xirc2ps_cs4
Xircom ce2ps (and newer) device driver
Usage
insmod xirc2ps_cs.o [pc_debug= n] [full_duplex= n] [irq_list= i,j,...] [if_port= n] [lockup_hack= n]
Overview
xirc2ps_cs is the low-level Card Services driver for the Xircom 16-bit PCMCIA ethernet adapters. When this driver is attached to a card, it allocates the next available ethernet device.
Parameters
pc_debug=n-
Selects the PCMCIA debugging level. This parameter is only available if the module is compiled with debugging enabled. A non-zero value enables debugging.
if_port=n-
Selects the transceiver type, for some CE3B-100 cards that lack the ability to autonegotiate. For such cards, a value of 1 selects 10baseT, and 4 selects 100baseT.
full_duplex=n-
Selects full duplex mode. The default is 0 (half duplex).
irq_list=i,j,...-
Specifies the set of interrupts that may be allocated by this driver.
lockup_hack=n-
Enables a hack to avoid lockups on some cards. Use this only if you really have lockup problems with your card.
Releases
6 releases since Debian 2.0 (Hamm); the text changed 4 times.