ucsicontrol1

Usage

Options

--help, -h

Show usage message

--conn_rst conn_num soft|hard

Perform reset on the connector. Specify the type of the reset, soft or hard.

--get_cap

Get capabilities

--get_conn_cap conn_num

Get Connector Capability

--get_conn_sts conn_num

Get Connector Status

--get_cable_prop conn_num

Get Cable Properties

--get_cur_cam conn_num

Get Current Alternate mode

--get_alt_mode conn_num recipient

Get Alternate Modes

recipient: 0: connector, 1: SOP, 2: SOP’, 3: SOP’’

--get_pdos conn_num partner offset src_snk type

Get PDOs from local and partner Policy Managers

partner: set to 1 to retrieve partner PDOs

offset: starting offset of the first PDO to be returned, 0 to 7

src_snk: set to 1 to retrieve source PDOs, 0 to retrieve sink PDOs

type: type of PDOs to retrieve (0: current supported, 1: advertised, 2: maximum supported)

--set_uor conn_num DFP|UFP|Accept

Set the USB operation role for the connector to operate at. If the connector does not have an active connection, this command has no effect.

DFP: Downstream Facing Port

UFP: Upstream Facing Port

Accept: Accept role swap change requests from the port partner

--set_pdr conn_num SRC|SNK|Accept

Set the Power direction that the OPM wants the connector to operate at. If the connector does not have an active connection, or the partner is not PD-capable, this command has no effect.

SRC: Source role

SNK: Sink role

Accept: Accept power swap change requests from the port partner