1152bit multikey ibutton
Non-volatile memory with password protection.
02 [.]XXXXXXXXXXXX[XX][/[ memory | pages/ident.[0-2|ALL] | pages/page.[0-2|ALL] | pages/password.[0-2|ALL] | settings/ident.[0-2|ALL] | settings/page.[0-2|ALL] | settings/password.[0-2|ALL] | settings/change_password.[0-2|ALL] | settings/reset_password.[0-2|ALL] | address | crc8 | id | locator | r_address | r_id | r_locator | type ]]
02
read-write, binary
144 bytes of non-volatile memory. Reading and writing (with offset) to the files will only work if currently used password is correct for all 3 pages.
read-write, binary
Memory is split into 3 pages of 48 bytes each. ALL is an aggregate of the pages. Each page is accessed sequentially. If currently used password is incorrect, random data will be returned when reading a page.
write, binary
Memory is split into 3 pages and each page has a unique password (8 bytes). ALL is an aggregate of the password. Each page is accessed sequentially. Writing to this file will set the currently used password when accessing memory in corresponding page. If the password is wrong, random data will be returned when reading memory.
read-write, binary
Memory is split into 3 pages and each page has a unique identification (8 bytes). ALL is an aggregate of the ident. Each page is accessed sequentially. Identification will return correct result even if currently used password is incorrect.
read-write, binary
Memory is split into 3 pages of 48 bytes each. ALL is an aggregate of the pages. Each page is accessed sequentially. If currently used password is incorrect, random data will be returned when reading a page. (same as pages/page.*)
read-write, binary
Memory is split into 3 pages and each page has a unique identification (8 bytes). ALL is an aggregate of the ident. Each page is accessed sequentially. Identification will return correct result even if currently used password is incorrect. (same as pages/ident.*)
write, binary
Memory is split into 3 pages and each page has a unique password (8 bytes). ALL is an aggregate of the password. Each page is accessed sequentially. Writing to this file will set the currently used password when accessing memory in corresponding page. If the password is wrong, random data will be returned when reading memory. (same as pages/password.*)
write, binary
Memory is split into 3 pages and each page has a unique password (8 bytes). ALL is an aggregate of the ident. Each page is accessed sequentially. Writing to this file will reset the password on the page. NOTE: All data in corresponding page will be deleted!
write, binary
Memory is split into 3 pages and each page has a unique password (8 bytes). ALL is an aggregate of the ident. Each page is accessed sequentially. Writing to this file will change the password on the page. NOTE: Currently used password have to be set to correct password before changing password. Data in the corresponding page is NOT effected.
read-only, ascii
The entire 64-bit unique ID. Given as upper case hexidecimal digits (0-9A-F).
address starts with the family code
r address is the address in reverse order, which is often used in other applications and labeling.
read-only, ascii
The 8-bit error correction portion. Uses cyclic redundancy check. Computed from the preceding 56 bits of the unique ID number. Given as upper case hexidecimal digits (0-9A-F).
read-only, ascii
The 8-bit family code. Unique to each type of device. Given as upper case hexidecimal digits (0-9A-F).
read-only, ascii
The 48-bit middle portion of the unique ID number. Does not include the family code or CRC. Given as upper case hexidecimal digits (0-9A-F).
r id is the id in reverse order, which is often used in other applications and labeling.
read-only, ascii
Uses an extension of the 1-wire design from iButtonLink company that associated 1-wire physical connections with a unique 1-wire code. If the connection is behind a Link Locator the locator will show a unique 8-byte number (16 character hexidecimal) starting with family code FE.
If no Link Locator is between the device and the master, the locator field will be all FF.
r locator is the locator in reverse order.
read-only, yes-no
Is the device currently present on the 1-wire bus?
read-only, ascii
Part name assigned by Dallas Semi. E.g. DS2401 Alternative packaging (iButton vs chip) will not be distiguished.
None.
1-wire is a wiring protocol and series of devices designed and manufactured by Dallas Semiconductor, Inc. The bus is a low-power low-speed low-connector scheme where the data line can also provide power.
Each device is uniquely and unalterably numbered during manufacture. There are a wide variety of devices, including memory, sensors (humidity, temperature, voltage, contact, current), switches, timers and data loggers. More complex devices (like thermocouple sensors) can be built with these basic devices. There are also 1-wire devices that have encryption included.
The 1-wire scheme uses a single bus master and multiple slaves on the same wire. The bus master initiates all communication. The slaves can be individually discovered and addressed using their unique ID.
Bus masters come in a variety of configurations including serial, parallel, i2c, network or USB adapters.
OWFS is a suite of programs that designed to make the 1-wire bus and its devices easily accessible. The underlying priciple is to create a virtual filesystem, with the unique ID being the directory, and the individual properties of the device are represented as simple files that can be read and written.
Details of the individual slave or master design are hidden behind a consistent interface. The goal is to provide an easy set of tools for a software designer to create monitoring or control applications. There are some performance enhancements in the implementation, including data caching, parallel access to bus masters, and aggregation of device communication. Still the fundemental goal has been ease of use, flexibility and correctness rather than speed.
The DS1991 (3) is an iButton with password protected non-volatile memory. Data is read/written with error checking (transparent to the user). The memory is divided into 3 different pages with 3 separate passwords.
All 1-wire devices are factory assigned a unique 64-bit address. This address is of the form:
Family Code
8 bits
Address
48 bits
CRC
8 bits
Addressing under OWFS is in hexidecimal, of form:
01.123456789ABC
where 01 is an example 8-bit family code, and 12345678ABC is an example 48 bit address.
The dot is optional, and the CRC code can included. If included, it must be correct.
http://pdfserv.maxim-ic.com/en/ds/DS1991.pdf
owfs (1) owhttpd (1) owftpd (1) owserver (1) owdir (1) owread (1) owwrite (1) owpresent (1) owtap (1)
owfs (5) owtap (1) owmon (1)
owtcl (3) owperl (3) owcapi (3)
DS1427 (3) DS1904(3) DS1994 (3) DS2404 (3) DS2404S (3) DS2415 (3) DS2417 (3)
DS2401 (3) DS2411 (3) DS1990A (3)
DS1982 (3) DS1985 (3) DS1986 (3) DS1991 (3) DS1992 (3) DS1993 (3) DS1995 (3) DS1996 (3) DS2430A (3) DS2431 (3) DS2433 (3) DS2502 (3) DS2506 (3) DS28E04 (3) DS28EC20 (3)
DS2405 (3) DS2406 (3) DS2408 (3) DS2409 (3) DS2413 (3) DS28EA00 (3)
DS1822 (3) DS1825 (3) DS1820 (3) DS18B20 (3) DS18S20 (3) DS1920 (3) DS1921 (3) DS1821 (3) DS28EA00 (3) DS28E04 (3) EDS0064 (3) EDS0065 (3) EDS0066 (3) EDS0067 (3) EDS0068 (3) EDS0071 (3) EDS0072 (3) MAX31826 (3)
DS1922 (3) DS2438 (3) EDS0065 (3) EDS0068 (3)
DS2450 (3)
DS2890 (3)
DS2436 (3) DS2437 (3) DS2438 (3) DS2751 (3) DS2755 (3) DS2756 (3) DS2760 (3) DS2770 (3) DS2780 (3) DS2781 (3) DS2788 (3) DS2784 (3)
DS2423 (3)
LCD (3) DS2408 (3)
DS1977 (3)
DS2406 (3) TAI8570 EDS0066 (3) EDS0068 (3)
EEEF (3) DS2438 (3)
http://www.owfs.org
Christian Magnusson ([email protected])