mrtg-load1
Returns the current load or uptime data
Usage
mrtg-load (
[{-l
1 | 5 | 15}]
[-m
multiplier]
)*2
Overview
mrtg-load returns the system load averages for the past 1, 5, or 15 minutes. The output is written in a form useful as input for the MRTG utility. Every parameter can be accepted twice and allow to control the two values in the output.
-
-l 1|5|15 -
Sets the system load average to display in the output. If none is set, only the 5 minutes average with be displyed in the second position.
-
-m multiplier -
Sets the multiplier to be used in the output. For example, with a load of 1.2 and a multiplier of 100, the output load average would be 120. Note that the option order is important. If it is defined once, affect both output values. The default multiplier is 1.
Examples
Prints the 5-minute average of the system load, multiplied by 100.
mrtg-load -m 100
Prints the 1-minute and 15-minute averages of the system load. The firs one multipled by 10, the second one by 100.
mrtg-load -l 1 -m 10 -l 15 -m 100
Releases
12 releases since Debian 3.0 (Woody); the text changed 6 times.
-l since Debian 9 (Stretch);
-m since Debian 9 (Stretch).