nvme_fw_commit_ca-libnvme32
Firmware commit - commit action
Usage
enum nvme_fw_commit_ca {
NVME_FW_COMMIT_CA_REPLACE ,
NVME_FW_COMMIT_CA_REPLACE_AND_ACTIVATE ,
NVME_FW_COMMIT_CA_SET_ACTIVE ,
NVME_FW_COMMIT_CA_REPLACE_AND_ACTIVATE_IMMEDIATE ,
NVME_FW_COMMIT_CA_REPLACE_BOOT_PARTITION ,
NVME_FW_COMMIT_CA_ACTIVATE_BOOT_PARTITION
};
Constants
- NVME_FW_COMMIT_CA_REPLACE
-
Downloaded image replaces the existing image, if any, in the specified Firmware Slot. The newly placed image is not activated.
- NVME_FW_COMMIT_CA_REPLACE_AND_ACTIVATE
-
Downloaded image replaces the existing image, if any, in the specified Firmware Slot. The newly placed image is activated at the next Controller Level Reset.
- NVME_FW_COMMIT_CA_SET_ACTIVE
-
The existing image in the specified Firmware Slot is activated at the next Controller Level Reset.
- NVME_FW_COMMIT_CA_REPLACE_AND_ACTIVATE_IMMEDIATE
-
Downloaded image replaces the existing image, if any, in the specified Firmware Slot and is then activated immediately. If there is not a newly downloaded image, then the existing image in the specified firmware slot is activated immediately.
- NVME_FW_COMMIT_CA_REPLACE_BOOT_PARTITION
-
Downloaded image replaces the Boot Partition specified by the Boot Partition ID field.
- NVME_FW_COMMIT_CA_ACTIVATE_BOOT_PARTITION
-
Mark the Boot Partition specified in the BPID field as active and update BPINFO.ABPID.