/dev/ttyU*
for callin ports
umct4freebsd
Magic control technology usb-rs232 converter driver
Usage
To compile this driver into the kernel, place the following lines in your kernel configuration file:
device usb device ucom device umct
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
umct_load="YES"
Overview
The umct driver provides support for USB to RS-232 converters based on the Magic Control Technology USB-232 design. These devices support most of the standard RS-232 features including baud rates ranging from 300 to 115200 bits per second. However, neither hardware nor software flow control seems to be supported.
Access to devices under this driver is via the ucom(4) framework and device nodes.
Hardware
The umct driver supports the following adapters:
-
Belkin F5U109
-
Belkin F5U409
-
D-Link DU-H3SP USB BAY Hub
-
Magic Control Technology USB-232
-
Sitecom USB-232
Files
-
-
/dev/ttyU*.init -
/dev/ttyU*.lock -
corresponding callin initial-state and lock-state devices
-
/dev/cuaU* -
for callout ports
-
/dev/cuaU*.init -
/dev/cuaU*.lock -
corresponding callout initial-state and lock-state devices
Releases
9 releases since Debian 5.0 (Lenny); the text changed 6 times.