vdr-wlfe1

Usage

Overview

vdr-wlfe is a Wayland remote frontend, that plays back streams provided by vdr-plugin-xineliboutput.

Options

--help

Show (this) help message

--audio=audiodriver[:device]

Select audio driver and optional port

--video=videodriver[:device]

Select video driver and optional port As far as supported, possible video drivers might be: xshm, xv, xvmc, xxmc, vidix, XDirectFB, opengl, sdl or none

--display=displayaddress

X11 display address

--wid=id

Use existing X11 window

--aspect=[auto|4:3|16:9|16:10|default]

Display aspect ratio (You can us a script to control the HW aspect ratio: --aspect=auto:path_to_script)

--fullscreen

Fullscreen mode

--hud

Head Up Display OSD mode

--width=x

Video window width

--height=x

Video window height

--noscaling

Disable all video scaling

--post=name[:arg=val[,arg=val]]

Load and use xine post plugins, e.g.:

•

--post=upmix

•

--post=upmix;tvtime:enabled=1,cheap_mode=1)

--lirc[=devicename]

Use lirc input device Optional lirc socket name can be given

--verbose

Verbose debug output

--silent

Silent mode (report only errors)

--syslog

Write all output to system log

--nokbd

Disable keyboard input

--daemon

Run as daemon (disable keyboard, log to syslog and fork to background)

--slave

Enable slave mode (read commands from stdin)

--reconnect

Automatically reconnect when connection has been lost

--tcp, --udp, --rtp

Use TCP, UDP or RTP transport If no transport options are given, transports are tried in following order: local pipe, rtp, udp, tcp

Examples

Search for VDR (xineliboutput) server, connect to it and negotiate best available transport, use best available audio:

    vdr-wlfe

Connect to 192.168.1.3 default port and negoate best available transport:

    vdr-wlfe xvdr://192.168.1.3

Connect to 192.168.2.100, port 12550 and use TCP transport:

    vdr-wlfe xvdr+tcp://192.168.2.100:12550

Automatically search for VDR server and use UDP transport:

    vdr-wlfe xvdr+udp:
    vdr-syfe --udp

Use alsa:

    vdr-wlfe --audio alsa

Use alsa (and specific card/sub-device):

    vdr-wlfe --audio alsa:plughw:1,1

Video driver (and display / device):

    vdr-wlfe --video xv
    vdr-wlfe --video xvmc:127.0.0.1:1.0

Note

If deinterlacing post plugin options are not given at command line, deinterlacing is controlled by VDR plugin configuration menu settings.

De-interlacing can also be forced on or off with command-line option "--post tvtime". Examples:

    vdr-wlfe --post tvtime:method=Linear,cheap_mode=1,pulldown=0,use_progressive_frame_flag=1
    vdr-wlfe --post tvtime:enable=0