usrp_x3xx_fpga_burner1
Usrp x-series fpga burner
Usage
usrp_x3xx_fpga_burner [OPTIONS]
Overview
Burn an FPGA image onto a connected USRP X-Series device. The program takes two main arguments. The first is either an IP address or an NI-RIO resource to decide the method of loading the FPGA image. The other is either the type of image to burn, in which case the program will choose the default image of that type and model, or a custom FPGA image path.
Options
Device IP Address:
|
--addr="Address" |
|---|---|
Device NI-RIO Resource:
|
--resource="Resource" |
RPC Port:
|
--rpc-port="Port" (default=5444) |
Image Type (1G, HG, or XG):
|
--type="Type" |
Custom FPGA path:
|
--fpga-path="Path" |
Initialize USRP with image currently burned onto device (Ethernet only):
|
--configure |
Verify image during Ethernet burn (takes longer):
|
--verify |
List connected USRP X-Series devices:
|
--list |
This help information:
|
--help |
Examples
Burning a 1-Gigabit image over Ethernet
usrp_x3xx_fpga_burner --addr=192.168.10.2 --type=1G
Burning a Hybrid image over PCIe
usrp_x3xx_fpga_burner --resource=RIO0 --type=HG
Burning a custom FPGA image over Ethernet
usrp_x3xx_fpga_burner --addr=192.168.10.2 --fpga=path="custom_image.bit"
Releases
4 releases since Debian 8 (Jessie); the text changed 2 times.