newvictron8
Driver for imv/victron ups unit match, match lite, netups
Note
This man page only documents the hardware-specific features of the the newvictron driver. For information about the core driver, see nutupsdrv(8).
Supported hardware
newvictron should recognize all Victron models that use a serial protocol at 1200 bps. These include Match Lite, Match and the NetUps line.
The Match Lite line may only report a handful of variables. This is usually not a bug - they just don't support anything else.
Cabling
If your Victron cable is broken or missing, use this diagram to build a clone:
docs/cables/victron.txt
Extra arguments
This driver supports the following optional values for -x and in the ups.conf(5):
modelname=<name>
|
Set model name |
|---|---|
usd=delay
|
Set delay before shutdown on UPS |