visir_util_repack7

Usage

Overview

The files listed in the Set Of Frames (sof-file) must be tagged: VISIR-CUBE2-raw-file.fits CUBE2 or VISIR-BURST-raw-file.fits BURST VISIR-BURST-bpm-file.fits STATIC_MASK For BURST data it will remove planes where the chopper switched from on <-> off based on the timestamps in the header.

The product(s) will have a FITS card ´HIERARCH ESO PRO CATG´ with a value of one of: IMG_REPACKED_A_ON (NodPos: A, ChopPos: on) IMG_REPACKED_A_OFF (NodPos: A, ChopPos: off) IMG_REPACKED_B_ON (NodPos: B, ChopPos: on) IMG_REPACKED_B_OFF (NodPos: B, ChopPos: off) For CUBE2, the recipe will produce a static bad-pixel map, it will have a FITS card ´HIERARCH ESO PRO CATG´ with a value of: STATIC_MASK

Options

--planestart <int>

Plane number to start repacking from in each nod cycle,earlier planes are skipped. (int; default: 0). The full name of this option for the EsoRex configuration file is visir.visir_util_repack.planestart [default = 0].

--planelimit <int>

Limit number of processed inputplanes. It will repack until at least this number of input images have been processed or the full dataset has been repacked. Always full chop cycles need to be repacked so the number is adjusted upward to the next multiple of images per chop cycle. <= 0 for no limit. (int; default: -1). The full name of this option for the EsoRex configuration file is visir.visir_util_repack.planelimit [default = -1].

--ncycles <int>

Number of full on-off cycles to repack per nod cycles. <= 0 for all. (int; default: -1). The full name of this option for the EsoRex configuration file is visir.visir_util_repack.ncycles [default = -1].

--trimlow <int>

Burst data only. Number of additional planes to cut from before each plane with chopper movement. (int; default: 0). The full name of this option for the EsoRex configuration file is visir.visir_util_repack.trimlow [default = 0].

--trimhigh <int>

Burst data only. Number of additional planes to cut from after each plane with chopper movement. A value of -1 does not skip the plane of the movement. (int; default: 0). The full name of this option for the EsoRex configuration file is visir.visir_util_repack.trimhigh [default = 0].

--bkgcorrect <str>

Output background corrected planes by subtracting chop (on/off) and nod (A/B) planes Options: none: no correction chop: on - off chopnod: (Aon - Aoff) - (Bon - Boff) (str; default: ´none´). The full name of this option for the EsoRex configuration file is visir.visir_util_repack.bkgcorrect [default = none].

--normalize <bool>

Normalize planes by DIT (bool; default: True). The full name of this option for the EsoRex configuration file is visir.visir_util_repack.normalize [default = True].

--compress <bool>

Apply lossless compression on output files. Can only be done for integer type results. (bool; default: False). The full name of this option for the EsoRex configuration file is visir.visir_util_repack.compress [default = False].

--lincorrect <bool>

Apply linearity correction. Should only be enabled on high flux observations, may degrade results otherwise. (bool; default: False). The full name of this option for the EsoRex configuration file is visir.visir_util_repack.lincorrect [default = False].

Note that it is possible to create a configuration file containing these options, along with suitable default values. Please refer to the details provided by the 'esorex --help' command.

Version

visir_util_repack 4.4.2