tracereplay1
Replay a trace in trace time from one uri to another
Usage
tracereplay [{-b | --broadcast}]
[-s
--snaplength
[snaplength]]
[{-f | --filter
[filter
string]}]
inputuri
outputuri
Descrption
tracereplay replays inputuri to outputuri in trace time. Checksums are recomputed on the fly.
-b
--broadcast-
Change the 802.3 (ethernet) destination address to the broadcast address. This will send the transmitted packets to any hosts on the local network.
-s[snaplength]
--snaplength[snaplength]-
Truncate the packets to the length specified. This only makes a difference if the inputuri is a capture device. The value should be > 0. Inappropriate values will be ignored, but a warning will be printed.
-f[filterstring]
--filter[filter]-
Apply a filter to the inputuri.
Links
More details about tracereplay (and libtrace) can be found at http://www.wand.net.nz/trac/libtrace/wiki/UserDocumentation
Releases
Unchanged in 7 releases since Debian 7 (Wheezy).