ubertooth-debug1

Usage

ubertooth-debug -r <number>[,<number>[,...]]

Overview

ubertooth-debug(1) is a tool for reading register values from the CC2400 chip on Ubertooth One. It is primarily designed to assist firmware development but may be of interest to curious hackers.

Options

Options:

•

-r <reg>[,<reg> [,[...]]] : Read one or more registers from the CC2400 on Ubertooth

•

-r <start>-<end> : Read a consecutive set of registers from the CC2400 on Ubertooth

•

-v <0-2> : Sets the level of verbosity, default is 1.

•

-U<0-7> : Which Ubertooth device to use

Examples

To read the MANOR register, use:

ubertooth-debug -r 19

Registers can also be specified by name, the following will also read the MANOR register:

ubertooth-debug -r %manor

Read a range of registers:

ubertooth-debug -r 19-22

Dump all registers with:

ubertooth-debug -r 0x00-0x70