5 File formats
3,927 pages in section 5.
ia
ib
ic
id
ie
if
-
if.interface, firewalling, and QoS configuration file. /etc/netscript/if.conf - interface setup shell script file /etc/netscript/qos.conf - QoS setup shell script file /etc/netscript/ipfilter.conf - IP iptables filtering shell script fileconf -
ifplugd.ifplugd configuration fileconf -
ifstateinterface state database -
ifstated.Interface State daemon configuration fileconf -
iftabstatic information about the network interfaces -
ifupdown-ifupdown2 addon modules interface configurationaddons- interfaces -
ifupdown-ifupdown-multi extension for the interfaces(5) file formatmulti- interfaces -
ifupdown-Global configuration file for ifupdown-ngng. conf
ig
ik
im
-
imapd.Cyrus IMAP documentation IMAP configuration fileconf -
imapfilter_imapfilter configuration fileconfig -
imcrcIMC scheme configuration commands file -
imdbgetrcConfiguration for imdb-get(1). -
imvimv configuration file -
imv-imv configuration filewayland -
imv-imv configuration filex11 -
imvrimv configuration file
in
-
in.newsx incoming host statehosts -
inadyn.inadyn DDNS client configuration fileconf -
incoming.Configuration of incoming news feedsconf -
incron.main config file for inotify cron (incron)conf -
incrontabtables for driving inotify cron (incron) -
INDEXFile containing information about the state of the ports tree -
indexer.configuration file for indexerconf -
inetd.internet super-serverconf -
inetsim.Configuration file for INetSimconf -
inetutils-user configuration for ftpnetrc -
inforeadable online documentation -
initUpstart init daemon job configuration -
init-interpreter for short and simple init.d scriptsd- script -
initramfs.configuration file for mkinitramfsconf -
initrd-Operating system identificationrelease -
initscriptscript that executes inittab commands -
inittabformat of the inittab file used by the sysv-compatible init process -
inn-Configuration for nnrpd RADIUS authenticatorradius. conf -
inn-Configuration data for InterNetNews secretssecrets. conf -
inn.Configuration data for InterNetNews programsconf -
innfeed.Configuration file for innfeedconf -
innreport.Configuration file for innreportconf -
innwatch.List of supervisory actions taken by innwatchctl -
inodeformat of file system volume -
inputinput data file format -
install.OpenBSD installation and upgrade customizationsite -
installurlOpenBSD mirror server location -
instances.zorp(8) instances databaseconf -
integritytabConfiguration for integrity block devices -
intel_Configuration file for intel_lpmdlpmd_ config. xml -
interface-resolvconf configuration fileorder -
interfacesnetwork interface configuration for ifup and ifdown -
interfaces-B.A.T.M.A.N. adv. extensions for the interfaces(5) file formatbatman -
interfaces-Bonding/LAG extensions for the interfaces(5) file formatbond -
interfaces-Bridge extensions for the interfaces(5) file formatbridge -
interfaces-forwarding vocabulary for the interfaces(5) file formatforward -
interfaces-interface configuration databaseng -
interfaces-PPP extensions for the interfaces(5) file formatppp -
interfaces-Tunnel extensions for the interfaces(5) file formattunnel -
interfaces-VRF extensions for the interfaces(5) file formatvrf -
interfaces-VXLAN extensions for the interfaces(5) file formatvxlan -
interfaces-WiFi vocabulary for the interfaces(5) file formatwifi -
interfaces-Wireguard extensions for the interfaces(5) file formatwireguard -
interfaces-wg-quick extensions for the interfaces(5) file formatwireguard- quick -
introintroduction to file formats and filesystems -
intuitively.Configuration file for intuitivelyconf
io
ip
-
ip_Traffic Server IP access control configuration file The ip_allow.config file controls client access to Traffic Server and Traffic Server connections to the servers. You can specify ranges of IP addresses that are allowed to connect to Traffic Server or that are allowed to be remapped by Traffic Server. After you modify the ip_allow.config file, navigate to the Traffic Server bin directory and run the traffic_ctl config reload command to apply changes.allow. config -
ip_Traffic Server IP access control configuration file The ip_allow.yaml file controls client access to Traffic Server and Traffic Server connections to upstream servers. This control is specified via rules. Each rule has: Inbound rules control access to Traffic Server from user agents. Outbound rules control access to upstream destinations from Traffic Server. The IP addresses always apply to the remote address for Traffic Server. That is, the user agent IP address for inbound rules and the upstream destination address for outbound rules. The rule can apply at the connection level or just to specific methods. Traffic Server can be updated for changes to the rules in ip_allow.yaml file, by running the traffic_ctl config reload.allow. yaml -
ipahealthcheck.ipa-healthcheck configuration fileconf -
ipcSystem V interprocess communication mechanisms -
ipfIPFilter firewall rules file format -
ipf.IPFilter firewall rules file formatconf -
ipf6.IPFilter firewall rules file formatconf -
ipfilter -
ipfilter-netscript ipfilter-defs compile definitions directory.defs -
ipfilter.interface, firewalling, and QoS configuration file. /etc/netscript/if.conf - interface setup shell script file /etc/netscript/qos.conf - QoS setup shell script file /etc/netscript/ipfilter.conf - IP iptables filtering shell script fileconf -
ipfm.IP Flow Meter configuration fileconf -
ipmasq-configuration file used to set up IP Masquerading kernel modulesmodules -
ipmasq-rules file used to set up IP Masqueradingrule -
ipmi-IPMI configuration file detailsconfig. conf -
ipmi_IPMI LAN Interface config filelan -
ipmi_specify sensor interpretation rulesmonitoring_ sensors. conf -
ipmi_sim_ cmd -
ipmiconsole.specify default values to FreeIPMIconf -
ipmidetect.specify alternate default values for the ipmidetect libraryconf -
ipmidetectd.ipmidetectd configuration fileconf -
ipmimonitoring.specify sensor interpretation rulesconf -
ipmimonitoring_specify sensor interpretation rulessensors. conf -
ipmipower.specify default values to FreeIPMIconf -
ipmiseld.ipmiseld configuration fileconf -
ipmonipmon configuration file format -
ipmon.ipmon configuration file formatconf -
ipnatIPFilter NAT file format -
ipnat.IPFilter NAT file formatconf -
ipnrcIPN scheme configuration commands file -
ippl.IP Protocols Logger configuration fileconf -
ippoolIP Pool file format -
ipptoolfileipptool file format -
ipsec.IPsec configuration and connectionsconf -
ipsec.secrets for IKE/IPsec authenticationsecrets -
ipsec_list of existing erouteseroute -
ipsec_IPsec configuration and connectionsipsec. conf -
ipsec_secrets for IKE/IPsec authenticationipsec. secrets -
ipsec_list KLIPS (kernel IPSEC support) debug features and levelklipsdebug -
ipsec_lists PF_KEY sockets registered with KLIPSpf_ key -
ipsec_list IPSEC Security Associationsspi -
ipsec_list IPSEC Security Association groupingsspigrp -
ipsec_lists IPSEC virtual interfaces attached to real interfacestncfg -
ipsec_KLIPS statistic on number of ACQUIREstrap_ count -
ipsec_KLIPS statistic on number of successful ACQUIREstrap_ sendcount -
ipsec_lists KLIPS version informationversion -
ipsvd-format of the ipsvd(8) instructions directoryinstruct -
iptotal_iptotal configuration fileconfig -
ipv6toolkit.Configuration file for the SI6 Networks' IPv6 address monitoring daemon (ipv6mon)conf -
ipwatchd.Configuration file of IPwatchD daemonconf -
ipx_Configuration file for ipxdticks
ir
is
-
isakmpd.configuration file for isakmpdconf -
isakmpd.policy configuration file for isakmpdpolicy -
isapnp.File format used by isapnp.conf -
iscsi.iSCSI initiator configuration fileconf -
isdn.config file for isdnlogconf -
isdnformatcommon isdn config file format -
isdnlogisdn log file -
isdnlog.user base isdnlog config fileusers -
isdntimetime format in isdn configuration files (isdnlog and vbox) -
isns_iSNS configuration fileconfig -
isnsadm.iSNS configuration fileconf -
isnsd.iSNS configuration fileconf -
isnsdd.iSNS configuration fileconf -
isodumpformat of IEEE 1394 isochronous packets dump file -
ispellformat of ispell dictionaries and affix files -
isrcsubmit-isrcsubmit Documentationconfig -
issueprelogin message and identification file -
issue.identification file for telnet sessionsnet