slic3r(1) on Linux
The text 88aedc9800cf, as Debian 8 (Jessie) shipped it.
Slice 3D models into G-Code for 3D-printing
Flags it lists
-
--autosave -
--bed-size -
--bed-temperature -
--bottom-solid-layers -
--bridge-acceleration -
--bridge-fan-speed -
--bridge-speed -
--brim-width -
--complete-objects -
--cooling -
--cut -
--default-acceleration -
--dont-support-bridges -
--duplicate -
--duplicate-grid -
--end-gcode -
--export-svg -
--external-perimeter-speed -
--extra-perimeters -
--extruder-offset -
--extrusion-multiplier -
--extrusion-width -
--fan-always-on -
--filament-diameter -
--fill-angle -
--fill-density -
--fill-pattern -
--first-layer-acceleration -
--first-layer-extrusion-width -
--g0 -
--gap-fill-speed -
--gcode-arcs -
--gcode-comments -
--gcode-flavor -
--gui-mode -
--help -
--infill-acceleration -
--infill-every-layers -
--infill-extruder -
--infill-extrusion-width -
--infill-first -
--infill-only-where-needed -
--infill-speed -
--info -
--layer-gcode -
--layer-height -
--load -
--max-fan-speed -
--merge -
--min-fan-speed -
--min-print-speed -
--min-skirt-length -
--no-plater -
--notes -
--nozzle-diameter -
--only-retract-when-crossing-perimeters -
--ooze-prevention -
--output -
--output-filename-format -
--overhangs -
--perimeter-acceleration -
--perimeter-extruder -
--perimeter-extrusion-width -
--perimeter-speed -
--perimeters -
--post-process -
--print-center -
--raft-layers -
--repair -
--resolution -
--retract-before-travel -
--retract-layer-change -
--retract-length -
--retract-length-toolchange -
--retract-lift -
--retract-restart-extra -
--retract-restart-extra-toolchnage -
--retract-speed -
--rotate -
--save -
--scale -
--seam-position -
--skirt-distance -
--skirt-height -
--skirts -
--small-perimeter-speed -
--solid-infill-below-area -
--solid-infill-every-layers -
--solid-infill-extrusion-width -
--solid-layers -
--spiral-vase -
--standby-temperature-delta -
--start-gcode -
--support-material -
--support-material-angle -
--support-material-enforce-layers -
--support-material-extruder -
--support-material-extrusion-width -
--support-material-interface-extruder -
--support-material-interface-layers -
--support-material-interface-spacing -
--support-material-interface-speed -
--support-material-pattern -
--support-material-spacing -
--support-material-speed -
--support-material-threshold -
--temperature -
--thin-walls -
--toolchange-gcode -
--top-infill-extrusion-width -
--top-solid-layers -
--travel-speed -
--use-firmware-retraction -
--version -
--vibration-limit -
--wipe -
--z-offset -
-m -
-o