xsh_scired_ifu_offset7

Usage

Overview

This recipe Reduce science IFU on-off exposures and build a 3D cube Input Frames :
- A set of 2xn Science frames, Tag = OBJECT_IFU_OFFSET_arm, SKY_IFU_arm
- A spectral format table (Tag = SPECTRAL_FORMAT_TAB_arm)
- A master flat frame (Tag = MASTER_FLAT_IFU_arm)
- An order table frame(Tag = ORDER_TABLE_EDGES_IFU_arm)
- 3 wave solution frames, one per slitlet (Tag = WAVE_TAB_ARC_IFU_slitlet_arm)
where ´slitlet´ is DOWN, CEN or UP
- [OPTIONAL] A dispersion table (Tag = DISP_TAB_IFU_arm)
- [OPTIONAL] A non-linear badpixel map (Tag = BP_MAP_NL_arm)
- [OPTIONAL] A reference badpixel map (Tag = BP_MAP_RP_arm) Products :
- Merged 3D data cube (PREFIX_MERGE3D_DATA_OBJ_arm)
- QC Traces of 3D data cube (PREFIX_MERGE3D_TRACE_OBJ_arm)
- Order by order 3D data cube (PREFIX_ORDER3D_DATA_OBJ_arm)
- Order by order 3D qual cube (IFU_CFG_COR_arm)
- Order by order 3D qual cube (PREFIX_MERGE3D_DATA_SKY_arm)
- where PREFIX is SCI, FLUX, TELL if input raw DPR.TYPE contains OBJECT or FLUX or TELLURIC
- 1 Spectrum merge 3D, PRO.CATG=MERGE3D_IFU_arm

Options

--keep-temp <str>

If ´no´, temporary files are deleted. (str; default: ´no´). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset.keep-temp [default = no].

--debug-level <str>

Additional xshooter debug level. One of ´none´, ´low´, ´medium´, ´high´ (str; default: ´none´). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset.debug-level [default = none].

--time-stamp <bool>

Add timestamp to product file name. (bool; default: False). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset.time-stamp [default = False].

--decode-bp <int>

Integer representation of the bits to be considered bad when decoding the bad pixel mask pixel values. Most frequent codes relevant for the user: 0: good pixel, 8: pick-up noise, 16: cosmic-ray removed, 32: cosmic-ray unremoved, 128: calibration file defect, 256: hot pixel, 512: dark pixel, 4096: A/D converted saturation, 32768: non linear pixel, 1048576: extrapolated flux in NIR, 4194304: Interpolated flux during extraction. (int; default: 2144337919). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset.decode-bp [default = 2144337919].

--pre-overscan-corr <int>

pre-overscan correction. 0: no correction 1: mean overscan correction 2: mean prescan correction 3: (mean pre+mean overscan)/2 correction (int; default: 1). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset.pre-overscan-corr [default = 1].

--stack-method <str>

Method used to build master frame. (str; default: ´median´). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset.stack-method [default = median].

--klow <float>

Kappa used to clip low level values, when method is set to ´mean´ (float; default: 5.0). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset.klow [default = 5.0].

--khigh <float>

Kappa used to clip high level values, when method is set to ´mean´ (float; default: 5.0). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset.khigh [default = 5.0].

--crh-clip-kappa <float>

Kappa value in sigma clipping during CRH rejection using multiple frames (float; default: 5.0). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset.crh-clip-kappa [default = 5.0].

--crh-clip-niter <int>

Number of iterations in sigma clipping during CRH rejection using multiple frames (int; default: 5). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset.crh-clip-niter [default = 5].

--crh-clip-frac <float>

Minimal ratio of points accepted / total in sigma clipping during CRH rejection using multiple frames (float; default: 0.7). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset.crh-clip-frac [default = 0.7].

--removecrhsingle-sigmalim <float>

Poisson fluctuation threshold to flag CRHs (see van Dokkum, PASP,113,2001,p1420-27) (float; default: 5.0). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset.removecrhsingle-sigmalim [default = 5.0].

--removecrhsingle-flim <float>

Minimum contrast between the Laplacian image and the fine structure image that a point must have to be flagged as CRH. (see van Dokkum, PASP,113,2001,p1420-27) (float; default: 2.0). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset.removecrhsingle-flim [default = 2.0].

--removecrhsingle-niter <int>

Max number of iterations (int; default: 4). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset.removecrhsingle-niter [default = 4].

--rectify-kernel <str>

Name of the Interpolation Kernel Used. Possible values are: tanh, sinc, sinc2, lanczos, hamming, hann. (str; default: ´tanh´). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset.rectify-kernel [default = tanh].

--rectify-radius <float>

Rectify Interpolation radius [bin units]. (float; default: 2.0). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset.rectify-radius [default = 2.0].

--rectify-bin-lambda <float>

Wavelength step in the output spectrum [nm] (float; default: -1.0). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset.rectify-bin-lambda [default = -1.0].

--rectify-bin-slit <float>

Spatial step along the slit in the output spectrum [arcsec] (float; default: -1.0). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset.rectify-bin-slit [default = -1.0].

--localize-method <str>

Localization method (MANUAL, MAXIMUM, GAUSSIAN) used to detect the object centroid and height on the slit (str; default: ´MANUAL´). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset.localize-method [default = MANUAL].

--localize-chunk-nb <int>

Number of chunks in the full spectrum to localize the object (int; default: 10). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset.localize-chunk-nb [default = 10].

--localize-thresh <float>

Threshold relative to the peak intensity below which the edges of the object are detected for MAXIMUM localization (float; default: 0.1). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset.localize-thresh [default = 0.1].

--localize-deg-lambda <int>

Degree in lambda in the localization polynomial expression slit=f(lambda), used only for MAXIMUM and GAUSSIAN (int; default: 0). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset.localize-deg-lambda [default = 0].

--localize-slit-position <float>

Object position on the slit for MANUAL localization [arcsec] (float; default: 0.0). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset.localize-slit-position [default = 0.0].

--localize-slit-hheight <float>

Object half height on the slit for MANUAL localization [arcsec] (float; default: 2.0). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset.localize-slit-hheight [default = 2.0].

--localize-kappa <float>

Kappa value for sigma clipping in the localization polynomial fit (float; default: 3.0). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset.localize-kappa [default = 3.0].

--localize-niter <int>

Number of iterations for sigma clipping in the localization polynomial fit (int; default: 3). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset.localize-niter [default = 3].

--localize-use-skymask <bool>

TRUE if we want to mask sky lines using SKY_LINE_LIST file. (bool; default: False). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset.localize-use-skymask [default = False].

--compute-map <bool>

if TRUE recompute (wave and slit) maps from the dispersion solution. If sky-subtract is set to TRUE this must be set to TRUE. (bool; default: False). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset.compute-map [default = False].

--trace-obj <bool>

if TRUE trace object position on each IFU slice. In this case order TAB edges is required (bool; default: False). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset.trace-obj [default = False].

--check-afc <bool>

Input AFC corrected model/wave solution and science frame check. If TRUE the recipe verify that the input mode/wave solution is AFC corrected, its INS.OPTIi.NAME is ´Pin_0.5 ´, and its OBS.ID and OBS.TARG.NAME values matches with the corresponding values of the science frame. (bool; default: True). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset.check-afc [default = True].

--cut-uvb-spectrum <bool>

TRUE if recipe cuts the UVB spectrum at 556 nm (dichroich) (bool; default: True). The full name of this option for the EsoRex configuration file is xsh.xsh_scired_ifu_offset.cut-uvb-spectrum [default = True].

Note that it is possible to create a configuration file containing these options, along with suitable default values. Please refer to the details provided by the 'esorex --help' command.

Version

xsh_scired_ifu_offset 3.5.0