ocf_heartbeat_iscsi (7)

iscsi [start | stop | status | monitor | meta-data | validate-all]

OCF Resource Agent for iSCSI. Add (start) or remove (stop) iSCSI targets.

portal

The iSCSI portal address in the form: {ip_address|hostname}[":"port]

(required, string, no default)

target

The iSCSI target IQN.

(unique, required, string, no default)

discovery_type

Target discovery type. Check the open-iscsi documentation for supported discovery types.

(optional, string, default "sendtargets")

iscsiadm

open-iscsi administration utility binary.

(optional, string, default "iscsiadm")

udev

If the next resource depends on the udev creating a device then we wait until it is finished. On a normally loaded host this should be done quickly, but you may be unlucky. If you are not using udev set this to "no", otherwise we will spin in a loop until a timeout occurs.

(optional, string, default "yes")

try_recovery

If the iSCSI session exists but is currently inactive/broken, which is most probably due to network problems, the iSCSI layer will try to recover. If this parameter is set to true, we'll wait for the recovery to succeed. In that case the monitor operation can only time out so you should set the monitor op timeout attribute appropriately.

(optional, boolean, default false)

This resource agent supports the following actions (operations):

start

Starts the resource. Suggested minimum timeout: 120.

stop

Stops the resource. Suggested minimum timeout: 120.

status

Performs a status check. Suggested minimum timeout: 30.

monitor

Performs a detailed status check. Suggested minimum timeout: 30. Suggested interval: 120.

validate-all

Performs a validation of the resource configuration. Suggested minimum timeout: 5.

methods

Suggested minimum timeout: 5.

meta-data

Retrieves resource agent metadata (internal use only). Suggested minimum timeout: 5.

The following is an example configuration for a iscsi resource using the crm(8) shell:

primitive p_iscsi ocf:heartbeat:iscsi \
  params \
    portal=string \
    target=string \
  op monitor depth="0" timeout="30" interval="120"

\m[blue]http://www.linux-ha.org/wiki/iscsi_(resource_agent)\m[]

Linux-HA contributors (see the resource agent source for information about individual authors)