.5.2
P.Goldoni, L.Guglielmi, R. Haigron, F. Royer <[email protected]>
Please report any problems to [email protected]. Alternatively, you may send a report to the ESO User Support Department <[email protected]>.
This file is part of the X-shooter Instrument Pipeline Copyright (C) 2006 European Southern Observatory
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA