pbmtog31

Usage

Overview

This program is part of Netpbm(1) .

pbmtog3 reads a PBM image as input and produces a Group 3 MH fax file as output.

You can also generate a TIFF file that uses the same encoding inside, with pamtotiff.

There is no program in Netpbm that generates other fax formats, such as MR and MMR, but pamtotiff can generate TIFF files that use those encodings.

Options

In addition to the options common to all programs based on libnetpbm (most notably -quiet, see
Common Options ⟨index.html#commonoptions⟩ ), pbmtog3 recognizes the following command line options:

-reversebits

This option causes the output to have the bits in every byte reversed so the least significant bit becomes the most significant bit. Some fax modems expect bits in reverse order, and this compensates for that. If you get a whole bunch of "bad code word" messages when you try to read the G3 file (e.g. with g3topbm), try using this option. Note that the output is not G3 when you use this option.

-nofixedwidth

Most fax machines expect the image to be 1728 columns wide, so pbmtog3 cuts the output to this width by default. If you want to keep the width of the original image, use this option.

This option was new in Netpbm 10.6 (July 2002). Before that, pbmtog3 always kept the width of the original image.

-align8

-align16

These options say to align output rows to 8-bit or 16-bit boundaries, respectively, by adding padding bits in front of EOL codes

Without these options, pbmtog3 adds no padding and rows may begin and ends anywhere within a byte.

You cannot specify both.

These options were new in Netpbm 10.79 (June 2017).

Document source

This manual page was generated by the Netpbm tool 'makeman' from HTML source. The master documentation is at

http://netpbm.sourceforge.net/doc/pbmtog3.html