xsh_geom_ifu7

Usage

Overview

This recipe Produces the spatial geometry of the IFU pattern on the sky Input Frames :
- A set of n science frames ( n == 1 or >=3, Tag = TRACE_arm)
- [UVB,VIS] A master bias frame (Tag = MASTER_BIAS_arm)
- [OPTIONAL] A master dark frame (Tag = MASTER_DARK_arm)
- A master flat frame (Tag = MASTER_FLAT_IFU_arm)
- An AFC corrected model order edges table for IFU frame (Tag = ORDER_TAB_AFC_IFU_arm)
- [PHYSMOD] An AFC corrected model cfg frame (Tag = XSH_MOD_CFG_OPT_AFC_arm)
- [POLY] An AFC corrected model wavesol frame (Tag = WAVE_TAB_AFC_arm)
- An AFC corrected dispersion solution frame (Tag = DISP_TAB_AFC_arm)
- [OPTIONAL] A badpixel map (Tag = BADPIXEL_MAP_arm) Products :
- A set of shift offset tables (Tag = OFFSET_TAB_slitlet_IFU_arm)

Options

--keep-temp <str>

If ´no´, temporary files are deleted. (str; default: ´no´). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.keep-temp [default = no].

--debug-level <str>

Additional xshooter debug level. One of ´none´, ´low´, ´medium´, ´high´ (str; default: ´none´). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.debug-level [default = none].

--time-stamp <bool>

Add timestamp to product file name. (bool; default: False). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.time-stamp [default = False].

--decode-bp <int>

Integer representation of the bits to be considered bad when decoding the bad pixel mask pixel values. Most frequent codes relevant for the user: 0: good pixel, 8: pick-up noise, 16: cosmic-ray removed, 32: cosmic-ray unremoved, 128: calibration file defect, 256: hot pixel, 512: dark pixel, 4096: A/D converted saturation, 32768: non linear pixel, 1048576: extrapolated flux in NIR, 4194304: Interpolated flux during extraction. (int; default: 2144337919). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.decode-bp [default = 2144337919].

--pre-overscan-corr <int>

pre-overscan correction. 0: no correction 1: mean overscan correction 2: mean prescan correction 3: (mean pre+mean overscan)/2 correction (int; default: 1). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.pre-overscan-corr [default = 1].

--stack-method <str>

Method used to build master frame. (str; default: ´median´). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.stack-method [default = median].

--klow <float>

Kappa used to clip low level values, when method is set to ´mean´ (float; default: 5.0). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.klow [default = 5.0].

--khigh <float>

Kappa used to clip high level values, when method is set to ´mean´ (float; default: 5.0). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.khigh [default = 5.0].

--crh-clip-kappa <float>

Kappa value in sigma clipping during CRH rejection using multiple frames (float; default: 5.0). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.crh-clip-kappa [default = 5.0].

--crh-clip-niter <int>

Number of iterations in sigma clipping during CRH rejection using multiple frames (int; default: 5). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.crh-clip-niter [default = 5].

--crh-clip-frac <float>

Minimal ratio of points accepted / total in sigma clipping during CRH rejection using multiple frames (float; default: 0.7). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.crh-clip-frac [default = 0.7].

--background-edges-margin <int>

X margin to order edge to define background sampling points (int; default: 1). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.background-edges-margin [default = 1].

--background-poly-deg-y <int>

Poly mode fit deg along Y. (int; default: 9). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.background-poly-deg-y [default = 9].

--background-poly-deg-x <int>

Poly mode fit deg along X. (int; default: 9). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.background-poly-deg-x [default = 9].

--background-poly-kappa <float>

Poly mode kappa value of kappa-sigma-clip outliers removal. (float; default: 10.0). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.background-poly-kappa [default = 10.0].

--removecrhsingle-sigmalim <float>

Poisson fluctuation threshold to flag CRHs (see van Dokkum, PASP,113,2001,p1420-27) (float; default: 5.0). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.removecrhsingle-sigmalim [default = 5.0].

--removecrhsingle-flim <float>

Minimum contrast between the Laplacian image and the fine structure image that a point must have to be flagged as CRH. (see van Dokkum, PASP,113,2001,p1420-27) (float; default: 2.0). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.removecrhsingle-flim [default = 2.0].

--removecrhsingle-niter <int>

Max number of iterations (int; default: 4). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.removecrhsingle-niter [default = 4].

--rectify-kernel <str>

Name of the Interpolation Kernel Used. Possible values are: tanh, sinc, sinc2, lanczos, hamming, hann. (str; default: ´tanh´). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.rectify-kernel [default = tanh].

--rectify-radius <float>

Rectify Interpolation radius [bin units]. (float; default: 4.0). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.rectify-radius [default = 4.0].

--rectify-bin-lambda <float>

Wavelength step in the output spectrum [nm] (float; default: -1.0). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.rectify-bin-lambda [default = -1.0].

--rectify-bin-slit <float>

Spatial step along the slit in the output spectrum [arcsec] (float; default: -1.0). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.rectify-bin-slit [default = -1.0].

--localizeifu-bckg-deg <int>

Degree (<=2) of the polynomial component in the cross-dispersion profile fit (int; default: 50). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.localizeifu-bckg-deg [default = 50].

--localizeifu-smooth-hsize <int>

Half-size of the median filter for smoothing the cross-dispersion profile prior to localization (int; default: 3). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.localizeifu-smooth-hsize [default = 3].

--localizeifu-wavelet-nscales <int>

Number of scales used for wavelet a trous algorithm (int; default: 5). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.localizeifu-wavelet-nscales [default = 5].

--localizeifu-wavelet-hf-skip <int>

Number of high frequency scales skipped from the wavelet decomposition (int; default: 2). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.localizeifu-wavelet-hf-skip [default = 2].

--localizeifu-sigma-low <float>

Gaussian fits of the cross-dispersion profile whose FWHM is lower than this value are rejected (float; default: 0.05). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.localizeifu-sigma-low [default = 0.05].

--localizeifu-sigma-up <float>

Gaussian fits of the cross-dispersion profile whose FWHM is larger than this value are rejected (float; default: 0.95). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.localizeifu-sigma-up [default = 0.95].

--localizeifu-snr-low <float>

Gaussian fits of the cross-dispersion profile whose SNR is lower than this value are rejected (float; default: 0.05). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.localizeifu-snr-low [default = 0.05].

--localizeifu-snr-up <float>

Gaussian fits of the cross-dispersion profile whose SNR is larger than this value are rejected (float; default: 0.95). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.localizeifu-snr-up [default = 0.95].

--localizeifu-slitlow-edges-mask <float>

in arsec (float; default: 0.0). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.localizeifu-slitlow-edges-mask [default = 0.0].

--localizeifu-slitup-edges-mask <float>

in arsec (float; default: 0.0). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.localizeifu-slitup-edges-mask [default = 0.0].

--localizeifu-use-skymask <bool>

TRUE if we want to mask sky lines using SKY_LINE_LIST file. (bool; default: False). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.localizeifu-use-skymask [default = False].

--localizeifu-chunk-hsize <int>

Half size of chunk [bin] (int; default: 0). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.localizeifu-chunk-hsize [default = 0].

--correctifu-niter <int>

Number of iterations in computing the localization shifts of the IFU slitlets (int; default: 3). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.correctifu-niter [default = 3].

--correctifu-lambdaref <float>

Reference wavelength where the reference localization on the slit is chosen (float; default: -1.0). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.correctifu-lambdaref [default = -1.0].

--correctifu-lambdaref-hsize <float>

HAlf size in nm to estimate reference wavelength (float; default: 2.5). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.correctifu-lambdaref-hsize [default = 2.5].

--do-cube <bool>

if TRUE creates a data cube (bool; default: False). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.do-cube [default = False].

--compute-map <bool>

if TRUE recompute (wave and slit) maps from the dispersion solution. (bool; default: True). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.compute-map [default = True].

--check-afc <bool>

Input AFC corrected model/wave solution and science frame check.If TRUE the recipe verify that the input mode/wave solution is AFC corrected, its INS.OPTIi.NAME is ´Pin_0.5 ´, and its OBS.ID and OBS.TARG.NAME values matches with the corresponding values of the science frame. (bool; default: True). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.check-afc [default = True].

--flat-method <str>

method adopted for flat: (str; default: ´blaze´). The full name of this option for the EsoRex configuration file is xsh.xsh_geom_ifu.flat-method [default = blaze].

Note that it is possible to create a configuration file containing these options, along with suitable default values. Please refer to the details provided by the 'esorex --help' command.

Version

xsh_geom_ifu 3.5.0