nvme-ocp-hardware-component-log1

Usage

nvme [<global-options>] ocp hardware-component-log <device>
                        [--comp-id=<num> | -i <num>]
                        [--list | -l]

Overview

Retrieve hardware component log.

The <device> parameter is mandatory NVMe character device (ex: /dev/nvme0).

This will only work on OCP compliant devices supporting this feature. Results for any other device are undefined.

On success it returns 0, error code otherwise.

Options

-i <num>, --comp-id=<num>

component identifier

Value	Definition
0x0000	Reserved
0x0001 | asic	Controller ASIC component
0x0002 | nand	NAND Component
0x0003 | dram	DRAM Component
0x0004 | pmic	PMIC Component
0x0005 | pcb	PCB Component
0x0006 | cap	capacitor component
0x0007 | reg	registor component
0x0008 | case	case component
0x0009 | sn	Device Serial Number
0x000A | country	Country of Origin
0x000B | hw-rev	Global Device Hardware Revision
0x000C-0x7FFF	Reserved
0x8000 | vendor	Vendor Unique Component
0x8001-0xFFFF	Vendor Unique Component

-l, --list

list component descriptions

Options

The following options are defined at the top-level nvme command and are available to this subcommand:

--dry-run

Print the command that would be executed, but do not actually execute it.

--no-ioctl-probing

Disable probing for 64-bit IOCTL support.

--no-retries

Disable retry logic on transient errors.

-o <fmt>, --output-format=<fmt>

Set the reporting format to normal, tabular, 'json, or binary. Only one output format may be used at a time.

--output-format-version=<version>

Select the output format version. Version 1 uses the original field naming, while version 2 (default) provides more consistent and script-friendly field names. Other versions are rejected.

--quiet

Suppress informational messages. Errors are still reported, and --quiet cancels any --verbose for the library log level.

--set-options=<key=value>[,<key=value>...]

Set libnvme library options for this invocation. Supported keys are force-4k, mi-probe-enabled, test-base-dir and test-sysfs-dir.

--timeout=<ms>

Set the timeout for the command in milliseconds. infinite or -1 waits without a time limit (0xffffffff).

-v, --verbose

Increase the level of detail in the output. May be specified multiple times to further increase verbosity.

These options can also be set as machine-wide defaults in nvme-cli.conf(5). A command-line flag always overrides the file.

Examples

# nvme ocp hardware-component-log /dev/nvme0

# nvme ocp hardware-component-log /dev/nvme0 -i asic -l

Nvme

Part of the nvme-user suite.