9 Kernel routines
8,468 pages in section 9.
w1
-
w1_registers a new master deviceadd_ master_ device -
w1_register for a strong pullupnext_ pullup -
w1_post-write optionspost_ write -
w1_pre-write operationspre_ write -
w1_execute each dev->async_list callback entryprocess_ callbacks -
w1_Reads 8 bits.read_ 8 -
w1_Generates a write-1 cycle and samples the level.read_ bit -
w1_Reads a series of bytes.read_ block -
w1_register a device family driverregister_ family -
w1_unregister a master deviceremove_ master_ device -
w1_Issues a reset bus sequence.reset_ bus -
w1_resume instead of another match ROMreset_ resume_ command -
w1_reset and select a slavereset_ select_ slave -
w1_Performs a ROM Search & registers any devices found.search -
w1_Generates a write-0 or write-1 cycle and samples the level.touch_ bit -
w1_Touches a series of bytes.touch_ block -
w1_* Does a triplet - used for searching ROM addresses.triplet -
w1_unregister a device family driverunregister_ family -
w1_Writes 8 bits.write_ 8 -
w1_Generates a write-0 or write-1 cycle.write_ bit -
w1_Writes a series of bytes.write_ block
wa
-
wait_sleep until a condition gets trueevent -
wait_sleep until a condition gets trueevent_ cmd -
wait_sleep until a condition gets true or a timeout elapsesevent_ hrtimeout -
wait_sleep until a condition gets trueevent_ interruptible -
wait_sleep exclusively until a condition gets trueevent_ interruptible_ exclusive_ locked -
wait_sleep until a condition gets trueevent_ interruptible_ exclusive_ locked_ irq -
wait_sleep until a condition gets true or a timeout elapsesevent_ interruptible_ hrtimeout -
wait_sleep until a condition gets true. The condition is checked under the lock. This is expected to be called with the lock taken.event_ interruptible_ lock_ irq -
wait_sleep until a condition gets true. The condition is checked under the lock. This is expected to be called with the lock taken.event_ interruptible_ lock_ irq_ cmd -
wait_sleep until a condition gets true or a timeout elapses. The condition is checked under the lock. This is expected to be called with the lock taken.event_ interruptible_ lock_ irq_ timeout -
wait_sleep until a condition gets trueevent_ interruptible_ locked -
wait_sleep until a condition gets trueevent_ interruptible_ locked_ irq -
wait_sleep until a condition gets true or a timeout elapsesevent_ interruptible_ timeout -
wait_sleep until a condition gets trueevent_ killable -
wait_sleep until a condition gets true. The condition is checked under the lock. This is expected to be called with the lock taken.event_ lock_ irq -
wait_sleep until a condition gets true. The condition is checked under the lock. This is expected to be called with the lock taken.event_ lock_ irq_ cmd -
wait_sleep until a condition gets true or a timeout elapsesevent_ timeout -
wait_waits for completion of a taskfor_ completion -
wait_waits for completion of a task (w/intr)for_ completion_ interruptible -
wait_waits for completion (w/(to,intr))for_ completion_ interruptible_ timeout -
wait_waits for completion of a task (killable)for_ completion_ killable -
wait_waits for completion of a task (w/(to,killable))for_ completion_ killable_ timeout -
wait_waits for completion of a task (w/timeout)for_ completion_ timeout -
wait_for_ device_ probe -
wait_wait for writeback to finish, if necessary.for_ stable_ page -
wait_Wait for an atomic_t to become 0on_ atomic_ t -
wait_wait for a bit to be clearedon_ bit -
wait_wait for a bit to be cleared, when wanting to set iton_ bit_ lock -
wait_Wait for TASK_STOPPED or TASK_TRACEDtask_ stopped -
WaitWait for IOC doorbell handshake acknowledgeFor Doorbell Ack -
WaitWait for IOC to set its doorbell interrupt bitFor Doorbell Int -
WaitWait for and capture an IOC handshake reply.For Doorbell Reply -
wake_Wake up a waiter on a atomic_tup_ atomic_ t -
wake_wake up a waiter on a bitup_ bit -
wake_Wake up a specific processup_ process -
wakeupwait for events -
wakeup_wait for eventsany -
wakeup_wait for eventsone -
wakeup_wake up readers waiting on a channelreaders -
wanbook -
watchdogmonitor multiple inputs for a "heartbeat"
wb
wc
wd
we
wi
-
wimax_Register a new WiMAX devicedev_ add -
wimax_initialize a newly allocated instancedev_ init -
wimax_Unregister an existing WiMAX devicedev_ rm -
wimax_Send a message to user spacemsg -
wimax_Create a new skb for sending a message to userspacemsg_ alloc -
wimax_Return a pointer to a message's payloadmsg_ data -
wimax_Return a pointer and size of a message's payloadmsg_ data_ len -
wimax_Return a message's payload lengthmsg_ len -
wimax_Send a pre-allocated message to user spacemsg_ send -
wimax_Reports changes in the hardware RF switchreport_ rfkill_ hw -
wimax_Reports changes in the software RF switchreport_ rfkill_ sw -
wimax_Reset a WiMAX devicereset -
wimax_Set the software RF switch state for a WiMAX devicerfkill -
wimax_Set the current state of a WiMAX devicestate_ change -
wimax_Return the current state of a WiMAX devicestate_ get -
wiphy_apply a custom driver regulatory domainapply_ custom_ regulatory -
wiphy_get wiphy dev pointerdev -
wiphy_free wiphyfree -
wiphy_get wiphy namename -
wiphy_create a new wiphy for use with cfg80211new -
wiphy_return priv from wiphypriv -
wiphy_register a wiphy with cfg80211register -
wiphy_notify cfg80211 about hw block staterfkill_ set_ hw_ state -
wiphy_start polling rfkillrfkill_ start_ polling -
wiphy_stop polling rfkillrfkill_ stop_ polling -
wiphy_deregister a wiphy from cfg80211unregister
wo
wq
wr
-
write_[GENERIC] (Re)write the bad block tablebbt -
write_walk the list of dirty pages of the given address space and write all of them.cache_ pages -
write_write an inode to diskinode_ now -
write_write out a single page and optionally wait on I/Oone_ page -
write_Write to a Z8530 control registerzsctrl -
write_Write to a Z8530 control registerzsdata -
write_Write to a Z8530 channel registerzsreg -
writeback_determine whether there is writeback in progressin_ progress -
writeback_writeback dirty inodes from given super_blockinodes_ sb -
writeback_start writeback if none underwayinodes_ sb_ if_ idle -
writeback_writeback dirty inodes from given super_blockinodes_ sb_ nr -
writeback_start writeback if none underwayinodes_ sb_ nr_ if_ idle -
writing_usb_ driver