sinfo_rec_jitter7

Usage

Overview

This recipe performs science data reduction.

The input files are: science object and sky frames with tags OBJECT_NODDING and SKY_NODDING or Telluric standard star frames and sky frames with tags STD and SKY_STD or PSF standard star and sky frames with tags PSF_CALIBRATOR and SKY_PSF_CALIBRATOR and Master calibration frames: A corresponding (band,preoptics) wavelength map image with tag WAVE_MAP A corresponding (band,preoptics) master flat field with tag MASTER_FLAT_LAMP A corresponding (band,preoptics) master bad pixel map with tag MASTER_BP_MAP A corresponding (band,preoptics) slitlets position frame with tag SLIT_POS A corresponding (band) distortion table with tag DISTORTION A corresponding (band) slitlet distance table with tag SLITLETS_DISTANCE The output is an image resulting from the IMA1 op IMA2 where op indicates A reference table with the position of the first column with tag FIRST_COLUMN Relevant outputs are: combined cubes (PRO.CATG=x_OBS x=STD,OBJ,PSF) reconstructed cube (PRO.CATG=COADD_x_OBS x=STD,OBJ,PSF) An average along Z of the reconstructed cube (PRO.CATG=MED_x_OBS x=STD,OBJ,PSF) The bad pixel map associated to the cube (PRO.CATG=BP_MAP_COADD_x_OBS x=STD,OBJ,PSF)

Options

--gen-overpar <bool>

Overwrite DRS ini parameters: (bool; default: True). The full name of this option for the EsoRex configuration file is sinfoni.general.overwrite_parameters [default = True].

--lc_sw <bool>

Correct for bad lines introduced by instrument software: (bool; default: False). The full name of this option for the EsoRex configuration file is sinfoni.general.lc_sw [default = False].

--lc_kappa <long>

Kappa sigma value (long; default: 18). The full name of this option for the EsoRex configuration file is sinfoni.general.lc_kappa [default = 18].

--lc_filt_rad <long>

Filtering radii applied during median filter. Should be small (long; default: 3). The full name of this option for the EsoRex configuration file is sinfoni.general.lc_filt_rad [default = 3].

--product-density <long>

Density of pipeline products: 0 (low), 1 (low+skycor), 2 (med-QC), 3 (high-debug+skycor) (long; default: 2). The full name of this option for the EsoRex configuration file is sinfoni.product.density [default = 2].

--stack-lo_rej <float>

lower rejection (float; default: 0.1). The full name of this option for the EsoRex configuration file is sinfoni.stacked.low_rejection [default = 0.1].

--stack-hi_rej <float>

higher rejection (float; default: 0.1). The full name of this option for the EsoRex configuration file is sinfoni.stacked.high_rejection [default = 0.1].

--stack-flat_ind <bool>

Flat Index: (bool; default: True). The full name of this option for the EsoRex configuration file is sinfoni.stacked.flat_index [default = True].

--stack-mflat_norm_smooth <long>

Normalize master flat to its smoothed value (to remove lamp response curve). 0 (no smooth). 1 (apply fft filter along y).2 (apply running median filter along y). (long; default: 0). The full name of this option for the EsoRex configuration file is sinfoni.stacked.mflat_norm_smooth [default = 0].

--stack-mflat_smooth_rad <long>

Normalization smoothing radii (long; default: 16). The full name of this option for the EsoRex configuration file is sinfoni.stacked.mflat_smooth_rad [default = 16].

--stack-mask_ind <long>

BP Mask Interpolation Switch: indicates if the bad pixel mask should be applied (1) or not (0) (long; default: 1). The full name of this option for the EsoRex configuration file is sinfoni.stacked.mask_index [default = 1].

--stack-ind_ind <bool>

indicates if the bad pixels should be indicated (yes) or interpolated (no) (bool; default: False). The full name of this option for the EsoRex configuration file is sinfoni.stacked.ind_index [default = False].

--stack-mask_rad <long>

Max distance bad-good pix: (long; default: 4). The full name of this option for the EsoRex configuration file is sinfoni.stacked.mask_rad [default = 4].

--stack-gauss_ind <bool>

Gaussian Convolution Switch: (bool; default: False). The full name of this option for the EsoRex configuration file is sinfoni.stacked.gauss_index [default = False].

--stack-khw <long>

Kernel Half Width (long; default: 2). The full name of this option for the EsoRex configuration file is sinfoni.stacked.kernel_half_width [default = 2].

--stack-warpfix_ind <bool>

Warp Fix Index: (bool; default: True). The full name of this option for the EsoRex configuration file is sinfoni.stacked.warpfix_ind [default = True].

--stack-warpfix_kernel <str>

Warpfix kernel: (str; default: ´tanh´). The full name of this option for the EsoRex configuration file is sinfoni.stacked.warpfix_kernel [default = tanh].

--stack-qc_thresh_min <long>

qc_thresh_min (long; default: 0). The full name of this option for the EsoRex configuration file is sinfoni.stacked.qc_thresh_min [default = 0].

--stack-qc_thresh_max <long>

qc_thresh_max (long; default: 49000). The full name of this option for the EsoRex configuration file is sinfoni.stacked.qc_thresh_max [default = 49000].

--stack-sub_raw_sky <bool>

indicates if the raw sky frame should be subtracted (TRUE) or (FALSE) (bool; default: True). The full name of this option for the EsoRex configuration file is sinfoni.stacked.sub_raw_sky [default = True].

--objnod-aj_method <long>

Method to reduce autojitter template frames Raw frames are object only exposures. object-fake_sky pairs are generated. 0: no sky for all objects (long; default: 1). The full name of this option for the EsoRex configuration file is sinfoni.objnod.autojitter_method [default = 1].

--objnod-scales_sky <bool>

Spatial median (sky) subtraction from cube: (If autojitter_method==1),indicates if the spatial median of each plane should be subtracted (TRUE) or not (FALSE) from each cube plane (bool; default: False). The full name of this option for the EsoRex configuration file is sinfoni.objnod.scales_sky [default = False].

--objnod-ks_clip <bool>

Kappa-sigma clipping of coadded cube: indicates if a kappa-sigma clipping should be performed (TRUE) or not (FALSE) on each plane of the coadded cube (bool; default: True). The full name of this option for the EsoRex configuration file is sinfoni.objnod.ks_clip [default = True].

--objnod-kappa <float>

kappa value for kappa-sigma clipping of coadded cube (float; default: 2.0). The full name of this option for the EsoRex configuration file is sinfoni.objnod.kappa [default = 2.0].

--objnod-size_x <long>

Cube x size: x-pixel size of the final combined data cube,must lie between 64 and 128. If 0 it is computed automatically (long; default: 0). The full name of this option for the EsoRex configuration file is sinfoni.objnod.size_x [default = 0].

--objnod-size_y <long>

Cube y size: y-pixel size of the final combined data cube,must lie between 64 and 128.If 0 it is computed automatically (long; default: 0). The full name of this option for the EsoRex configuration file is sinfoni.objnod.size_y [default = 0].

--objnod-no_coeffs <long>

number of coefficients for the polynomial interpolation (long; default: 3). The full name of this option for the EsoRex configuration file is sinfoni.objnod.n_coeffs [default = 3].

--objnod-ns_ind <bool>

Nord South Index Switch: indicates if the slitlet distances are determined by a north-south-test (TRUE) or slitlet edge fits (FALSE) (bool; default: True). The full name of this option for the EsoRex configuration file is sinfoni.objnod.nord_south_index [default = True].

--objnod-fine_tune_mtd <str>

Fine Tuning Method: indicator for the shifting method to use (P: polynomial interpolation, S: cubic spline interpolation) (str; default: ´P´). The full name of this option for the EsoRex configuration file is sinfoni.objnod.fine_tuning_method [default = P].

--objnod-order <long>

Fine Tuning polynomial order: order of the polynomial if the polynomial interpolation shifting method is used. (long; default: 2). The full name of this option for the EsoRex configuration file is sinfoni.objnod.order [default = 2].

--objnod-lo_rej <float>

lower rejection: percentage of rejected low value pixels for averaging the sky spectra (float; default: 10.0). The full name of this option for the EsoRex configuration file is sinfoni.objnod.low_rejection [default = 10.0].

--objnod-hi_rej <float>

higher rejection: percentage of rejected high value pixels for averaging the sky spectra (float; default: 10.0). The full name of this option for the EsoRex configuration file is sinfoni.objnod.high_rejection [default = 10.0].

--objnod-tol <long>

Tolerance: pixel tolerance, this distance tolerance to the diagonal dividing line is not considered for the sky extraction to be sure to have a clean sky due to positioning tolerance and crossing through pixels (long; default: 2). The full name of this option for the EsoRex configuration file is sinfoni.objnod.tolerance [default = 2].

--objnod-jit_ind <bool>

Jitter Index: jitter mode indicator: TRUE: Auto-Jitter, FALSE: user defined jitterThe size_x size_y kernel_type parameters are only used if jitterInd is set to yes, that means in auto-jittering mode! (bool; default: True). The full name of this option for the EsoRex configuration file is sinfoni.objnod.jitter_index [default = True].

--objnod-kernel_typ <str>

Kernel Type:the name of the interpolation kernel to shift the single cubes to the correct places inside the big combined cube (str; default: ´tanh´). The full name of this option for the EsoRex configuration file is sinfoni.objnod.kernel_type [default = tanh].

--objnod-vllx <long>

Vignetting on llx: pixels vignetted from lower left corner X coordinate of contributing cubes before coaddition (long; default: 0). The full name of this option for the EsoRex configuration file is sinfoni.objnod.vllx [default = 0].

--objnod-vlly <long>

Vignetting on lly: pixels vignetted from lower left corner Y coordinate of contributing cubes before coaddition (long; default: 0). The full name of this option for the EsoRex configuration file is sinfoni.objnod.vlly [default = 0].

--objnod-vurx <long>

Vignetting on urx: pixels vignetted from upper right corner X coordinate of contributing cubes before coaddition (long; default: 0). The full name of this option for the EsoRex configuration file is sinfoni.objnod.vurx [default = 0].

--objnod-vury <long>

Vignetting on ury: pixels vignetted from upper right corner Y coordinate of contributing cubes before coaddition (long; default: 0). The full name of this option for the EsoRex configuration file is sinfoni.objnod.vury [default = 0].

--objnod-fcol <float>

First column offset: (float; default: 0.0). The full name of this option for the EsoRex configuration file is sinfoni.objnod.fcol [default = 0.0].

--objnod-sky_cor <bool>

Sky residuals correction: (bool; default: True). The full name of this option for the EsoRex configuration file is sinfoni.objnod.sky_cor [default = True].

--objnod-flux_cor <bool>

Apply flux correction after rebinning: (bool; default: True). The full name of this option for the EsoRex configuration file is sinfoni.objnod.flux_cor [default = True].

--objnod-mosaic_max_size <long>

Maximum allowed size for cubes mosaic is 100*mosaic_max_size (long; default: 14196). The full name of this option for the EsoRex configuration file is sinfoni.objnod.mosaic_max_size [default = 14196].

--skycor-mask_ws <float>

Starting wavelength for object-sky cross correlation (float; default: 1.4). The full name of this option for the EsoRex configuration file is sinfoni.sinfo_utl_skycor.mask_ws [default = 1.4].

--skycor-mask_we <float>

End wavelength for object-sky cross correlation (float; default: 2.5). The full name of this option for the EsoRex configuration file is sinfoni.sinfo_utl_skycor.mask_we [default = 2.5].

--skycor-min_frac <float>

Threshold value for fraction of spatial pixels to be sky (float; default: 0.8). The full name of this option for the EsoRex configuration file is sinfoni.sinfo_utl_skycor.min_frac [default = 0.8].

--skycor-sky_bkg_filter_width <long>

Width of sky-thermal background pre filter (to remove emission lines before fitting a Black Body). (long; default: 12). The full name of this option for the EsoRex configuration file is sinfoni.sinfo_utl_skycor.sky_bkg_filter_width [default = 12].

--skycor-line_hw <float>

Threshold value for full width in pixels of unresolved emission line. Lines with FWHM smaller than this value are not considered in the object-sky cross correlation and in computation of the optimal sky lines scaling factor (float; default: 4.0). The full name of this option for the EsoRex configuration file is sinfoni.sinfo_utl_skycor.line_half_width [default = 4.0].

--skycor-scale_method <long>

Optimal sky lines scaling factor computation method: amoeba fit (0), maximum likelihood (1) (long; default: 1). The full name of this option for the EsoRex configuration file is sinfoni.sinfo_utl_skycor.scale_method [default = 1].

--skycor-rot_cor <bool>

Computes scaling factor correction due to rotational levels transitions (bool; default: False). The full name of this option for the EsoRex configuration file is sinfoni.sinfo_utl_skycor.rot_cor [default = False].

--skycor-fit_obj_noise <bool>

Do Gaussian fit of object noise (bool; default: False). The full name of this option for the EsoRex configuration file is sinfoni.sinfo_utl_skycor.fit_obj_noise [default = False].

--skycor-niter <long>

Number of iterations of background fit (long; default: 10). The full name of this option for the EsoRex configuration file is sinfoni.sinfo_utl_skycor.niter [default = 10].

--skycor-pshift <float>

Sky spectrum shift towar object (float; default: 0.0). The full name of this option for the EsoRex configuration file is sinfoni.sinfo_utl_skycor.pshift [default = 0.0].

--skycor-llx <long>

Lower left X defining object spectrum location (long; default: 1). The full name of this option for the EsoRex configuration file is sinfoni.sinfo_utl_skycor.llx [default = 1].

--skycor-lly <long>

Lower left Y defining object spectrum location (long; default: 1). The full name of this option for the EsoRex configuration file is sinfoni.sinfo_utl_skycor.lly [default = 1].

--skycor-urx <long>

Upper right X defining object spectrum location (long; default: 64). The full name of this option for the EsoRex configuration file is sinfoni.sinfo_utl_skycor.urx [default = 64].

--skycor-ury <long>

Upper right Y defining object spectrum location (long; default: 64). The full name of this option for the EsoRex configuration file is sinfoni.sinfo_utl_skycor.ury [default = 64].

--skycor-sub_thr_bkg_from_obj <bool>

Subtract thermal background contribute from object spectra. Set it to TRUE if stack-sub_raw_sky is set to FALSE (bool; default: False). The full name of this option for the EsoRex configuration file is sinfoni.sinfo_utl_skycor.sub_thr_bkg_from_obj [default = False].

--std_star-switch <bool>

Switch to activate spectrum extraction (bool; default: True). The full name of this option for the EsoRex configuration file is sinfoni.std_star.switch [default = True].

--std_star-lo_rej <float>

lower rejection (float; default: 0.1). The full name of this option for the EsoRex configuration file is sinfoni.std_star.low_rejection [default = 0.1].

--std_star-hi_rej <float>

high rejection (float; default: 0.1). The full name of this option for the EsoRex configuration file is sinfoni.std_star.high_rejection [default = 0.1].

--std_star-fwhm_fct <float>

Factor to find 2D-Gauss FWHM. The extraction box is: halfbox_x=halfbox_y=fwhm_factor*(fwhm_x+fwhm_y)*0.5 (float; default: 5.0). The full name of this option for the EsoRex configuration file is sinfoni.std_star.fwhm_factor [default = 5.0].

--std_star-conv_ind <bool>

Intensity Conversion Index: (bool; default: True). The full name of this option for the EsoRex configuration file is sinfoni.std_star.conversion_index [default = True].

--std_star-compute_eff <bool>

Compute efficiency: TRUE/FALSE (bool; default: True). The full name of this option for the EsoRex configuration file is sinfoni.std_star.compute_eff [default = True].

--psf-switch <bool>

Switch to activate PSF-related (Strehl/Encircled energy) computation (bool; default: True). The full name of this option for the EsoRex configuration file is sinfoni.psf.switch [default = True].

Note that it is possible to create a configuration file containing these options, along with suitable default values. Please refer to the details provided by the 'esorex --help' command.

Version

sinfo_rec_jitter 2.5.2