mount_ffs8
Mount a berkeley fast file system
Usage
mount_ffs [-o
options]
special
node
Overview
The mount_ffs command attaches the Berkeley Fast File System on the special device on to the file system tree at point node.
This command is invoked by mount(8) when using any of the following syntax:
mount [options] special node
mount [options] -t ffs special node
The special device is either a disklabel(8) UID (DUID) or an entry in /dev. If it is a DUID, it will be automatically mapped to the appropriate entry in /dev. In either case the partition must be present in the disklabel loaded from the device. The partition name is the last letter in the entry name. For example, /dev/sd0a and 3eb7f9da875cb9ee.a both refer to the ‘a’ partition.
This command is normally executed per file system by rc(8) at boot time using the mount(8) command. The options are as follows:
-
-o options -
Options are specified with a
-oflag followed by a comma separated string of options. See the mount(8) man page for possible options and their meanings.
Releases
61 releases since OpenBSD 2.1; the text changed 13 times.