otbcli_DisparityMapToElevationMap1

Parameters:

-progress

<boolean> Report progress

-io.in <string> Input disparity map (mandatory)
-io.left <string> Left sensor image (mandatory)
-io.right <string> Right sensor image (mandatory)
-io.lgrid <string> Left Grid (mandatory)
-io.rgrid <string> Right Grid (mandatory)
-io.out <string> [pixel] Output elevation map [pixel=uint8/uint16/int16/uint32/int32/float/double] (default value is float) (mandatory)

-io.mask

<string> Disparity mask (optional, off by default)

-step

<float> DEM step (mandatory, default value is 5)

-hmin

<float> Minimum elevation expected (mandatory, default value is 0)

-hmax

<float> Maximum elevation expected (mandatory, default value is 100)

-elev.dem

<string> DEM directory (optional, off by default)

-elev.geoid

<string> Geoid File (optional, off by default)

-elev.default <float>

Default elevation (mandatory, default value is 0)

-ram

<int32> Available RAM (Mb) (optional, off by default, default value is 128)

-inxml

<string> Load otb application from xml file (optional, off by default)