rocm-smi1

Rocm-smi - a tool to monitor amd accelerators and gpus

Overview

usage: rocm-smi [-h] [-V] [-d DEVICE [DEVICE ...]] [--alldevices] [--showhw] [-a] [-i] [-v] [-e [EVENT ...]]

: [--showdriverversion] [--showtempgraph] [--showfwinfo [BLOCK ...]] [--showmclkrange] [--showmemvendor] [--showsclkrange] [--showproductname] [--showserial] [--showuniqueid] [--showvoltagerange] [--showbus] [--showpagesinfo] [--showpendingpages] [--showretiredpages] [--showunreservablepages] [-f] [-P] [-t] [-u] [--showmemuse] [--showvoltage] [-b] [-c] [-g] [-l] [-M] [-m] [-o] [-p] [-S] [-s] [--showmeminfo TYPE [TYPE ...]] [--showpids [VERBOSE]] [--showpidgpus [SHOWPIDGPUS ...]] [--showreplaycount] [--showrasinfo [SHOWRASINFO ...]] [--showvc] [--showxgmierr] [--showtopo] [--showtopoaccess] [--showtopoweight] [--showtopohops] [--showtopotype] [--showtoponuma] [--showenergycounter] [--shownodesbw] [--showcomputepartition] [--showmemorypartition] [-r] [--resetfans] [--resetprofile] [--resetpoweroverdrive] [--resetxgmierr] [--resetperfdeterminism] [--resetcomputepartition] [--resetmemorypartition] [--setclock TYPE LEVEL] [--setsclk LEVEL [LEVEL ...]] [--setmclk LEVEL [LEVEL ...]] [--setpcie LEVEL [LEVEL ...]] [--setslevel SCLKLEVEL SCLK SVOLT] [--setmlevel MCLKLEVEL MCLK MVOLT] [--setvc POINT SCLK SVOLT] [--setsrange SCLKMIN SCLKMAX] [--setextremum min|max sclk|mclk CLK] [--setmrange MCLKMIN MCLKMAX] [--setfan LEVEL] [--setperflevel LEVEL] [--setoverdrive %] [--setmemoverdrive %] [--setpoweroverdrive WATTS] [--setprofile SETPROFILE] [--setperfdeterminism SCLK] [--setcomputepartition {CPX,SPX,DPX,TPX,QPX,cpx,spx,dpx,tpx,qpx}] [--setmemorypartition {NPS1,NPS2,NPS4,NPS8,nps1,nps2,nps4,nps8}] [--rasenable BLOCK ERRTYPE] [--rasdisable BLOCK ERRTYPE] [--rasinject BLOCK] [--gpureset] [--load FILE | --save FILE] [--autorespond RESPONSE] [--loglevel LEVEL] [--json] [--csv]

AMD ROCm System Management Interface | ROCM-SMI version: 2.2.0

options:

-h, --help: show this help message and exit

--gpureset: Reset specified GPU (One GPU must be specified)

--load FILE: Load Clock, Fan, Performance and Profile settings from FILE

--save FILE: Save Clock, Fan, Performance and Profile settings to FILE

-V, --version: Show version information

-d DEVICE [DEVICE ...], --device DEVICE [DEVICE ...]: Execute command on specified device

Display Options:

--alldevices

--showhw: Show Hardware details

-a, --showallinfo: Show Temperature, Fan and Clock values

Topology:

-i, --showid: Show DEVICE IDs

-v, --showvbios: Show VBIOS version

-e [EVENT ...], --showevents [EVENT ...]: Show event list

--showdriverversion: Show kernel driver version

--showtempgraph: Show Temperature Graph

--showfwinfo [BLOCK ...]: Show FW information

--showmclkrange: Show mclk range

--showmemvendor: Show GPU memory vendor

--showsclkrange: Show sclk range

--showproductname: Show product details

--showserial: Show GPU's Serial Number

--showuniqueid: Show GPU's Unique ID

--showvoltagerange: Show voltage range

--showbus: Show PCI bus number

Pages information:

--showpagesinfo: Show retired, pending and unreservable pages

--showpendingpages: Show pending retired pages

--showretiredpages: Show retired pages

--showunreservablepages: Show unreservable pages

Hardware-related information:

-f, --showfan: Show current fan speed

-P, --showpower: Show current average or instant socket graphics package power consumption

-t, --showtemp: Show current temperature

-u, --showuse: Show current GPU use

--showmemuse: Show current GPU memory used

--showvoltage: Show current GPU voltage

Software-related/controlled information:

-b, --showbw: Show estimated PCIe use

-c, --showclocks: Show current clock frequencies

-g, --showgpuclocks: Show current GPU clock frequencies

-l, --showprofile: Show Compute Profile attributes

-M, --showmaxpower: Show maximum graphics package power this GPU will consume

-m, --showmemoverdrive: Show current GPU Memory Clock OverDrive level

-o, --showoverdrive: Show current GPU Clock OverDrive level

-p, --showperflevel: Show current DPM Performance Level

-S, --showclkvolt: Show supported GPU and Memory Clocks and Voltages

-s, --showclkfrq: Show supported GPU and Memory Clock

--showmeminfo TYPE [TYPE ...]: Show Memory usage information for given block(s) TYPE

--showpids [VERBOSE]: Show current running KFD PIDs (pass details to VERBOSE for detailed information)

--showpidgpus [SHOWPIDGPUS ...]: Show GPUs used by specified KFD PIDs (all if no arg given)

--showreplaycount: Show PCIe Replay Count

--showrasinfo [SHOWRASINFO ...]: Show RAS enablement information and error counts for the specified block(s) (all if no arg given)

--showvc: Show voltage curve

--showxgmierr: Show XGMI error information since last read

--showtopo: Show hardware topology information

--showtopoaccess: Shows the link accessibility between GPUs

--showtopoweight: Shows the relative weight between GPUs

--showtopohops: Shows the number of hops between GPUs

--showtopotype: Shows the link type between GPUs

--showtoponuma: Shows the numa nodes

--showenergycounter: Energy accumulator that stores amount of energy consumed

--shownodesbw: Shows the numa nodes

--showcomputepartition: Shows current compute partitioning

--showmemorypartition: Shows current memory partition

Set options:

`--setclock TYPE LEVEL`	Set Clock Frequency Level(s) for specified clock (requires manual Perf level)
`--setsclk LEVEL [LEVEL ...]`	Set GPU Clock Frequency Level(s) (requires manual Perf level)
`--setmclk LEVEL [LEVEL ...]`	Set GPU Memory Clock Frequency Level(s) (requires manual Perf level)
`--setpcie LEVEL [LEVEL ...]`	Set PCIE Clock Frequency Level(s) (requires manual Perf level)
`--setslevel SCLKLEVEL SCLK SVOLT`	Change GPU Clock frequency (MHz) and Voltage (mV) for a specific Level
`--setmlevel MCLKLEVEL MCLK MVOLT`	Change GPU Memory clock frequency (MHz) and Voltage for (mV) a specific Level
`--setvc POINT SCLK SVOLT`	Change SCLK Voltage Curve (MHz mV) for a specific point
`--setsrange SCLKMIN SCLKMAX`	Set min and max SCLK speed
`--setextremum min\|max sclk\|mclk CLK`	Set min/max of SCLK/MCLK speed
`--setmrange MCLKMIN MCLKMAX`	Set min and max MCLK speed

--setfan LEVEL: Set GPU Fan Speed (Level or %)

--setperflevel LEVEL: Set Performance Level

--setoverdrive %: Set GPU OverDrive level (requires manual|high Perf level)

--setmemoverdrive %: Set GPU Memory Overclock OverDrive level (requires manual|high Perf level)

--setpoweroverdrive WATTS: Set the maximum GPU power using Power OverDrive in Watts

--setprofile SETPROFILE: Specify Power Profile level (#) or a quoted string of CUSTOM Profile attributes "# # # #..." (requires manual Perf level)

--setperfdeterminism SCLK: Set clock frequency limit to get minimal performance variation

--setcomputepartition {CPX,SPX,DPX,TPX,QPX,cpx,spx,dpx,tpx,qpx}: Set compute partition

--setmemorypartition {NPS1,NPS2,NPS4,NPS8,nps1,nps2,nps4,nps8}: Set memory partition

`--rasenable BLOCK ERRTYPE`	Enable RAS for specified block and error type
`--rasdisable BLOCK ERRTYPE`	Disable RAS for specified block and error type

--rasinject BLOCK: Inject RAS poison for specified block (ONLY WORKS ON UNSECURED BOARDS)

Reset options:

-r, --resetclocks: Reset clocks and OverDrive to default

--resetfans: Reset fans to automatic (driver) control

--resetprofile: Reset Power Profile back to default

--resetpoweroverdrive: Set the maximum GPU power back to the device default state

--resetxgmierr: Reset XGMI error count

--resetperfdeterminism: Disable performance determinism

--resetcomputepartition: Resets to boot compute partition state

--resetmemorypartition: Resets to boot memory partition state

Auto-response options:

--autorespond RESPONSE: Response to automatically provide for all prompts (NOT RECOMMENDED)

Output options:

--loglevel LEVEL: How much output will be printed for what program is doing, one of debug/info/warning/error/critical

--json: Print output in JSON format

--csv: Print output in CSV format

Releases

2 releases since Debian 12 (Bookworm); the text changed 1 time.

--resetcomputepartition since Debian 13 (Trixie); --resetmemorypartition since Debian 13 (Trixie); --setcomputepartition since Debian 13 (Trixie); --setmemorypartition since Debian 13 (Trixie); --showcomputepartition since Debian 13 (Trixie); --showmemorypartition since Debian 13 (Trixie); --shownodesbw since Debian 13 (Trixie); --showtempgraph since Debian 13 (Trixie); --showtopoaccess since Debian 13 (Trixie); --version since Debian 13 (Trixie); -V since Debian 13 (Trixie).