radeontop1
Tool to show gpu utilization
Usage
radeontop [-chmv]
[-b
bus]
[-d
file]
[-l
limit]
[-i
secs]
[-p
device]
[-t
ticks]
Overview
RadeonTop shows the utilization of your GPU, both in general and by blocks.
Supported cards are R600 and up.
Options
-
-b, --bus bus -
If you have multiple cards, use this parameter to select a specific one. For lspci output 01:00.0 VGA compatible controller, bus would be 1.
-
-c, --color -
Enables colorized output.
-
-d, --dump file -
Instead of displaying the data, dump it to file. Use - for stdout. The file is appended to, so it’s safe to specify the same filename for consecutive runs.
Use SIGTERM or SIGINT for graceful termination.
-
-h, --help -
Displays help.
-
-i, --dump-interval seconds -
Wait for N seconds between data output.
-
-l, --limit limit -
Quit after dumping limit lines. Only valid in dump mode. Default is to dump until terminated; use SIGTERM or SIGINT for graceful termination.
-
-m, --mem -
Forces the use of the /dev/mem path, in case autodetection fails. Useful for the proprietary driver.
-
-p, --path device -
Open the DRM device node specified by device path. Usually it is located at /dev/dri/card0 or /dev/drm0. If this option used, --bus and --mem are ignored.
-
-t, --ticks ticks -
How many times per second to sample the data. The default is 120. Higher numbers mean more accurate output and more overhead.
-
-v, --version -
Displays the program version.
Interactive commands
C, c
Toggle colorized output.
Q, q
Quit.
Resources
See http://github.com/clbr/radeontop
Releases
7 releases since Debian 8 (Jessie); the text changed 3 times.
--dump-interval since Debian 11 (Bullseye);
--mem since Debian 10 (Buster);
--path since Debian 11 (Bullseye);
-i since Debian 11 (Bullseye);
-m since Debian 10 (Buster);
-p since Debian 11 (Bullseye).