DISPLAY
to get the default host and display number.
whirlygig6x
Usage
whirlygig [-display
host:display.screen]
[-window]
[-root]
[-mono]
[-install]
[-noinstall]
[-visual
arg]
[-window-id
arg]
[-xspeed
arg]
[-yspeed
arg]
[-whirlies
arg]
[-nlines
arg]
[-xmode
arg]
[-ymode
arg]
[-speed
arg]
[{-trail
1 | 0}]
[-color_modifier
arg]
[-start_time
arg]
[{-explain
1 | 0}]
[{-wrap
1 | 0}]
[-db]
[-no-db]
Overview
The whirlygig program draws a series of circles on your screen. They then move about in a cyclic pattern
Options
whirlygig accepts the following options:
-
-window -
Draw on a newly-created window. This is the default.
-
-root -
Draw on the root window.
-
-visual visual -
Specify which visual to use. Legal values are the name of a visual class, or the id number (decimal or hex) of a specific visual.
-
-xspeed speed -
Specify how fast the dots should cycle horizontally. Try out values from .01 to 4000. Defaults to 1.0.
-
-yspeed speed -
Specify how fast the dots should cycle vertically. Try out values from .01 to 4000. Defaults to 1.0.
-
-xamplitude factor -
Specify the horizontal amplitude. Try out values from .01 to 10. Defaults to 1.0.
-
-yamplitude factor -
Specify the horizontal amplitude. Try out values from .01 to 10. Defaults to 1.0.
-whirlies a number
|
Specify how many whirlies you want (per line). Defaults to a random number. |
|---|---|
-nlines number of lines
|
Specify how many lines of whirlies you want. Defaults to a random number. |
-
-xmode mode
-
-ymode mode -
Specify which mode to use for calculating the x and y positions of the whirlies. Can be any of spin, funky, circle, linear, test, fun, innie or lissajous. Defaults to 'change' mode, which randomly selects a new mode for x and y every now an then. Unrecognized options default to spin.
-
-explain -
Prints some strings to the window explaining what the initially selected modes are, before displaying the whirlies. Off by default.
- -trail 1 or 0
-
Trail mode fails to erase the whirlies as they move, so they leave a multicoloured trail behind. Doesn't work if the doubled buffered mode is using the X server's double buffer extension, and the useDBEclear resource is true (which it is by default).
-
-speed int -
Specifies how fast to cycle through the internal time. Values 1,2 and 3 look ok, up to 10 is not too bad, but beyond ends up flickery. Adjust xspeed and yspeed instead.
-
-start_time int -
Where in the internal time cycle to start. Ranges from 1 to 429496729, Defaults to a random value.
-
-xoffset factor -
Tell the whirlies to be offset by this factor of a sin. Defaults to 1.0
-
-yoffset factor -
Tell the whirlies to be offset by this factor of a cos. Defaults to 1.0
-
-offset_period factor -
Change the period of an offset cycle Defaults to 1
-
-color_modifier int -
How many colors away from the current should the next whirly be?
-
-wrap 1|0 -
Causes whirlies that fall off the edge of the screen to wrap over to the other end of the screen. Otherwise they disappear and new ones to materialize on the other side of the screen. The difference is subtle, but it is different. Try it. On by default.
-
-db
-
-no-db -
Use double buffering to reduce flicker. This uses the double buffering extension if your X server supports it, otherwise it draws to it's own pixmap buffer and copies that to the window, which works almost as well. If the resource 'useDBEClear' is true, whirlies are not individually erased, so the -trail option won't work, and running multiple instances on the root window will flicker.
Environment
-
XENVIRONMENT -
to get the name of a resource file that overrides the global resources stored in the RESOURCE_MANAGER property.
Releases
3 releases since Debian 3.1 (Sarge); the text changed 2 times.