sim-torch1
A simulated plasma torch
Usage
loadusr Wn
sim-torch
sim-torch
Overview
A simulated plasma torch for arc-ok testing.
VERSION:
0.1
Pins
sim-torch-rt.cut-noise-in float in (default: 0.75)
|
the maximum amount of noise during cutting (volts) |
|---|---|
sim-torch-rt.cycles-in s32 in (default: 200)
|
the number of cycles that the arc voltage overshoots the cut voltage (cycles) |
sim-torch-rt.on-delay-in s32 in (default: 10)
|
the time from turn on until overshoot begins (cycles) |
sim-torch-rt.offset-in float in
|
the cut voltage offset(volts) |
sim-torch-rt.overshoot-in s32 in (default: 50)
|
the percentage of the cut voltage that the arc voltage overshoots (percent) |
sim-torch-rt.ramp-noise-in float in (default: 5)
|
the maximum amount of noise during overshoot (volts) |
sim-torch-rt.ramp-up-in s32 in (default: 80)
|
percent of 'cycles_in' that the arc voltage ramps up (percent) |
sim-torch-rt.start bit in
|
start the arc |
sim-torch-rt.voltage-in float in (default: 100)
|
the cut voltage (volts) |
sim-torch-rt.voltage-out float out
|
output voltage (volts) |
Releases
Unchanged in 2 releases since Debian 12 (Bookworm).